ATSAMD51J20A-MUT-EFP vs ATSAMD51G19A-MFT Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ATSAMD51J20A-MUT-EFP disebabkan oleh Microchip Technology dan ATSAMD51G19A-MFT disebabkan oleh Microchip Technology. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Microchip Technology
ATSAMD51J20A-MUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 64-VQFN | Microchip
ATSAMD51J20A-MUT-EFP ✓ AktifMicrochip Technology
ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51G19A-MFT ✓ AktifPengandingan Spesifikasi
| Parametr | ATSAMD51J20A-MUT-EFP | ATSAMD51G19A-MFT |
|---|---|---|
| Merek | Microchip Technology | Microchip Technology |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | ARM Cortex-M4F with FPU | ARM Cortex-M4F with FPU and DSP instructions |
| Frekuensi Klock Maksimum | 120 MHz | — |
| Flash Memory | 1 MB (dual-panel with ECC) | 512 KB (dual-panel with ECC) |
| SRAM | 256 KB (with ECC) | 192 KB (with ECC) |
| Kemasan | 64-VQFN (9x9 mm) with exposed pad | 48-pin VQFN (7x7 mm) |
| Tegangan Pemberi Arus | 1.71 V to 3.63 V | — |
| Suhu Operasi | -40 C to +85 C (industrial) | -40C to +125C (extended industrial) |
| USB Interface | USB 2.0 Full-Speed with integrated PHY | — |
| CAN-FD | Yes | — |
| ADC | 12-bit, up to 16 channels | 12-bit, up to 1 Msps, up to 16 channels |
| DAC | 12-bit, 2 channels | 10-bit, 300 ksps |
| SERCOM | 8 configurable serial interfaces (UART/SPI/I2C) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL level] | 3 (168 hours) |
| Status RoHS | Compliant | Compliant |
| ECC Support | Yes (Flash + SRAM) | — |
| DMA Channels | [DATA_NEEDED: number of DMA channels] | — |
| I/O Pins | [DATA_NEEDED: GPIO count] | — |
| Maximum CPU Clock | — | 120 MHz |
| Operating Voltage (VDDIO) | — | 1.71 V to 3.63 V |
| USB | — | USB 2.0 Full-Speed device and host (integrated PHY) |
| SERCOM Modules | — | 6 (each configurable as UART/SPI/I2C) |
| Timers | — | 16-bit TC, 32-bit TCC |
| CAN | — | CAN-FD controller |
| External Bus Interface | — | QSPI / SERCOM-based |