SN65HVD52D vs SN65HVD78D So sánh

So sánh chi tiết song song của SN65HVD52D bằng Texas Instruments và SN65HVD78D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD52D SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D ✓ Hoạt động
Texas Instruments
SN65HVD78D SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD52D SN65HVD78D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs USB Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485 / RS-422 full-duplex transceiver 3.3 V half-duplex RS-485 transceiver
Driver / Receiver Count 1 driver and 1 receiver —
Tốc độ dữ liệu 1 Mbps —
Điện áp cung cấp 5 V —
Maximum Supply Voltage 5.5 V —
Nhiệt độ hoạt động -40 C to +85 C —
Hộp 8-pin SOIC (D) 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Driver Configuration Full-duplex —
Bus Standard RS-485 and RS-422 RS-485
Unit Load 1/8 unit-load option —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 15 kV HBM —
Standby Current 1 uA —
Maximum Transmit Delay 230 ns —
Maximum Supply Current 8 mA —
Interface Standard EIA-485-A —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Supply Voltage Range — 3 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Maximum Signaling Rate — 50 Mbps
Driver Count — 1
Receiver Count — 1
Duplex Mode — Half-duplex
Khoảng nhiệt độ hoạt động — -40°C to +125°C
ESD Protection — Human Body Model and IEC Contact Discharge on bus pins
IEC Contact Discharge Protection — ±12 kV
Fault Protection Voltage — -13 V to +16.5 V

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá