CY7C68321-100AXC vs CY7C68321C-56LTXC Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci CY7C68321-100AXC disebabkan oleh Cypress Semiconductor dan CY7C68321C-56LTXC disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

Cypress Semiconductor
CY7C68321-100AXC CY7C68321-100AXC USB 2.0 ATA Bridge | Cypress

CY7C68321-100AXC USB 2.0 ATA Bridge | Cypress

CY7C68321-100AXC ✓ Aktif
Infineon
CY7C68321C-56LTXC CY7C68321C-56LTXC - USB 2.0 ATA Bridge | Infineon

CY7C68321C-56LTXC - USB 2.0 ATA Bridge | Infineon

CY7C68321C-56LTXC ✗ Akhir Hayat

Pengandingan Spesifikasi

Parametr CY7C68321-100AXC CY7C68321C-56LTXC
Merek Cypress Semiconductor Infineon
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Akhir Hidup
Product Type Fixed-function USB 2.0 to ATA/ATAPI bridge IC —
Product Family EZ-USB AT2LP —
USB Interface USB 2.0 —
Maximum USB Data Rate 480 Mbps —
ATA Support ATA and ATAPI device support —
Number of USB Ports 1 port —
Supported Device Configuration CompactFlash and one ATA/ATAPI device —
ATA Bus Sharing High-impedance (Hi-Z) mode supported —
Minimum Operating Voltage 3.15 V —
Maximum Operating Voltage 3.45 V —
Kemasan 100-TQFP (14 x 20 mm) 56-pin QFN exposed-pad, 8 mm x 8 mm
Kiraan Pin 100 pins —
Jenis Pemasangan Surface mount Surface mount
Product Category UART interface IC / USB bridge —
Gambaran Suhu Operasi [DATA_NEEDED: operating temperature range] 0°C to 70°C
Status RoHS [DATA_NEEDED: RoHS status for CY7C68321-100AXC] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Device Type — USB 2.0 to ATA/ATAPI bridge controller
Maximum Operating Frequency — 24 MHz
Low-Speed USB Data Rate — 12 Mb/s
High-Speed USB Data Rate — 480 Mb/s
USB Protocol Support — USB 2.0
USB Speed Support — Full-speed and high-speed
Lead Frame — Non-lead-frame
Interface Function — USB-to-ATA USB 2.0 bridge
Peripheral Interface — ATA/ATAPI
Bilangan Pin — 56 pins
Exposed Pad — Present
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga