PENGUMUMAN PEMBELIAN KALI TERAKHIR: CY7C68321C-56LTXC menyebut akhir hayat. Tarikh pesanan terakhir: Hubungi kami. Lihat bahagian alternatif yang ada →
Infineon

CY7C68321C-56LTXC - USB 2.0 ATA Bridge | Infineon

MPN: CY7C68321C-56LTXC ✗ Akhir Hayat
56-pin QFN exposed-pad, 8 mm x 8 mm Package 24 MHz Speed
MOQ: 1 |

CY7C68321C-56LTXC Ringkasan

The Infineon Technologies CY7C68321C-56LTXC is a USB 2.0 to ATA/ATAPI bridge controller with a maximum operating frequency of 24 MHz, support for 12 Mb/s and 480 Mb/s USB data rates, and a 56-pin QFN exposed-pad package. The device is designed to bridge USB storage traffic to an ATA or ATAPI peripheral interface while supporting full-speed and high-speed USB operation.

A USB-to-ATA bridge is an interface controller that lets a USB host communicate with storage hardware that uses the parallel ATA/ATAPI command and data interface. Within the product hierarchy, the CY7C68321C is a USB interface transceiver and protocol bridge, placing it between USB host controllers and conventional storage peripherals. Its role is to translate USB transactions into compatible ATA/ATAPI operations rather than regulate power or perform storage computation.

Key characteristics include full-speed and high-speed USB operation, a 12 Mb/s low-speed connection rate, a 480 Mb/s high-speed connection rate, and operation from 0°C to 70°C. The non-lead-frame QFN package provides a surface-mount implementation for compact storage peripherals, dongles, and embedded USB storage equipment. The exposed pad supports thermal conduction from the device into the PCB copper area.

The interface architecture makes the CY7C68321C-56LTXC suitable for systems where an embedded storage device must appear as a USB peripheral. Its 24 MHz maximum operating frequency accommodates USB traffic handling and associated interface timing, while the dedicated bridge function reduces the need for an external USB-to-ATA controller. System designers should still validate protocol timing, media compatibility, and power requirements during prototype testing.

Typical implementations include USB-connected removable storage, industrial data-collection equipment, compact embedded storage modules, legacy peripheral upgrade systems, and USB storage adapters. The part is particularly relevant where a board design requires a direct USB-to-ATA interface rather than a general-purpose USB hub or a bridge based on a different storage protocol.

PCB layout is critical around high-speed USB and exposed-pad thermal connections. Place the USB differential pair as a short impedance-controlled route, provide the decoupling specified by the manufacturer datasheet, and connect the exposed pad to an uninterrupted ground-copper region. Validate USB eye diagrams, enumeration behavior, ATA signal integrity, and enclosure or cable reliability in the final system.

This page combines the USB interface, package, temperature, and speed characteristics of the CY7C68321C-56LTXC with application guidance, comparison criteria, and practical replacement considerations. It also identifies where design validation is still required, including exact pin assignments, lifecycle status, environmental qualifications, and protocol-level compatibility of candidate replacements.

Pilihan pengganti yang segera untuk CY7C68321C-56LTXC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera CY7C68321C-56LTXC (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Package Dimensions, USB Interface, Device Type.

Infineon
Package: 56-pin QFN with exposed pad
Product Type: USB 2.0 to ATA/ATAPI fixed-function bridge controller
Package Dimensions: 8 x 8 mm
Bandingkan Dengan CY7C68321C-56LTXC →
Infineon
Package Dimensions: 8 mm x 8 mm
USB Interface: USB 2.0
Device Type: USB-to-ATA/ATAPI bridge controller
Bandingkan Dengan CY7C68321C-56LTXC →
Cypress Semiconductor
Package: 100-TQFP (14 x 20 mm)
Product Type: Fixed-function USB 2.0 to ATA/ATAPI bridge IC
USB Interface: USB 2.0
Bandingkan Dengan CY7C68321C-56LTXC →
Infineon
Product Type: USB 2.0 to ATA/ATAPI bridge controller
Package Dimensions: 8 x 8 mm
USB Interface: USB 2.0 high-speed peripheral
Bandingkan Dengan CY7C68321C-56LTXC →

CY7C68321C-56LFXC

✅ Masuk Drop-In
Infineon
📦 56-pin QFN exposed-pad (8x8 mm)
USB 2.0 to ATA/ATAPI bridge controller · EZ-USB AT2LP · USB 2.0 high-speed peripheral · ATA/ATAPI · 1 ATA/ATAPI device · Supported · USB interface · Supported

Hubungi untuk harga

Lihat Datasheet →

CY7C68300C-56LTXC

✅ Masuk Drop-In
Infineon
📦 56-pin QFN exposed-pad (8x8 mm)
USB-to-ATA/ATAPI bridge controller · USB 2.0 · Full-speed and high-speed · ATA/ATAPI · 3.3 V · 0°C to 70°C · QFN-56 · 8 mm x 8 mm

Hubungi untuk harga

Lihat Datasheet →

CY7C68300B-56LFXC

✅ Masuk Drop-In
Infineon
📦 56-pin QFN exposed-pad (8x8 mm)
USB 2.0 to ATA/ATAPI fixed-function bridge controller · USB 2.0 · 480 Mbps · Full Speed and High Speed · 3.3 V · ATA and ATAPI · 1 port · 1 or 2 devices

Hubungi untuk harga

Lihat Datasheet →

CY7C68321C-56LTXC Spesifikasi

Device Type USB 2.0 to ATA/ATAPI bridge controller
Maximum Operating Frequency 24 MHz
Low-Speed USB Data Rate 12 Mb/s
High-Speed USB Data Rate 480 Mb/s
USB Protocol Support USB 2.0
USB Speed Support Full-speed and high-speed
Gambaran Suhu Operasi 0°C to 70°C
Kemasan 56-pin QFN exposed-pad, 8 mm x 8 mm
Jenis Pemasangan Surface mount
Lead Frame Non-lead-frame
Interface Function USB-to-ATA USB 2.0 bridge
Peripheral Interface ATA/ATAPI
Bilangan Pin 56 pins
Exposed Pad Present

Panduan Konfigurasi Pin CY7C68321C-56LTXC 56-pin qfn exposed-pad, 8 mm x 8 mm

Konfigurasi pin untuk CY7C68321C-56LTXC (56-pin qfn exposed-pad, 8 mm x 8 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 56-pin qfn exposed-pad, 8 mm x 8 mm untuk CY7C68321C-56LTXC

Tiada data garisan pin yang diperoleh untuk CY7C68321C-56LTXC.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CY7C68321C-56LTXC patut untuk 6 aplikasis: USB Removable Storage Adapter, Embedded USB Storage Module, Industrial Data Collection Equipment, USB-to-ATA Peripheral Upgrade, Compact USB Storage Adapter, USB Storage Test and Validation Fixture.

💾

USB Removable Storage Adapter

The CY7C68321C-56LTXC fits a removable-storage adapter because it provides a dedicated USB 2.0 to ATA/ATAPI bridge with 12 Mb/s and 480 Mb/s signaling rates. Place the controller between the USB connector and storage device so the host can enumerate the media without requiring the storage subsystem to implement USB directly. Its 24 MHz maximum operating frequency supports the bridge timing requirements identified in the manufacturer datasheet. The commercial 0°C to 70°C rating suits room-temperature adapters, while the exposed-pad package requires a continuous ground-copper region for heat removal. Validate connector enumeration, suspend and resume behavior, ATA master timing, cable loss, and power-cycling with the intended drive.

🖥️

Embedded USB Storage Module

An embedded USB storage module can use the CY7C68321C-56LTXC to bridge a USB host to an ATA/ATAPI storage device on a compact circuit assembly. The device supports USB 2.0 full-speed and high-speed operation, allowing a design to select 12 Mb/s or 480 Mb/s according to the host link and cable environment. Its 56-pin QFN exposed-pad package reduces board footprint compared with a larger leaded bridge and helps thermal energy move into the PCB. According to the manufacturer datasheet, the maximum operating frequency is 24 MHz and the commercial temperature range is 0°C to 70°C. Prototype testing should cover host compatibility, media initialization, abnormal cable removal, and recovery after bus reset.

🏭

Industrial Data Collection Equipment

The CY7C68321C-56LTXC can serve as the storage interface in industrial data-collection equipment that records locally and transfers data through a USB host. Its USB 2.0 high-speed capability of 480 Mb/s supports faster transfers than the 12 Mb/s low-speed mode, while the ATA/ATAPI side provides a conventional storage-device interface. The 0°C to 70°C rating covers typical indoor industrial environments but does not by itself qualify the part for wider temperature zones. Use a short USB differential pair, provide local decoupling, and couple the exposed pad to a solid ground region. Qualification should include sustained transfer activity, connector cycling, power integrity, and thermal testing at the highest expected enclosure temperature.

🔧

USB-to-ATA Peripheral Upgrade

The CY7C68321C-56LTXC is appropriate for upgrading an existing peripheral that exposes an ATA/ATAPI interface and needs USB connectivity. The bridge function allows a USB host to access the peripheral through USB 2.0 without redesigning the storage side as a native USB device. Both 12 Mb/s and 480 Mb/s USB rates are supported, giving the designer flexibility between link robustness and transfer performance. According to the manufacturer datasheet, the controller has a 24 MHz maximum operating frequency. During reuse of an older board, verify every power, ground, clock, configuration, and signal pin against the official pin table because a matching 56-pin outline alone does not guarantee that the two bridge variants are interchangeable.

🔌

Compact USB Storage Adapter

The CY7C68321C-56LTXC supports a compact USB storage adapter where board area and connector placement are constrained. Its 56-pin QFN exposed-pad package is 8 mm by 8 mm and uses a non-lead-frame surface-mount construction. The controller bridges USB 2.0 to ATA/ATAPI, with full-speed operation at 12 Mb/s and high-speed operation at 480 Mb/s available to the system designer. The maximum operating frequency of 24 MHz provides the stated timing reference for bridge operations. Place input and output decoupling close to their associated supply pins, preserve differential-pair geometry, and avoid placing disruptive switching paths beneath the USB pair. Validate signal integrity with the final connector, cable, enclosure, and storage device.

🧪

USB Storage Test and Validation Fixture

The CY7C68321C-56LTXC can be used in a USB storage test fixture that exposes an ATA/ATAPI device to a USB host for compatibility and performance testing. Its support for 12 Mb/s and 480 Mb/s allows both full-speed and high-speed links to be exercised when the host and peripheral configuration permit them. The 24 MHz maximum operating frequency and 0°C to 70°C operating range make it suitable for a commercial-temperature test fixture. The same-package format also supports compact fixture construction and repeatable exposed-pad thermal layouts. During test-fixture development, verify hot-plug behavior, inrush current, abnormal disconnect handling, media enumeration, sustained-transfer stability, and repeatability across different storage devices.

What is the CY7C68321C-56LTXC?
The CY7C68321C-56LTXC is a USB 2.0 to ATA/ATAPI bridge controller from Infineon Technologies. It translates between a USB host connection and a conventional ATA or ATAPI storage interface. According to the manufacturer datasheet, the device supports full-speed and high-speed USB operation, offers data rates of 12 Mb/s and 480 Mb/s, and uses a maximum operating frequency of 24 MHz. It is intended for USB storage adapters, removable media, and embedded storage systems that require a dedicated USB-to-ATA controller rather than a general-purpose USB interface.
What USB speeds and data rates does CY7C68321C-56LTXC support?
The CY7C68321C-56LTXC supports USB 2.0 full-speed and high-speed operation at 12 Mb/s and 480 Mb/s, respectively. Its maximum operating frequency is 24 MHz. According to the manufacturer datasheet, these rates correspond to the USB low-speed and high-speed signaling capabilities identified for the device. In a storage application, the bridge manages the USB-to-ATA translation while the attached drive or storage subsystem handles the actual media operations. Designers should also evaluate the ATA cable length, connector arrangement, and signal integrity when operating at the faster USB 2.0 rate.
What package does the CY7C68321C-56LTXC use?
The CY7C68321C-56LTXC uses a 56-pin QFN exposed-pad surface-mount package measuring 8 mm by 8 mm. According to the manufacturer datasheet, it is a non-lead-frame package and does not use a conventional lead-frame gull-wing or no-lead peripheral package. The exposed pad must be connected to the PCB ground plane for electrical and thermal performance. Because the exact package drawing is not available through a public manufacturer page here, use the official package drawing and pin table before assigning every signal or defining the exposed-pad copper pattern.
Where can I download the CY7C68321C-56LTXC datasheet PDF?
The CY7C68321C-56LTXC datasheet can be reached through the datasheet page listed for this component and through the Octopart datasheet entry. According to the manufacturer documentation, the document contains the USB interface, ATA/ATAPI behavior, electrical characteristics, package drawing, and pin descriptions. Use the document associated with the exact 56LTXC ordering code when making regulatory, footprint, or protocol decisions. The manufacturer datasheet is the controlling reference for exposed-pad connection, decoupling, operating limits, and USB routing guidance.
Where is the pinout for CY7C68321C-56LTXC?
The pinout for the CY7C68321C-56LTXC is located in the pin-description and package-drawing sections of the manufacturer datasheet. The device has 56 pins and uses a 56-pin QFN exposed-pad package. Use that table to map USB, ATA/ATAPI, clock, power, ground, and configuration signals before PCB routing. Do not infer the exposed pad as a numbered signal solely from the package count; follow the manufacturer drawing for its electrical connection and land pattern. The component database pinout is omitted because a complete manufacturer pin table is not published in the accessible manufacturer product material.
What is the operating temperature range of CY7C68321C-56LTXC?
The CY7C68321C-56LTXC operates from 0°C to 70°C. According to the manufacturer datasheet, this is the device's specified operating-temperature range and identifies the part as suitable for commercial-temperature applications. The range does not by itself establish industrial or automotive suitability. If the enclosure can exceed 70°C, select a device with an explicitly higher rating or derate the system through cooling, thermal resistance control, and careful placement of the exposed pad near a suitable PCB thermal region.
Where can I buy CY7C68321C-56LTXC online?
The CY7C68321C-56LTXC can be requested through XAIPART's Request a Quote form on this page. The form lets buyers confirm current sourcing status, quantity requirements, and expected delivery parameters for the exact CY7C68321C-56LTXC ordering code. Because this is a mature legacy interface controller, availability can vary by lot and package suffix. Do not substitute a similar ATA bridge without checking its USB speed ratings, ATA electrical interface, pinout, clock requirements, exposed-pad connection, firmware expectations, and enclosure-level USB compliance.
What is the price of CY7C68321C-56LTXC?
Current commercial terms for the CY7C68321C-56LTXC are available through the Request a Quote form on this page. The form is the appropriate route for a quote because legacy USB bridge inventory and volume requirements can affect the result. Request the exact CY7C68321C-56LTXC MPN, target quantity, delivery location, and required packaging configuration. Engineering review should confirm USB 2.0 high-speed operation, the 56-pin QFN footprint, the 0°C to 70°C range, and ATA compatibility before the component is released into production.
What is the lead time for CY7C68321C-56LTXC?
The current lead time for CY7C68321C-56LTXC should be confirmed through the Request a Quote form on this page. Lead time depends on available inventory, purchase quantity, date code, and the exact 56LTXC suffix. For a legacy USB-to-ATA bridge, request enough schedule visibility to cover incoming inspection, PCB assembly, firmware validation, and end-product qualification. If production continuity is essential, ask for written lifecycle and traceability information rather than relying only on a temporary stock position.
Is CY7C68321C-56LTXC in stock?
Current stock status for the CY7C68321C-56LTXC should be requested through the Request a Quote form on this page. Stock should be evaluated against the exact MPN, including the C package suffix, because similar AT2LP bridge order codes may use different packaging or qualification options. A stock response should also identify date code, lot traceability, and delivery conditions. Do not treat a listing for another suffix as confirmation that the 56LTXC configuration is immediately available.
What can replace CY7C68321C-56LTXC?
The closest drop-in candidates identified for the CY7C68321C-56LTXC are CY7C68321C-56LFXC, CY7C68300C-56LTXC, and CY7C68300B-56LFXC, subject to a manufacturer-level pin and protocol review. According to the product listing, the target is a 56-pin USB-to-ATA bridge, while the comparison records identify the alternatives as related 56-VQFN AT2LP bridge devices. A true drop-in decision requires identical pin functions, USB and ATA electrical limits, clocking, firmware compatibility, exposed-pad construction, and operating-temperature coverage.
What is the best drop-in replacement for CY7C68321C-56LTXC?
No alternative can be declared universally drop-in without a complete manufacturer pin-table comparison. CY7C68321C-56LFXC is the closest suffix-related candidate because it belongs to the same CY7C68321C family and uses the same 56-pin QFN form, but its exact temperature, lead-time, and qualification details require confirmation. CY7C68300C-56LTXC and CY7C68300B-56LFXC are related 56-VQFN AT2LP bridge devices that may differ in firmware, configuration, or feature behavior. Treat all three as design-review candidates, not automatic replacements.
Can CY7C68300C-56LTXC replace CY7C68321C-56LTXC?
CY7C68300C-56LTXC is a possible replacement candidate, but it should not be treated as confirmed drop-in without validation. The manufacturer-category listings identify both devices as 56-VQFN USB 2.0 AT2LP bridges, which establishes package-family similarity rather than complete interchangeability. Compare pin names, USB and ATA signal levels, operating voltage, clock requirements, configuration pins, exposed-pad treatment, USB descriptors, and storage-device compatibility. The exact differences between these functions are not established by the accessible comparison listing.
When should I choose CY7C68321C-56LTXC over CY7C68300C-56LTXC?
Choose the CY7C68321C-56LTXC when the existing design has already qualified the CY7C68321C function and the 56LTXC suffix meets the required temperature and commercial specifications. Choose CY7C68300C-56LTXC only after its pin configuration, USB descriptors, ATA behavior, clocking, and firmware requirements are shown to match the target application. According to the manufacturer category information, both parts occupy the USB-to-ATA bridge category and use a 56-pin QFN package. That common footprint is useful for PCB reuse, but it does not by itself guarantee behavioral compatibility.
Is CY7C68321C-56LTXC suitable for a USB storage adapter?
The CY7C68321C-56LTXC is suitable for a USB storage adapter that requires a dedicated USB 2.0 to ATA/ATAPI bridge and commercial-temperature operation. Its 480 Mb/s high-speed mode, 24 MHz maximum operating frequency, and 56-pin QFN exposed-pad package align with compact removable-media and embedded-storage designs. According to the manufacturer datasheet, the device provides the USB-to-ATA bridge function. Final approval should follow testing of enumeration, suspend and resume behavior, ATA device compatibility, cable loss, power cycling, and thermal performance in the finished enclosure.
What are the key specifications of CY7C68321C-56LTXC that engineers should know?
The key specifications are USB 2.0 support, 12 Mb/s and 480 Mb/s data rates, a 24 MHz maximum operating frequency, full- and high-speed operation, a 0°C to 70°C range, and a 56-pin QFN exposed-pad package measuring 8 mm by 8 mm. According to the manufacturer datasheet, the component bridges USB to ATA/ATAPI storage. Its non-lead-frame surface-mount construction and exposed thermal pad make exposed-pad layout, USB differential-routing discipline, and decoupling essential to reliable operation.

Data referensi kejuruteraan untuk CY7C68321C-56LTXC — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the CY7C68321C-56LTXC when the design has already qualified the CY7C68321C bridge and requires USB 2.0 full-speed and high-speed operation at 12 Mb/s and 480 Mb/s in a 56-pin QFN exposed-pad package. Its 0°C to 70°C range suits commercial-temperature equipment, while the exposed pad requires careful PCB thermal design. Consider CY7C68321C-56LFXC first when researching a same-family alternative, but verify its suffix-specific electrical, temperature, and procurement conditions. CY7C68300C-56LTXC and CY7C68300B-56LFXC may suit redesigns involving related AT2LP bridge functions, but the published comparison information does not establish complete pin or firmware equivalence. For an existing production board, no alternative should be approved solely from the package outline. Compare the official pin table, electrical limits, ATA behavior, USB descriptors, clocking, exposed-pad connection, and operating-temperature range, then validate enumeration, transfer stability, abnormal-disconnect recovery, and thermal performance.

Perbandingan dengan Gantian

Parametr Produk Ini CY7C68321C-56LFXC CY7C68300C-56LTXC CY7C68300B-56LFXC
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 56-pin QFN exposed-pad (8x8 mm) 56-pin QFN exposed-pad (8x8 mm) - same 56-pin QFN exposed-pad (8x8 mm) - same 56-pin QFN exposed-pad (8x8 mm) - same
Function USB 2.0 to ATA/ATAPI bridge CY7C68321C USB-to-ATA AT2LP bridge USB-to-ATA AT2LP bridge USB-to-ATA AT2LP bridge

Penyeberangsung Jelas

  • Dedicated USB-to-ATA bridge function (vsCY7C68300C-56LTXC)
  • Same CY7C68321C family with alternate suffix (vsCY7C68321C-56LFXC)
  • Commercial-temperature operation with USB 2.0 high speed (vsCY7C68300B-56LFXC)

Catatan Desain

Route the USB differential pair as a short, continuous 90-ohm differential path from the bridge to the USB connector, with no stubs or test pads that materially disturb impedance. Follow the manufacturer land pattern for all 56 terminals and the exposed pad. Keep the USB pair away from switching nodes and high-current return paths. A common layout error is treating the exposed pad as an optional thermal feature rather than part of the package design; attach it to the intended ground network and maintain uninterrupted ground copper beneath and around the device.

Place the decoupling network prescribed by the manufacturer datasheet directly beside the corresponding power and ground pins. Keep supply and return connections short, and avoid sharing narrow copper paths between noisy loads and the bridge. Check USB bus and ATA interface voltage levels before adding external components. Estimated: because the accessible manufacturer material does not state input-voltage tolerances or capacitor values, no component values or dissipation calculation are assumed; use the official electrical-characteristics and layout sections for implementation.

Use the exposed pad as the principal thermal path from the IC into the PCB. Provide a solid ground-copper region, thermal vias where the package construction and land pattern permit them, and adequate copper away from the board edge. Monitor temperature during sustained USB transfers because a bridge operating continuously beside a storage device can combine protocol activity with power-conversion heat. Estimated: no junction-temperature calculation is possible without confirmed supply voltage, load dissipation, and board thermal data; verify the final design with thermocouples or thermal imaging.

Do not treat a shared 56-pin QFN outline as proof of pin-to-pin interchangeability. Before using CY7C68321C-56LFXC, CY7C68300C-56LTXC, or CY7C68300B-56LFXC as a replacement, compare every power pin, ground pin, USB signal, ATA signal, clock input, configuration input, exposed-pad connection, operating-voltage limit, and temperature rating. Also compare firmware and USB descriptor behavior. A successful fit in the same footprint does not compensate for a changed pin function or protocol requirement.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The device is a commercial-temperature USB interface bridge rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer environmental documentation.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

CY7C68321C-56LTXC datasheet CY7C68321C-56LTXC datasheet pdf CY7C68321C-56LTXC pinout CY7C68321C-56LTXC specifications Infineon CY7C68321C-56LTXC CY7C68321C-56LTXC USB 2.0 bridge CY7C68321C-56LTXC 56 QFN CY7C68321C-56LTXC USB storage CY7C68321C-56LTXC equivalent CY7C68321C-56LTXC replacement CY7C68321C-56LTXC vs CY7C68321C-56LFXC CY7C68321C-56LTXC price CY7C68321C-56LTXC stock CY7C68321C-56LTXC application circuit

Komponen dan Tanda berkaitan

Infineon Technologies CY7C68321C-56LTXC CY7C68321C-56LFXC CY7C68300C-56LTXC CY7C68300B-56LFXC USB interface IC USB transceiver USB-to-ATA bridge ATA/ATAPI interface USB 2.0 full-speed USB high-speed USB 480 Mb/s 12 Mb/s 24 MHz 56-pin QFN QFN package family surface mount exposed pad USB storage adapter embedded storage ATA master interface differential pair commercial temperature grade RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ