INA129PG4 vs INA129P Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA129PG4 disebabkan oleh Texas Instruments dan INA129P disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA129PG4 Precision Instrumentation Amplifier | Texas Instruments
INA129PG4 ✓ AktifPengandingan Spesifikasi
| Parametr | INA129PG4 | INA129P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier | — |
| Number of Circuits | 1 circuit | — |
| Kemasan | 8-PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP (PDIP) |
| Packaging | Tube | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Arus Pemberi Arus | 700 µA | — |
| Maximum Supply Voltage | +18 V | — |
| Maximum Offset Voltage | 50 µV | 50 uV |
| Maximum Offset Drift | 0.5 µV/5°C | 0.5 uV/°C |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | 120 dB |
| Maximum Protected Input Voltage | +40 V | — |
| Gain Range | 1 to [DATA_NEEDED: gain-range upper limit] | 1 to 10,000 |
| Input Protection | Protected to +40 V | ±40 V |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Three-op-amp instrumentation-amplifier design |
| Jenis Pemasangan | Through-hole DIP | Through-hole |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Circuit Count | — | 1 |
| Supply Voltage Range | — | ±18 V |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |