EPM570T100C4N vs EPM570T100C4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci EPM570T100C4N disebabkan oleh Intel dan EPM570T100C4 disebabkan oleh Intel. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | EPM570T100C4N | EPM570T100C4 |
|---|---|---|
| Merek | Intel | Intel |
| Kategori | FPGA & CPLD | FPGA & CPLD |
| Status Lingkungan Hidup | Aktif | Aktif |
| Family | MAX II | MAX II |
| Series | MAX® II | — |
| Logic Elements / Blocks | 570 | — |
| Macrocells | 440 | 440 |
| Number of User I/O | 76 | — |
| Propagation Delay (tpd) | 5.4 ns (speed grade 4) | — |
| Maximum Internal Frequency | 247.5 MHz | — |
| Process Technology | 0.18 µm | — |
| Supply Voltage - Internal | 2.5 V / 3.3 V | — |
| Programmable Type | In-System Programmable (Flash, non-volatile) | — |
| User Flash Memory | 8 Kbits | 8 Kbits |
| Suhu Operasi | 0 °C to 85 °C (TJ, commercial) | 0C to +85C (commercial) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Kemasan / Case | 100-TQFP (14 x 14 mm) | — |
| Supplier Device Package | 100-TQFP | — |
| Configuration Memory | Internal flash (no external PROM required) | — |
| JTAG / ISP | IEEE 1149.1 compliant | — |
| I/O Bank Voltages | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt) | — |
| Product Status | Active | — |
| Status RoHS | Compliant | Compliant |
| Logic Elements (LEs) | — | 570 |
| Maximum User I/O Pins (this package) | — | 80 |
| Pin-to-Pin Propagation Delay (tPD) | — | 5.4 ns |
| General-Purpose SRAM | — | 4.4 Mbits |
| Core Voltage (VCCINT) | — | 1.8 V |
| I/O Voltage (VCCIO) | — | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt) |
| Kemasan | — | TQFP-100 (T100), 14 x 14 mm |
| Programming Interface | — | JTAG (IEEE 1149.1) - ISP |
| Aras MSL | — | [DATA_NEEDED: MSL Level] |
| On-chip Oscillator | — | Yes (3.3 MHz / 5.5 MHz selectable) |
| Internal Logic Analyzers / ISP | — | JTAG-based in-system programmable, no external boot PROM required |