MK24FN1M0VDC12 vs MK24FN1M0VLL12R Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MK24FN1M0VDC12 disebabkan oleh NXP Semiconductors dan MK24FN1M0VLL12R disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12 ✓ AktifNXP Semiconductors
MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP
MK24FN1M0VLL12R ✓ AktifPengandingan Spesifikasi
| Parametr | MK24FN1M0VDC12 | MK24FN1M0VLL12R |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | ARM Cortex-M4F (32-bit) | ARM Cortex-M4F with FPU, MPU, DSP extensions |
| Frekuensi Klock Maksimum | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 256 KB | 256 KB |
| Kemasan | 121-XFBGA (8x8 mm, 0.5 mm pitch) | 100-LQFP (14 x 14 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Suhu Operasi | -40C to +105C (industrial) | -40C to +105C |
| USB | Full-Speed USB 2.0 on-chip transceiver | USB 2.0 Full-Speed OTG with on-chip transceiver |
| ADC | 16-bit successive-approximation, configurable single-ended or differential | 16-bit SAR ADC |
| DAC | 12-bit | 12-bit DAC |
| Tegangan Pemberi Arus | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| GPIO | [DATA_NEEDED: exact GPIO count per datasheet pinout table] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS | — |
| Display | Segment LCD driver | — |
| FPU / DSP | Single-precision IEEE-754 FPU + DSP extensions | — |
| MPU | Yes (Memory Protection Unit) | — |
| Status RoHS | Compliant | — |
| Aras MSL | 3 (per JEDEC J-STD-020, reflow at 260C) | 3 (168 hours) |
| Maximum CPU Frequency | — | 120 MHz |
| Program Flash | — | 1 MB (1M x 8) |
| CAN | — | 2 x CAN 2.0B |
| SPI | — | 3 modules |
| I2C | — | 3 modules |
| UART | — | 4 modules |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | <340 nA (typical) |
| Wake-up Time | — | 4.5 us from Stop mode |