MK24FN1M0VDC12 vs MK24FN1M0VLL12R Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MK24FN1M0VDC12 sa pamamagitan ng NXP Semiconductors at MK24FN1M0VLL12R sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP
MK24FN1M0VDC12 ✓ NakahandaNXP Semiconductors
MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP
MK24FN1M0VLL12R ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MK24FN1M0VDC12 | MK24FN1M0VLL12R |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core | ARM Cortex-M4F (32-bit) | ARM Cortex-M4F with FPU, MPU, DSP extensions |
| Maksimum na Taktiko ng Oras | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 256 KB | 256 KB |
| Packhaging | 121-XFBGA (8x8 mm, 0.5 mm pitch) | 100-LQFP (14 x 14 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40C to +105C (industrial) | -40C to +105C |
| USB | Full-Speed USB 2.0 on-chip transceiver | USB 2.0 Full-Speed OTG with on-chip transceiver |
| ADC | 16-bit successive-approximation, configurable single-ended or differential | 16-bit SAR ADC |
| DAC | 12-bit | 12-bit DAC |
| Volte ng Pagbibigay | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| GPIO | [DATA_NEEDED: exact GPIO count per datasheet pinout table] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS | — |
| Display | Segment LCD driver | — |
| FPU / DSP | Single-precision IEEE-754 FPU + DSP extensions | — |
| MPU | Yes (Memory Protection Unit) | — |
| Tindminan RoHS | Compliant | — |
| Level ng MSL | 3 (per JEDEC J-STD-020, reflow at 260C) | 3 (168 hours) |
| Maximum CPU Frequency | — | 120 MHz |
| Program Flash | — | 1 MB (1M x 8) |
| CAN | — | 2 x CAN 2.0B |
| SPI | — | 3 modules |
| I2C | — | 3 modules |
| UART | — | 4 modules |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | <340 nA (typical) |
| Wake-up Time | — | 4.5 us from Stop mode |