Microchip Technology

A3P060-1TQ144 - 60K Gate ProASIC3 FPGA | Microchip Technology

MPN: A3P060-1TQ144 ✓ Aktif
1.5 V Vdss TQFP-144 Package 272 MHz Speed
MOQ: 1 |

A3P060-1TQ144 Ringkasan

The Microchip Technology A3P060-1TQ144 is a 1.5 V ProASIC3 field-programmable gate array with 60000 system gates, 1536 configurable logic blocks, and 91 user I/O in a 144-lead TQFP package. It combines reprogrammable logic with 18432 bits of SRAM for compact embedded control, industrial automation, communications, and signal-processing systems.

A ProASIC3 FPGA is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, embedded SRAM, and user I/O in one integrated device. Within the product hierarchy, it sits between a programmable logic device and a field-programmable gate array, offering substantially greater capacity than simple programmable logic while retaining nonvolatile configuration and a relatively low total cost of ownership.

The A3P060-1TQ144 provides 60000 system gates across 1536 logic blocks and supports a listed operating frequency of 272 MHz. Its 1.5 V core voltage reduces power requirements compared with older FPGA architectures, while the 144-pin TQFP package provides 91 user I/O according to the distributor product listing. The device is manufactured on 130 nm CMOS technology and uses a 0.5 mm pin pitch in a 20 mm by 20 mm package.

The programmable architecture supports parallel logic implementation, embedded memory, control functions, and external interface logic in one device. Configuration storage allows the same board design to be reprogrammed for firmware revisions, field updates, or design corrections without replacing the component. The combination of 1536 logic blocks, 18432 bits of SRAM, and 91 I/O makes the A3P060 suitable for control logic, protocol bridging, data acquisition, and low-to-medium complexity digital signal processing.

Typical uses include industrial factory automation, networked monitoring equipment, motor and motion control, embedded communications gateways, and compact control panels. The 144-lead TQFP package also suits prototype and production boards where a leaded package simplifies inspection, rework, and manual assembly compared with fine-pitch BGA or QFN options.

When laying out a PCB, treat all I/O and power pins according to the manufacturer pin-description table, and route configuration, clock, and serial programming signals away from high-speed outputs where possible. The 1.5 V core and I/O supply requirements are not interchangeable, so power planning must follow the exact voltage and decoupling recommendations in the ProASIC3 family documentation.

This page combines ProASIC3 family specifications with practical package-planning guidance, speed- and temperature-grade alternatives, and an engineering comparison of compatible 144-lead devices. It is intended to accelerate component selection, PCB footprint planning, and qualification for compact FPGA-based control systems.

Pilihan pengganti yang segera untuk A3P060-1TQ144 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera A3P060-1TQ144 (sama faktor bentuk dan kaki) — berbeza dalam System Gates.

Microchip Technology
System Gates: 60,000 gates
Bandingkan Dengan A3P060-1TQ144 →

A3P060-TQ144

✅ Masuk Drop-In
Microchip Technology
📦 TQFP-144
ProASIC3 · Flash-based · 60,000 gates · 91 pins · 18,432 bits · CMOS · 1.5 V · 0°C to 70°C (32°F to 158°F)

Hubungi untuk harga

Lihat Datasheet →

A3P060-TQG144

✅ Masuk Drop-In
📦 TQFP-144
Same A3P060 architecture and 144-lead TQFP footprint; suffix denotes a different ordering grade while logic capacity remains 60000 gates

📋 Alternatif rujukan (tidak dalam katalog)

A3P060-1TQG144

✅ Masuk Drop-In
📦 TQFP-144
Same A3P060 60K-gate device in a 144-lead TQFP footprint; TQG suffix identifies a different qualification grade

📋 Alternatif rujukan (tidak dalam katalog)

A3P060-1TQG144I

✅ Masuk Drop-In
📦 TQFP-144
Same logic density, I/O allocation, and TQFP-144 land pattern; industrial-grade suffix changes temperature and qualification requirements

📋 Alternatif rujukan (tidak dalam katalog)

A3P060-1TQ144Y

✅ Masuk Drop-In
📦 TQFP-144
Same A3P060 60000-gate device and 144-lead TQFP format; trailing Y denotes a distinct ordering qualification rather than a different package

📋 Alternatif rujukan (tidak dalam katalog)

A3P060-1TQ144 Penilaian maksimum & Ciri-ciri Elektrik

Device Type ProASIC3 field-programmable gate array (FPGA)
System Gates 60000 gates
Configurable Logic Blocks 1536 CLBs
Embedded SRAM 18432 bits
User I/O 91 I/O
Maximum Frequency 272 MHz
Core Supply Voltage 1.5 V
Process Technology 130 nm CMOS
Package Type TQFP-144
Kiraan Pin 144 pins
Package Dimensions 20 mm x 20 mm
Package Height 1.40 mm
Pin Pitch 0.50 mm
Programming Nonvolatile FPGA configuration
Logic Family CMOS
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin A3P060-1TQ144 1.40 mm

Konfigurasi pin untuk A3P060-1TQ144 (1.40 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 1.40 mm untuk A3P060-1TQ144

Tiada data garisan pin yang diperoleh untuk A3P060-1TQ144.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

A3P060-1TQ144 patut untuk 6 aplikasis: Industrial Factory Automation Controllers, Motor Drive and Motion Control Logic, Data Acquisition and Signal Conditioning, Embedded Communications Gateways, Smart Sensor and Monitoring Nodes, Programmable Logic and Test Equipment.

🏭

Industrial Factory Automation Controllers

The A3P060-1TQ144 fits machine-control and factory-automation logic that requires 1536 configurable logic blocks, 91 user I/O, and moderate embedded data storage in one programmable device. Its 60000 system gates can host sequencers, interlock logic, status machines, and communication interfaces without relying on a separate microcontroller for every task. The 1.5 V core reduces supply requirements, while the 144-lead TQFP provides a generous I/O count for limit switches, encoders, solenoid drivers, and operator interfaces. For equipment operating across an extended industrial temperature range, specify the industrial-grade A3P060-1TQG144I ordering option and verify its timing and qualification data.

⚡

Motor Drive and Motion Control Logic

The A3P060-1TQ144 is suitable for the digital control layer of a motor-drive or motion-control system because 1536 logic blocks can implement pulse-width modulation, direction sequencing, fault capture, and position-decoding functions. Its 91 user I/O allow encoder channels, Hall-effect sensors, brake controls, and status signals to be consolidated in one package, while 18432 bits of embedded SRAM can buffer motion commands and diagnostic history. The 272 MHz listed operating frequency supports high-speed control logic, although motor timing must still be checked against the family datasheet. Use the manufacturer pin-description table for every I/O assignment and isolate switching-node signals from sensitive control inputs.

📺

Data Acquisition and Signal Conditioning

The A3P060-1TQ144 can implement digital filtering, decimation, trigger control, and data packing for compact acquisition systems. The device provides 60000 system gates and 18432 bits of SRAM, which support parallel filtering pipelines and short capture buffers while leaving external memory available for larger records. With 91 user I/O, the FPGA can connect directly to multiple converter outputs, latch control signals, and communication transceivers without a separate glue-logic device. The 1.5 V core and 130 nm CMOS process fit low-power embedded instrumentation, but analog input bandwidth, output timing, and I/O voltage standards must be validated against the specific system architecture.

🌐

Embedded Communications Gateways

The A3P060-1TQ144 is appropriate for protocol conversion, framing, buffering, and supervisory logic in embedded communications equipment. Its 60000-gate ProASIC3 architecture can run parallel state machines for serial links, Ethernet or fieldbus framing, and host-interface translation, while the 18432 bits of SRAM provide packet buffering and command queues. The 91-I/O count simplifies simultaneous use of multiple serial ports, indicator outputs, and configuration signals. A 144-lead TQFP also supports prototype boards and maintenance-friendly assemblies where fine-pitch BGA inspection would be difficult. Verify supported I/O standards, clocking requirements, and configuration interface signals in the family documentation.

🧩

Smart Sensor and Monitoring Nodes

The A3P060-1TQ144 suits compact monitoring nodes that must acquire several sensor outputs, apply local filtering, and forward results over a serial link. The 91 user I/O provide capacity for digital sensors, threshold inputs, alarm outputs, and status indicators, while the embedded SRAM can hold recent samples or a rolling diagnostic buffer. Its reprogrammability allows sensor thresholds, scaling coefficients, and communication mappings to be revised without changing the PCB. The device is particularly useful where a fixed-function microcontroller would require additional external logic for acquisition, timing, or protocol handling. Confirm the operating-temperature grade and the exact I/O voltage requirements for each connected sensor.

🔧

Programmable Logic and Test Equipment

The A3P060-1TQ144 can implement custom test sequences, stimulus generation, timing checks, and result logging in programmable test and measurement equipment. Its 1536 logic blocks are well suited to parallel pattern generation, while 91 I/O provide multiple channels for device-under-test control and response capture. The 18432 bits of embedded SRAM can hold test vectors or measurement records, and the 272 MHz listed operating frequency supports moderately fast digital test rates. The 144-lead TQFP package is convenient for laboratory prototypes and small production runs. Validate input thresholds, output drive, and timing margins against the test fixture and the manufacturer electrical characteristics.

Ringkasan Produk Disebarkan

A3P060-1TQG144I Industrial-grade A3P060 option in the same 144-lead package family Dipergunakan di: Industrial Factory Automation Controllers AT90CAN32-16AUR Microchip Technology Dipergunakan di: Industrial Factory Automation Controllers MC9S08SH16CWL NXP Semiconductors Dipergunakan di: Industrial Factory Automation Controllers A3P060-1TQ144Y Same-family speed and qualification alternative for migration review Dipergunakan di: Motor Drive and Motion Control Logic THS1230CDW Texas Instruments Dipergunakan di: Motor Drive and Motion Control Logic THS1215IPW Texas Instruments Dipergunakan di: Motor Drive and Motion Control Logic, Programmable Logic and Test Equipment THS1041IDW Texas Instruments Dipergunakan di: Data Acquisition and Signal Conditioning THS1031IDW Texas Instruments Dipergunakan di: Data Acquisition and Signal Conditioning THS1040CDW Texas Instruments Dipergunakan di: Data Acquisition and Signal Conditioning LAN7500I-ABZJ-TR Microchip Technology Dipergunakan di: Embedded Communications Gateways LAN9730-ABZJ-TR Microchip Technology Dipergunakan di: Embedded Communications Gateways LAN9313I-NZW-TR Microchip Technology Dipergunakan di: Embedded Communications Gateways INA240A1PW Texas Instruments Dipergunakan di: Smart Sensor and Monitoring Nodes INA149AIDR Texas Instruments Dipergunakan di: Smart Sensor and Monitoring Nodes SP3232EHEY-L MaxLinear Dipergunakan di: Smart Sensor and Monitoring Nodes TAS5558DCAR Texas Instruments Dipergunakan di: Programmable Logic and Test Equipment TAS5508PAGR Texas Instruments Dipergunakan di: Programmable Logic and Test Equipment
What are the key specifications of A3P060-1TQ144 that engineers should know?
The A3P060-1TQ144 is a 1.5 V ProASIC3 FPGA with 60000 system gates, 1536 configurable logic blocks, 18432 bits of SRAM, 91 user I/O, and a 272 MHz listed operating frequency. It uses 130 nm CMOS technology and is packaged in a 144-lead TQFP with a 0.50 mm pitch. According to the Microchip A3P060 product page, ProASIC3 devices combine reprogrammable logic, embedded SRAM, user I/O, and low total cost of ownership in a small-footprint package.
Where can I download the A3P060-1TQ144 datasheet PDF?
The official A3P060 family documentation is available from the Microchip A3P060 product page at https://www.microchip.com/en-us/product/A3P060. Use that document for the authoritative pin-description table, configuration memory map, recommended power supplies, and AC timing characteristics. The A3P060-1TQ144 is the 272 MHz, 144-lead TQFP configuration of the ProASIC3 family, and its ordering code appears in the family datasheet and package-addendum documentation.
Where can I find the A3P060-1TQ144 pinout and package dimensions?
Use the pin-description table and package drawings in the Microchip ProASIC3 family datasheet for the authoritative A3P060-1TQ144 pinout. The component is a 144-lead TQFP measuring 20 mm by 20 mm, with a 1.40 mm maximum body height and a 0.50 mm pin pitch. Do not infer pin assignments from another A3P060 package because the 100-lead and 144-lead devices expose different I/O arrangements.
What can replace the A3P060-1TQ144 without changing the PCB footprint?
A3P060-1TQG144I is a same-footprint 144-lead replacement candidate because it retains the A3P060 architecture and TQFP-144 land pattern while specifying an industrial grade. Compatibility must still be confirmed for speed grade, temperature rating, configuration interface, and supply voltage. The A3P060-VQG100 and A3P060-FGG144 families use different packages and are not drop-in replacements for a 144-lead TQFP board.
Is A3P060-1TQ144 pin compatible with A3P060-1TQG144I?
The A3P060-1TQG144I is a pin-compatible migration candidate because both devices belong to the A3P060 ProASIC3 family and use the 144-lead TQFP package. Its grade designation indicates an industrial-qualified ordering option rather than a different logic architecture. Before substitution, verify the exact speed grade, temperature range, I/O voltage configuration, and system timing budget against the manufacturer datasheet.
What is the best Microchip equivalent for A3P060-1TQ144?
The closest same-family option identified for a 144-lead TQFP footprint is the A3P060-1TQG144I. It preserves the A3P060 device density, logic-block count, SRAM allocation, and package form factor while changing the ordering suffix. Because the suffix can encode speed, temperature, or qualification information, confirm the full ordering-code comparison before treating it as a drop-in replacement.
A3P060-1TQ144 vs A3P060-1TQG144I - which is better for an industrial control board?
Choose A3P060-1TQG144I when the board requires the industrial grade indicated by its TQG144I ordering code. The A3P060-1TQ144 remains the standard 1.5 V, 272 MHz, 144-lead TQFP configuration for designs not requiring that grade. Both share the same ProASIC3 A3P060 architecture and TQFP-144 footprint, so the decision turns on qualification, temperature range, lifecycle, and timing rather than a PCB redesign.
What is the difference between A3P060-TQ144 and A3P060-1TQ144?
Both are A3P060 ProASIC3 devices in the 144-lead TQFP package, and the distributor listings identify the family as a 60K-gate, 91-I/O device. The ordering-code prefix distinguishes the speed-grade selection, with A3P060-1TQ144 listed at 272 MHz. Because timing, temperature, and qualification suffixes can differ, use the family ordering guide to confirm the exact grade rather than selecting by the numeric prefix alone.
When should I choose A3P060-1TQ144 instead of a smaller ProASIC3 device?
Choose A3P060-1TQ144 when a design needs more than 60000 system gates, 1536 configurable logic blocks, or 91 user I/O in a 144-lead package. Its 18432 bits of embedded SRAM reduce the need for external memory in moderate data-processing and control applications. Select a smaller device only when the logic, I/O, and memory requirements are fully mapped and the board is not expected to grow.
Is A3P060-1TQ144 suitable for industrial automation and factory control?
The A3P060-1TQ144 is suitable for compact industrial control logic when its specified operating temperature and reliability grade meet the equipment requirement. It provides 1536 logic blocks, 91 I/O, and embedded SRAM for sequencing, communications, and signal conditioning in a single nonvolatile programmable device. For equipment exposed to extended temperature ranges, select the specifically industrial-qualified A3P060-1TQG144I ordering option.
Where can I buy A3P060-1TQ144 online and what is its current lead time?
Use the Request a Quote form on this page to request current A3P060-1TQ144 pricing, stock confirmation, minimum order quantity, and lead time for your required quantity and shipment destination. Current commercial availability can change by package suffix, volume, and region, so obtain a written quotation before scheduling production. The Request a Quote response is the appropriate source for a build slot against the selected A3P060-1TQ144 ordering code.
Is A3P060-1TQ144 in stock?
Request an A3P060-1TQ144 stock and lead-time confirmation through the Request a Quote form on this page. Because inventory for legacy programmable-logic devices can move in small allocations, provide your annual usage, prototype quantity, and production forecast with the request. Do not treat a catalog page as a live inventory guarantee until the supplier confirms the exact MPN and package suffix.
How much does A3P060-1TQ144 cost?
Request a current quotation for A3P060-1TQ144 using the Request a Quote form on this page. The quotation should state the unit price, quantity breaks, currency, shipping terms, and expected lead time for the quantity you need. Pricing for programmable-logic devices can depend on order volume, programming support, and package allocation, so a binding quotation is more useful than a generic catalog reference.
What is the lead time for A3P060-1TQ144?
The current lead time for A3P060-1TQ144 should be confirmed through the Request a Quote form on this page. Include the prototype quantity, planned annual consumption, and required delivery date so the supplier can identify the relevant production or allocation lot. A programmed-device program may also add handling time, and the programming arrangement can affect the total delivery schedule.
Does A3P060-1TQ144 need external memory for a control application?
The A3P060-1TQ144 includes 18432 bits of embedded SRAM, which is sufficient for many moderate control, buffering, and status-handling tasks without external memory. Larger data buffers, wide capture arrays, or multi-megabit storage will require external SRAM or flash. Partition the embedded RAM carefully and check the ProASIC3 memory architecture before assigning the FPGA to high-bandwidth data processing.
Why does the A3P060-1TQ144 use a 1.5 V core supply?
The 1.5 V core supply reflects the ProASIC3 generation's 130 nm CMOS implementation and supports lower core power than earlier FPGA families. The board must still provide the separate I/O and configuration voltages specified for the selected package and I/O standard. Treat the core rail, I/O rails, and auxiliary supplies as independent design constraints rather than assuming every pin can operate from 1.5 V.
Can A3P060-1TQ144 be used for motor control or signal acquisition?
The A3P060-1TQ144 can implement motor-control sequencing, interface conversion, and moderate signal-acquisition logic because it combines 1536 logic blocks with 91 user I/O. Its practical suitability depends on the required I/O voltage, timing, isolation strategy, and analog front end; the FPGA does not replace input protection or analog conditioning. Validate the timing budget and pin assignments in the family pin-description table.
Is the A3P060-1TQ144 RoHS compliant and AEC-Q100 qualified?
RoHS and AEC-Q100 status must be confirmed for the exact A3P060-1TQ144 ordering code in the Microchip product documentation and material-declaration records. The industrial suffix on A3P060-1TQG144I indicates a different qualification ordering path, but it should not be used as proof that the standard A3P060-1TQ144 carries automotive qualification. Request the compliance documents for the exact part before release to production.

Data referensi kejuruteraan untuk A3P060-1TQ144 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Select A3P060-1TQ144 for a compact control, acquisition, or communications design that needs 60000 system gates, 91 user I/O, and 18432 bits of embedded SRAM in a 144-lead TQFP. Its 1.5 V core and 272 MHz listed operating frequency suit low-power embedded logic, while the leaded package simplifies prototype inspection and rework. Choose A3P060-1TQG144I when the equipment requires the industrial ordering grade, after confirming timing, temperature, and qualification data. Use A3P060-TQ144 or A3P060-TQG144 when a different speed or qualification selection matches the system requirement. Do not use A3P060-VQG100 or A3P060-FGG144 for a drop-in substitution because their packages and pinouts require a PCB redesign. For any 144-lead migration, verify the complete ordering-code comparison, configuration method, supply rails, and timing constraints.

Perbandingan dengan Gantian

Parametr Produk Ini A3P060-TQ144 A3P060-TQG144 A3P060-1TQG144 A3P060-1TQG144I A3P060-1TQ144Y
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package TQFP-144 TQFP-144 - same footprint TQFP-144 - same footprint TQFP-144 - same footprint TQFP-144 - same footprint TQFP-144 - same footprint
FPGA Family ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3
System Gates 60000 gates 60000 gates 60000 gates 60000 gates 60000 gates 60000 gates
Configurable Logic Blocks 1536 CLBs 1536 CLBs 1536 CLBs 1536 CLBs 1536 CLBs 1536 CLBs
User I/O 91 I/O 91 I/O 91 I/O 91 I/O 91 I/O 91 I/O
Core Voltage 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V
Process Technology 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS
Ordering Grade 1TQ144 - speed-grade 1 ordering code Standard TQ144 ordering grade TQG144 ordering grade Speed-grade 1 TQG144 ordering grade Speed-grade 1 industrial TQG144I ordering grade Speed-grade 1 TQ144Y ordering grade

Penyeberangsung Jelas

  • Provides a 91-I/O 144-lead option within the compact ProASIC3 family (vsA3P060-VQG100)
  • Uses a leaded 0.50 mm-pitch TQFP for inspection and prototype assembly (vsA3P060-FGG144T)
  • Combines 60000 gates, 1536 CLBs, and 18432 bits of SRAM in one device (vsA3P060-1TQG144I)

Catatan Desain

Treat the 1.5 V core rail separately from the device I/O supplies and configuration supply. Follow the ProASIC3 family recommended-decoupling network, including the specified bulk and high-frequency capacitors placed close to their corresponding pins. Check the load current for every external I/O rather than assuming the 91 available I/O can drive maximum current simultaneously. Sequencing must follow the family power-up requirements so configuration inputs remain in a defined state during ramp-up.

Use the 144-lead TQFP package drawing for land-pattern generation: a 20 mm by 20 mm body, 0.50 mm pitch, and 1.40 mm listed height. Keep configuration and serial-programming traces away from high-speed outputs and switching-node inputs. Route sensitive clock and differential-interface signals over a continuous ground plane, and avoid placing noisy power-converter routing directly beneath the FPGA. Thermal performance in the leaded package is predictable but still depends on copper area and airflow.

Assign pins from the manufacturer pin-description table rather than from an older A3P060 board or another package. A3P060-VQG100 and A3P060-FGG144 alternatives have different footprints and cannot share this PCB without redesign. Preserve configuration access and design a test path for JTAG or the selected programming interface so a board can be diagnosed after assembly.

Do not substitute the A3P060-VQG100 or A3P060-FGG144 families as drop-in parts because their package dimensions and pin arrangements differ. When changing among 144-lead order codes, compare speed grade, temperature grade, qualification, supply voltage, and I/O standard in the Microchip ordering documentation. The trailing Y and I suffixes are meaningful ordering information, not cosmetic production codes.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status must be confirmed for the exact A3P060-1TQ144 ordering code. Automotive qualification is not established for this standard ordering code; the A3P060-1TQG144I industrial ordering option is a separate grade.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

a3p060 vqg100 a3p060 tqg144i a3p060 fgg144i a3p060 vqg100 datasheet a3p060 datasheet actel a3p060 proasic3 a3p060 A3P060-1TQ144 datasheet A3P060-1TQ144 pinout A3P060-1TQ144 specifications A3P060-1TQ144 equivalent A3P060-1TQ144 replacement A3P060-1TQ144 price A3P060-1TQ144 stock A3P060-1TQ144 TQFP-144 footprint

Komponen dan Tanda berkaitan

Microchip Technology Microsemi Actel A3P060-1TQ144 A3P060-TQ144 A3P060-TQG144 A3P060-1TQG144 A3P060-1TQG144I A3P060-1TQ144Y ProASIC3 field-programmable gate array FPGA programmable logic device configurable logic block embedded SRAM TQFP-144 surface mount 1.5 V core 130 nm CMOS industrial automation motor control data acquisition embedded communications RoHS AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ