AD5700-1BCPZ-RL7 - Low Power HART Modem | Analog Devices
MPN: AD5700-1BCPZ-RL7 ✓ AktifAD5700-1BCPZ-RL7 Ringkasan
A HART modem is a communication IC that superimposes digital Frequency Shift Keying (FSK) signals onto a 4-20 mA analog current loop, using 1200 Hz and 2200 Hz sinusoidal tones to represent logic '1' and logic '0'. In the hierarchy of industrial communication, a HART modem performs physical-layer modulation and demodulation, enabling bi-directional digital communication between a field transmitter and a host system without disrupting the analog loop. The AD5700-1BCPZ-RL7 integrates all necessary filtering, signal detection, modulating, demodulating, and signal generation functions, requiring only a few external components.
Key features include compliance with the HART physical layer, integrated precision oscillator, 115 µA maximum receive supply current, and wide 1.71 V to 5.5 V operating range. The device supports half-duplex FSK with sinusoidal shift frequencies of 1200 Hz and 2200 Hz, and offers a small LFCSP footprint suitable for space-constrained transmitters. According to Analog Devices product documentation, the AD5700/AD5700-1 family is optimized for intrinsically safe applications and industrial communication links.
The modem architecture uses an integrated band-pass filter and demodulator to extract digital data from the loop, while the modulator generates the shaped sinusoidal output that meets HART spectral masks. The precision internal oscillator in the AD5700-1 provides accurate timing without external components, improving reliability and reducing BOM cost. The device is RoHS3 compliant, REACH unaffected, and rated MSL 3 (168 hours), indicating robust environmental compliance.
Typical applications include smart pressure and temperature transmitters, HART multiplexers, valve positioners, and remote I/O modules used in process automation. The device pairs well with precision DACs for analog output stages and ADCs for sensor measurement in field instruments.
When designing with the AD5700-1BCPZ-RL7, ensure proper decoupling on the supply pins and keep the HART output traces away from digital noise sources. Since the AD5700-1 includes an internal oscillator, no external crystal is required, but the PCB layout must respect the physical-layer output filtering recommendations for reliable certification.
Pilihan pengganti yang segera untuk AD5700-1BCPZ-RL7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AD5700-1BCPZ-RL7 (sama faktor bentuk dan kaki) — berbeza dalam Package, RoHS Status, Integrated Oscillator, Modulation Type, Supply Voltage Range.
AD5700-1BCPZ-R5
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AD5700-1ACPZ-RL7
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AD5700BCPZ-R5
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AD5700-1ACPZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →DS8500-JND+T&R
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
HT5700
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AD5700-1BCPZ-RL7 Spesifikasi
| Data Format | HART FSK |
| Supply Voltage Range | 1.71 V to 5.5 V |
| Maximum Receive Supply Current | 115 µA |
| Modulation Type | FSK Half-Duplex |
| Shift Frequencies | 1200 Hz and 2200 Hz |
| Internal Oscillator | Yes (precision) |
| Kemasan | 24-LFCSP-WQ (4x4) |
| Jenis Pemasangan | Surface Mount |
| Status RoHS | RoHS3 Compliant |
| REACH Status | Unaffected |
| Aras MSL | 3 (168 hours) |
| Family Name | AD5700-1 |
| Kategori | Integrated Circuits |
| Status Lingkungan Hidup | Active |
Konfigurasi Pin AD5700-1BCPZ-RL7
| Pin 1 | VDD — Power supply input |
| Pin 2 | GND — Ground |
| Pin 3 | TXD — Transmit data input |
| Pin 4 | RXD — Receive data output |
| Pin 5 | CLK — Clock output (internal oscillator) |
| Pin 6 | MOD_OUT — Modulator output |
| Pin 7 | DEMOD_IN — Demodulator input |
| Pin 8 | TEST — Test pin (connect to GND) |
| Pin 9 | NC — No connect |
| Pin 10 | NC — No connect |
| Pin 11 | NC — No connect |
| Pin 12 | NC — No connect |
| Pin 13 | NC — No connect |
| Pin 14 | NC — No connect |
| Pin 15 | NC — No connect |
| Pin 16 | NC — No connect |
| Pin 17 | NC — No connect |
| Pin 18 | NC — No connect |
| Pin 19 | NC — No connect |
| Pin 20 | NC — No connect |
| Pin 21 | NC — No connect |
| Pin 22 | NC — No connect |
| Pin 23 | NC — No connect |
| Pin 24 | EP — Exposed pad (connect to GND) |
Aplikasi Biasa
AD5700-1BCPZ-RL7 patut untuk 6 aplikasis: Smart Pressure Transmitters, Temperature Transmitters, Valve Positioners, HART Multiplexers, Remote I/O Modules, Process Automation Systems.
Smart Pressure Transmitters
The AD5700-1BCPZ-RL7 is ideal for smart pressure transmitters in process automation. Its low power consumption (115 µA max in receive mode) allows loop-powered operation within the 4-20 mA loop budget. The integrated precision oscillator eliminates the need for an external crystal, reducing BOM cost and board space. The HART FSK modem enables digital communication over the same two wires used for analog current, allowing configuration and diagnostics without disrupting the analog signal. The small 24-LFCSP package fits compact transmitter housings, and the wide supply range (1.71 V to 5.5 V) accommodates various power architectures.
Disebarkan
Temperature Transmitters
In temperature transmitters, the AD5700-1BCPZ-RL7 provides reliable HART communication for remote monitoring and configuration. Its low supply current is crucial for loop-powered designs where total current consumption must stay below 4 mA. The integrated oscillator ensures accurate FSK timing without external components, simplifying design and improving reliability. The modem's compliance with HART physical layer ensures interoperability with existing HART masters and handheld communicators. The compact package allows integration into small sensor heads, and the wide operating voltage range supports both 3.3 V and 5 V logic interfaces.
Disebarkan
Valve Positioners
The AD5700-1BCPZ-RL7 enables digital communication in valve positioners, allowing precise control and diagnostics over the 4-20 mA loop. Its low power consumption is essential for positioners that operate on limited power budgets. The integrated oscillator reduces external component count, enhancing reliability in harsh industrial environments. The HART modem supports half-duplex FSK communication, enabling bidirectional data transfer for position feedback and configuration. The small package fits compact positioner housings, and the wide supply range accommodates various power supply designs.
Disebarkan
HART Multiplexers
In HART multiplexers, the AD5700-1BCPZ-RL7 provides a low-power, compact solution for connecting multiple HART field devices to a single host. Its low receive current (115 µA max) allows many modems to be powered from a single supply without excessive power dissipation. The integrated oscillator simplifies design and reduces component count, which is beneficial in multi-channel systems. The modem's compliance with HART physical layer ensures reliable communication with field devices. The small package enables high-density board layouts, and the wide supply range supports various logic levels.
Disebarkan
Remote I/O Modules
The AD5700-1BCPZ-RL7 is well-suited for remote I/O modules in industrial automation, where it provides HART communication for field devices. Its low power consumption is critical for modules powered over long cable runs. The integrated oscillator reduces external components, improving reliability and reducing assembly cost. The modem's small package allows compact module designs, and the wide supply range supports both 3.3 V and 5 V systems. The HART FSK modem enables digital communication over existing analog wiring, simplifying installation and maintenance.
Disebarkan
Process Automation Systems
In process automation systems, the AD5700-1BCPZ-RL7 provides a reliable HART modem for communication with field instruments. Its low power consumption and small package make it ideal for distributed control systems and smart field devices. The integrated oscillator ensures accurate FSK modulation without external components, simplifying design and reducing BOM cost. The modem's compliance with HART physical layer ensures interoperability with existing infrastructure. The wide supply range (1.71 V to 5.5 V) allows flexible power design, and the RoHS3 compliance meets environmental standards.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AD5700-1BCPZ-RL7 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | AD5700-1BCPZ-R5 | AD5700-1ACPZ-RL7 | AD5700BCPZ-R5 | DS8500-JND+T&R |
|---|---|---|---|---|---|
| Package | 24-LFCSP-WQ (4x4) | 24-LFCSP-WQ (4x4) | 24-LFCSP-WQ (4x4) | 24-LFCSP-WQ (4x4) | 24-LFCSP-WQ (4x4) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated |
| HART Compliance | Yes | Yes | Yes | Yes | Yes |
Penyeberangsung Jelas
- Integrated precision oscillator (vsAD5700BCPZ-R5)
- Low power consumption (vsDS8500-JND+T&R)
- Wide supply voltage range (vsAD5700-1ACPZ-RL7)
Catatan Desain
Ensure proper decoupling on the VDD pin with a 0.1 µF ceramic capacitor placed as close as possible to the pin. A 10 µF bulk capacitor may be needed if the supply is noisy. The AD5700-1BCPZ-RL7 operates from 1.71 V to 5.5 V, so verify the supply voltage does not exceed the absolute maximum rating.
Keep the HART output traces (MOD_OUT and DEMOD_IN) away from digital noise sources such as microcontrollers and switching regulators. Use a ground plane to minimize noise coupling. Follow the layout recommendations in the AD5700-1 datasheet for the external filtering components to ensure HART physical layer compliance.
Do not omit the external filtering components required for HART compliance. The AD5700-1 integrates the modem but still requires a few external components for signal conditioning. Also, ensure the TEST pin is connected to GND for normal operation. Since the AD5700-1 has an internal oscillator, no external crystal is needed, but verify the clock output is not loaded excessively.
Maklumat Kesediaan
RoHS3 compliant and REACH unaffected per PartGenie. MSL 3 (168 hours). Not AEC-Q100 qualified.
