LM2901M vs LM2901NG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM2901M disebabkan oleh Texas Instruments dan LM2901NG disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
LM2901M - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM2901M ✓ AktifPengandingan Spesifikasi
| Parametr | LM2901M | LM2901NG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | 4-channel differential analog comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Single-Supply Operating Voltage Range | 2 V to 36 V | — |
| Dual-Supply Operating Voltage Range | Approximately ±1 V to ±18 V | — |
| Typical Response Time | 1.3 µs | — |
| Jenis Output | Open-collector | Open collector |
| Typical Supply Current Drain | 800 µA | — |
| Typical Input Bias Current | 25 nA | — |
| Typical Input Offset Voltage | 7 mV | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Low-Level Compatibility | Compatible with TTL, MOS, and CMOS logic | — |
| Kemasan | 14-pin SOIC | — |
| Jenis Pemasangan | Surface Mount | Through-hole |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40°C to 105°C |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict-Minerals Status | [DATA_NEEDED: conflict-minerals compliance status] | — |
| Operating Principle | Single-supply or dual-supply operation | — |
| Supply Voltage Range | — | 3 V to 36 V |
| Supply Configuration | — | Single supply |
| Logic Compatibility | — | TTL and CMOS |
| Output Saturation Voltage | — | 130 mV at 4 mA |
| Common-Mode Input Range | — | Includes ground |
| Input ESD Protection | — | ESD clamps on inputs |
| Package Type | — | 14-pin PDIP |
| Manufacturer | — | onsemi |
| Device Classification | — | Standard general-purpose comparator |
| Typical Applications | — | Level detection, low-level sensing, and memory applications |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |