MK24FN1M0VDC12 vs MK24FN1M0VLL12 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MK24FN1M0VDC12 tarafından NXP Semiconductors ve MK24FN1M0VLL12 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12 ✓ Aktif
Özellik Karşılaştırması
| Parametre | MK24FN1M0VDC12 | MK24FN1M0VLL12 |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Core | ARM Cortex-M4F (32-bit) | — |
| Azami Saat Hızı | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 256 KB | 256 KB |
| Paket | 121-XFBGA (8x8 mm, 0.5 mm pitch) | 100-LQFP (LL) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı | -40C to +105C (industrial) | — |
| USB | Full-Speed USB 2.0 on-chip transceiver | — |
| ADC | 16-bit successive-approximation, configurable single-ended or differential | 16-bit SAR ADC |
| DAC | 12-bit | — |
| Besleme Gerilimi | 1.71 V to 3.6 V | — |
| GPIO | [DATA_NEEDED: exact GPIO count per datasheet pinout table] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS | — |
| Display | Segment LCD driver | — |
| FPU / DSP | Single-precision IEEE-754 FPU + DSP extensions | — |
| MPU | Yes (Memory Protection Unit) | — |
| RoHS Durumu | Compliant | Compliant |
| MSL Seviyesi | 3 (per JEDEC J-STD-020, reflow at 260C) | [DATA_NEEDED: MSL Level] |
| Core Architecture | — | ARM Cortex-M4F with FPU and DSP |
| Maximum CPU Frequency | — | 120 MHz |
| Flash Memory | — | 1 MB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| İşletim Sıcaklığı Aralığı | — | -40C to +105C |
| Pin Sayısı | — | 100 |
| GPIO Count | — | Up to 80 |
| USB Controller | — | USB 2.0 OTG Full-Speed (Device/Host/OTG) |
| CAN | — | 2 x FlexCAN |
| Operating Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | < 340 nA |
| Wake-Up Time from Stop | — | 4.5 us |
| Low-Leakage Wake-Up Unit | — | Yes |