LAN8742-CZ vs KSZ8001LI Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LAN8742-CZ disebabkan oleh Microchip Technology dan KSZ8001LI disebabkan oleh Microchip Technology. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ AktifPengandingan Spesifikasi
| Parametr | LAN8742-CZ | KSZ8001LI |
|---|---|---|
| Merek | Microchip Technology | Microchip Technology |
| Kategori | Interface ICs | Ethernet Transceivers |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Product Type | 10/100 Fast Ethernet PHY transceiver | — |
| Maximum Data Rate | 100 Mbps | — |
| Supported Standards | IEEE 802.3 and IEEE 802.3u | — |
| Copper Modes | 10BASE-T and 100BASE-TX | — |
| Host Interface | RMII | MII, RMII, SMII (selectable via strap pins) |
| Driver/Receiver Configuration | 1/1 | — |
| I/O Voltage | 1.2 V and 3.3 V | — |
| Kemasan | 24-pin QFN, 4 x 4 mm | 48-LQFP (7 x 7 mm) |
| Auto-Negotiation | Supported | IEEE 802.3u Clause 28 |
| Auto-MDIX | HP Auto-MDIX supported | Yes (HP Auto-MDIX) |
| Cable Diagnostics | Supported | LinkMD TDR, up to 200 m, ±2 m accuracy |
| Energy Efficient Ethernet | IEEE 802.3az family support identified | — |
| Wake-On-LAN | Supported for the LAN8742 family | — |
| Operating Speed Modes | 10 Mbps and 100 Mbps | — |
| Duplex Operation | Full-duplex RMII support identified | — |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant (RoHS3 per distributor data) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Fungsi | — | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver |
| Number of Drivers/Receivers | — | [DATA_NEEDED: explicit count] |
| Supply Voltage (Analog) | — | 3.3 V |
| Supply Voltage (Core) | — | 1.8 V (internal LDO from 3.3 V) |
| Supply Voltage (VDDIO) | — | 3.3 V or 2.5 V |
| Typical Power Consumption | — | 172 mW |
| Cable Reach (TX/Copper) | — | 130 m+ standard Cat-5 |
| Fiber Support | — | 100BASE-FX via external transceiver |
| Reference Clock | — | 25 MHz (50 MHz for RMII) |
| Packaging | — | Tape & Reel (-TR suffix) |
| Lead-Free | — | Yes |
| Aras MSL | — | [DATA_NEEDED: MSL rating] |