MK24FN1M0VDC12 vs MK24FN1M0VLL12 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MK24FN1M0VDC12 disebabkan oleh NXP Semiconductors dan MK24FN1M0VLL12 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12 ✓ Aktif
Pengandingan Spesifikasi
| Parametr | MK24FN1M0VDC12 | MK24FN1M0VLL12 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | ARM Cortex-M4F (32-bit) | — |
| Frekuensi Klock Maksimum | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 256 KB | 256 KB |
| Kemasan | 121-XFBGA (8x8 mm, 0.5 mm pitch) | 100-LQFP (LL) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Suhu Operasi | -40C to +105C (industrial) | — |
| USB | Full-Speed USB 2.0 on-chip transceiver | — |
| ADC | 16-bit successive-approximation, configurable single-ended or differential | 16-bit SAR ADC |
| DAC | 12-bit | — |
| Tegangan Pemberi Arus | 1.71 V to 3.6 V | — |
| GPIO | [DATA_NEEDED: exact GPIO count per datasheet pinout table] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS | — |
| Display | Segment LCD driver | — |
| FPU / DSP | Single-precision IEEE-754 FPU + DSP extensions | — |
| MPU | Yes (Memory Protection Unit) | — |
| Status RoHS | Compliant | Compliant |
| Aras MSL | 3 (per JEDEC J-STD-020, reflow at 260C) | [DATA_NEEDED: MSL Level] |
| Core Architecture | — | ARM Cortex-M4F with FPU and DSP |
| Maximum CPU Frequency | — | 120 MHz |
| Flash Memory | — | 1 MB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Gambaran Suhu Operasi | — | -40C to +105C |
| Kiraan Pin | — | 100 |
| GPIO Count | — | Up to 80 |
| USB Controller | — | USB 2.0 OTG Full-Speed (Device/Host/OTG) |
| CAN | — | 2 x FlexCAN |
| Operating Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | < 340 nA |
| Wake-Up Time from Stop | — | 4.5 us |
| Low-Leakage Wake-Up Unit | — | Yes |