INA129PG4 vs INA129P 비교
다음의 상세 나란히 비교: INA129PG4 제조: Texas Instruments 및 INA129P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA129PG4 | INA129P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Instrumentation amplifier | — |
| Number of Circuits | 1 circuit | — |
| 패키지 | 8-PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP (PDIP) |
| Packaging | Tube | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| 공급 전류 | 700 µA | — |
| Maximum Supply Voltage | +18 V | — |
| Maximum Offset Voltage | 50 µV | 50 uV |
| Maximum Offset Drift | 0.5 µV/5°C | 0.5 uV/°C |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | 120 dB |
| Maximum Protected Input Voltage | +40 V | — |
| Gain Range | 1 to [DATA_NEEDED: gain-range upper limit] | 1 to 10,000 |
| Input Protection | Protected to +40 V | ±40 V |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Three-op-amp instrumentation-amplifier design |
| 실장 유형 | Through-hole DIP | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Circuit Count | — | 1 |
| Supply Voltage Range | — | ±18 V |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |