SAF-XC886CM-8FFI5VAC vs ST10F276Z5T3 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SAF-XC886CM-8FFI5VAC disebabkan oleh Infineon dan ST10F276Z5T3 disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
SAF-XC886CM-8FFI5VAC - 8-bit MCU, 32KB Flash, CAN/LIN | Infineon
SAF-XC886CM-8FFI5VAC ✓ AktifSTMicroelectronics
ST10F276Z5T3 - 16-Bit 40MHz MCU 832KB Flash LQFP-144 | STMicroelectronics
ST10F276Z5T3 NrndPengandingan Spesifikasi
| Parametr | SAF-XC886CM-8FFI5VAC | ST10F276Z5T3 |
|---|---|---|
| Merek | Infineon | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | NRND |
| Core | XC800 (8-bit) | — |
| Family | XC88x | — |
| Flash Memory | 32 KB | — |
| RAM | 1.75 KB | Up to 68 KB |
| Kiraan Pin | 48 | 144 |
| Kemasan | TQFP-48 (7x7 mm) | LQFP-144 |
| Frekuensi Klock Maksimum | 24 MHz | — |
| Tegangan Pemberi Arus | 4.5 V to 5.5 V | — |
| Suhu Operasi | -40 C to +125 C | — |
| CAN Interface | CAN 2.0B active (on-chip controller) | On-chip CAN 2.0B (1 channel) |
| LIN Interface | Yes (LIN 1.3 / 2.0 slave/master) | — |
| ADC | 8-channel, 10-bit | — |
| PWM Unit | CCU6 (Capture/Compare Unit 6) | — |
| Watchdog | Window Watchdog + Brown-Out Detector | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Terminal Form | GULL WING | — |
| Temperature Grade | INDUSTRIAL | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| CPU Core | — | ST10 (16-bit CISC/RISC with DSP functions) |
| Maximum CPU Clock | — | 40 MHz |
| Instruction Cycle Time | — | 50 ns (at 40 MHz max) |
| Program Memory (Flash) | — | 832 KB (832K x 8) |
| MAC Unit | — | 16-bit x 16-bit multiplier, 40-bit accumulator |
| Operating Voltage | — | 5 V (with on-chip 3.3 V regulator) |
| Gambaran Suhu Operasi | — | [DATA_NEEDED: industrial/automotive temp grade] |
| Aras MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |
| Debug Interface | — | JTAG / OCDS |