LM324ADR2G vs LM324ADRG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM324ADR2G tarafından onsemi ve LM324ADRG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM324ADR2G | LM324ADRG4 |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Supply Voltage Range (Single) | 3 V to 32 V | — |
| Supply Voltage Range (Split) | ±1.5 V to ±16 V | — |
| Gain Bandwidth Product | 1 MHz | — |
| Slew Rate | 0.6 V/µs | 0.5 V/us |
| Input Offset Voltage (Max) | 3 mV | — |
| Input Offset Voltage (Typ) | [DATA_NEEDED: Input Offset Voltage typical] | — |
| Technology | Bipolar | — |
| Paket / Kas | 14-SOIC (0.154in, 3.90mm Width) | — |
| Montaj Türü | Surface Mount | Surface mount |
| İşletim Sıcaklığı | 0C to +70C (Commercial) | — |
| Packaging | Tape & Reel (R2G suffix) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Supply Current (per amp, typical) | [DATA_NEEDED: Supply Current] | — |
| Product Type | — | Quadruple operational amplifier |
| Number of Amplifier Circuits | — | 4 circuits |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Minimum Total Supply Voltage | — | ±1.5 V |
| Maximum Total Supply Voltage | — | ±16 V |
| Typical Supply Current Drain | — | 0.8 mA |
| Common-Mode Input Range | — | Includes ground |
| Amplifier Architecture | — | Four independent, high-gain, frequency-compensated amplifiers |
| Supply Configuration | — | Single supply or split supply |
| Paket | — | 14-pin SOIC |
| Pin Sayısı | — | 14 pins |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |