MAX197AENI vs MAX194BCPE Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MAX197AENI disebabkan oleh Maxim Integrated dan MAX194BCPE disebabkan oleh Maxim Integrated. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Maxim Integrated
MAX194BCPE - 14-Bit 85ksps SAR ADC | Maxim Integrated / Analog Devices
MAX194BCPE ObsoletePengandingan Spesifikasi
| Parametr | MAX197AENI | MAX194BCPE |
|---|---|---|
| Merek | Maxim Integrated | Maxim Integrated |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Pemecahkatan | 12 bits | 14 bit |
| Number of Channels | 8 | 1 |
| kadar sampling | 100 ksps | 85 ksps |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation) with capacitive DAC |
| Tegangan Pemberi Arus | Single +5 V ±5% | — |
| Analog Input Ranges | ±10 V, ±5 V, 0-10 V, 0-5 V (software selectable) | — |
| Integral Nonlinearity (INL) | ±0.5 LSB (A grade) | 1/2 LSB (max) |
| Internal Reference | 4.096 V | — |
| External Reference Support | Yes (1.0 V to 4.096 V) | — |
| Input Overvoltage Protection | ±25 V (without damage) | — |
| Digital I/O Compatibility | TTL/CMOS | — |
| Lebar Bus Data | 8-bit (with 8+4 mode) | — |
| Kemasan | 28-pin PDIP (N) | — |
| Suhu Operasi | -40 °C to +85 °C (industrial) | — |
| Conversion Mode | Software/Hardware trigger | — |
| Status RoHS | Non-compliant (PDIP package) | Non-compliant (PE suffix = PDIP with SnPb lead finish) |
| Conversion Time | — | 9.4 us |
| Signal-to-Noise and Distortion (SINAD) | — | 82 dB at 5 kHz input |
| Arus penyah hidup | — | 10 uA |
| Analog Input Range | — | Unipolar 0V to VREF; Bipolar -VREF to +VREF |
| Antaramuka | — | Serial (SPI / QSPI / MICROWIRE compatible) |
| Reference Voltage Input | — | External (dedicated VREF pin) |
| Supply Voltage (VDD) | — | 5 V (analog) + 3 V to 5.25 V (VLOGIC) |
| Kemasan / Case | — | 16-pin PDIP (PE) - through-hole |
| Gambaran Suhu Operasi | — | 0C to +70C (commercial, C grade) |
| Jenis Pemasangan | — | Through-Hole DIP |
| Track/Hold | — | Built-in |
| Auto-Calibration | — | Yes, internal (linearity + offset) |