LM2901M vs LM2901NG So sánh
So sánh chi tiết song song của LM2901M bằng Texas Instruments và LM2901NG bằng onsemi. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2901M - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM2901M ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2901M | LM2901NG |
|---|---|---|
| Thương hiệu | Texas Instruments | onsemi |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | 4-channel differential analog comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Single-Supply Operating Voltage Range | 2 V to 36 V | — |
| Dual-Supply Operating Voltage Range | Approximately ±1 V to ±18 V | — |
| Typical Response Time | 1.3 µs | — |
| Kiểu đầu ra | Open-collector | Open collector |
| Typical Supply Current Drain | 800 µA | — |
| Typical Input Bias Current | 25 nA | — |
| Typical Input Offset Voltage | 7 mV | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Low-Level Compatibility | Compatible with TTL, MOS, and CMOS logic | — |
| Hộp | 14-pin SOIC | — |
| Kiểu lắp đặt | Surface Mount | Through-hole |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | -40°C to 105°C |
| Trạng thái RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict-Minerals Status | [DATA_NEEDED: conflict-minerals compliance status] | — |
| Operating Principle | Single-supply or dual-supply operation | — |
| Supply Voltage Range | — | 3 V to 36 V |
| Supply Configuration | — | Single supply |
| Logic Compatibility | — | TTL and CMOS |
| Output Saturation Voltage | — | 130 mV at 4 mA |
| Common-Mode Input Range | — | Includes ground |
| Input ESD Protection | — | ESD clamps on inputs |
| Package Type | — | 14-pin PDIP |
| Manufacturer | — | onsemi |
| Device Classification | — | Standard general-purpose comparator |
| Typical Applications | — | Level detection, low-level sensing, and memory applications |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Điện áp cung cấp | — | [DATA_NEEDED: supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |