ITS4200SSJDXUMA1 vs BTS5215LAUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ITS4200SSJDXUMA1 disebabkan oleh Infineon dan BTS5215LAUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | ITS4200SSJDXUMA1 | BTS5215LAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET (MINI-PROFET) | — |
| Switch Type | High-Side N-Channel, 1:1 | — |
| On-State Resistance (R_DS(on)) | 200 mOhm (typical) | — |
| Continuous Load Current | 1.2 A | — |
| Supply Voltage (Vbb) | 6 V to 52 V | — |
| Arus Dalam Tentera | 0.8 mA | — |
| Maximum Power Dissipation | 1400 mW | — |
| Suhu Operasi | -40 C to +150 C | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] |
| Kemasan | PG-DSO-8 (DSO-8) | PG-DSO-12-9 |
| Jenis Pemasangan | Surface Mount | — |
| Konfigurasi Output | Single high-side switch | — |
| Protection Features | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage |
| Diagnostic Output | Status pin for fault feedback | — |
| Load Type | Resistive and inductive loads | — |
| Status RoHS | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 90 mΩ typical per channel |
| Continuous Output Current per Channel | — | 3.7 A |
| Operating Voltage Range | — | 8 V to 36 V |
| Standby Current | — | Very low (datasheet value [DATA_NEEDED: standby current uA]) |
| Input Logic Compatibility | — | CMOS-compatible, ground-referenced |
| Diagnostic Feedback | — | Status feedback per channel |
| MOSFET Technology | — | N-channel vertical power MOSFET with charge pump |
| Load Type Support | — | Resistive and inductive loads |
| Demagnetization | — | Fast demagnetization of inductive loads |