SN65HVD52D vs SN65HVD78D Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SN65HVD52D disebabkan oleh Texas Instruments dan SN65HVD78D disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ AktifPengandingan Spesifikasi
| Parametr | SN65HVD52D | SN65HVD78D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | USB Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-485 / RS-422 full-duplex transceiver | 3.3 V half-duplex RS-485 transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Kadar Data | 1 Mbps | — |
| Tegangan Pemberi Arus | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Suhu Operasi | -40 C to +85 C | — |
| Kemasan | 8-pin SOIC (D) | 8-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | RS-485 |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Gambaran Suhu Operasi | — | -40°C to +125°C |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |