EPC1LI20 vs EPC2LC20 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci EPC1LI20 disebabkan oleh Altera dan EPC2LC20 disebabkan oleh Altera. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | EPC1LI20 | EPC2LC20 |
|---|---|---|
| Merek | Altera | Altera |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Obsolete | NRND |
| Harga Unit (USD) | — | $7.20 |
| Jenis Ingatan | OTP Configuration PROM (EPROM-based) | Non-volatile configuration PROM |
| Saiz Ingatan | 1 Mb (1,048,576 bits) | 1.6 Mbit |
| Configuration Interface | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Maximum Configuration Clock | 8 MHz | — |
| Supply Voltage (VCC) | 5.0 V (4.75 V to 5.25 V) | — |
| Programming Voltage (VPP) | 12.75 V (typical, factory-programmed via JTAG) | — |
| Kemasan | 20-pin PLCC (J-lead, 9x9 mm) | 20-pin PLCC (J-lead, 9x9 mm) |
| Kiraan Pin | 20 | — |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| Cascading Support | Yes (nCASC pin for multi-device daisy chain) | — |
| Endurance | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) | — |
| JTAG Programming | Yes (in-system via IEEE 1149.1) | — |
| Compatible FPGA Families | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury | — |
| Jenis Pemasangan | Surface Mount (PLCC socket compatible) | Surface Mount |
| Aras MSL | 1 (per Partstack datasheet record) | — |
| Status RoHS | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] | Non-Compliant (original Altera Pb-containing part) |
| Programming Interface | — | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| Cascade Support | — | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |