LM324ADR2G vs LM324ADRG4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM324ADR2G disebabkan oleh onsemi dan LM324ADRG4 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM324ADR2G | LM324ADRG4 |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Supply Voltage Range (Single) | 3 V to 32 V | — |
| Supply Voltage Range (Split) | ±1.5 V to ±16 V | — |
| Gain Bandwidth Product | 1 MHz | — |
| Slew Rate | 0.6 V/µs | 0.5 V/us |
| Input Offset Voltage (Max) | 3 mV | — |
| Input Offset Voltage (Typ) | [DATA_NEEDED: Input Offset Voltage typical] | — |
| Technology | Bipolar | — |
| Kemasan / Case | 14-SOIC (0.154in, 3.90mm Width) | — |
| Jenis Pemasangan | Surface Mount | Surface mount |
| Suhu Operasi | 0C to +70C (Commercial) | — |
| Packaging | Tape & Reel (R2G suffix) | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Supply Current (per amp, typical) | [DATA_NEEDED: Supply Current] | — |
| Product Type | — | Quadruple operational amplifier |
| Number of Amplifier Circuits | — | 4 circuits |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Minimum Total Supply Voltage | — | ±1.5 V |
| Maximum Total Supply Voltage | — | ±16 V |
| Typical Supply Current Drain | — | 0.8 mA |
| Common-Mode Input Range | — | Includes ground |
| Amplifier Architecture | — | Four independent, high-gain, frequency-compensated amplifiers |
| Supply Configuration | — | Single supply or split supply |
| Kemasan | — | 14-pin SOIC |
| Kiraan Pin | — | 14 pins |
| Gambaran Suhu Operasi | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |