Analog Devices

AD602JN - Dual Low-Noise VGA, 35 MHz | Analog Devices

MPN: AD602JN ✓ Aktif
±5.25 V Vdss 16-lead PDIP Package
MOQ: 1 |

AD602JN Ringkasan

The Analog Devices AD602JN is a dual-channel, low-noise, wideband variable-gain amplifier optimized for ultrasound imaging and other precision signal-chain applications. Each independent channel provides a gain range of -10 dB to +30 dB, accurate absolute gain to 0.3 dB, and input noise density of 1.4 nV/√Hz. The device is packaged in a 16-lead PDIP and operates from dual ±5.25 V supplies.

A variable-gain amplifier, or VGA, is an analog amplifier whose gain can be adjusted by an external control voltage. In the broader hierarchy, a VGA belongs to the amplifier IC and signal-conditioning categories, where it sits between a low-noise input stage and a downstream converter, detector, or display circuit. Unlike a fixed-gain amplifier, a VGA supports calibrated gain adjustment, ranging control, and gain normalization in systems whose input amplitude changes over time.

The AD602JN uses a linear-in-decibel gain response, making its control relationship easier to calibrate than a linear-in-voltage control law. Its two gain ranges, each covering 30 dB, support precise signal adjustment while the 0.3 dB absolute-gain accuracy provides predictable system-level amplitude calibration. The 1.4 nV/√Hz input-noise specification supports low-noise amplification, and the -60 dBc total harmonic distortion at a 1 V output places the device in the low-distortion signal-chain class.

Bandwidth extends to 35 MHz at the -3 dB point, allowing the AD602JN to process substantially higher frequencies than audio-only amplifiers. This bandwidth is important in ultrasound systems because received echoes can contain frequency components above the baseband range. The dual-channel architecture supports coherent processing of two signal streams without requiring two separate amplifiers, while independent gain controls allow each channel to be adjusted separately.

Typical uses include ultrasound receiver channels, medical imaging front ends, broadband test equipment, communications receivers, and other systems requiring accurate variable gain with low added noise. In an ultrasound receiver, the AD602JN can amplify a weak transducer signal while a control voltage establishes the gain required for a consistent downstream signal level. The same architecture can normalize sensor outputs before digitization or detection.

A primary design consideration is maintaining clean, decoupled power rails and keeping the gain-control path free from high-frequency interference. The gain-control voltage and surrounding circuitry must also preserve the intended linear-in-decibel behavior across the selected range. Because the 35 MHz bandwidth and 1 V output test condition characterize performance differently at different frequencies and amplitudes, system designers should evaluate noise, distortion, stability, and control bandwidth together rather than relying on a single headline specification.

This product summary combines the AD602 architecture, commercial-temperature grade, dual-channel gain capability, low-noise performance, and packaging details with practical guidance for selecting, comparing, and implementing the AD602JN in precision analog signal chains.

Pilihan pengganti yang segera untuk AD602JN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

AD600JN

✅ Masuk Drop-In
Analog Devices
📦 16-lead PDIP
Dual variable gain amplifier · 2 channels · 35 MHz · ±5.25 V · 0°C to +70°C · 16-lead PDIP · Through-hole · Single-ended

Hubungi untuk harga

Lihat Datasheet →

AD602JN Penilaian maksimum & Ciri-ciri Elektrik

Number of Channels 2 channels
Amplifier Type Dual, low-noise, wideband variable-gain amplifier
Gain Range per Channel -10 dB to +30 dB
Number of Gain Ranges 2 gain ranges
Gain Range per Segment 30 dB
Gain Control Response Linear in dB
Absolute Gain Accuracy 0.3 dB
Input Noise Density 1.4 nV/√Hz
Total Harmonic Distortion -60 dBc at 1 V output
-3 dB Bandwidth Up to 35 MHz
Tegangan Pemberi Arus ±5.25 V
Suhu Operasi 0 °C to +70 °C
Temperature Grade Commercial
Kemasan 16-lead PDIP
Package Type PDIP
Bilangan Pin 16 pins
Jenis Pemasangan Through-hole

Panduan Konfigurasi Pin AD602JN pdip

Konfigurasi pin untuk AD602JN (pdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai pdip untuk AD602JN

Tiada data garisan pin yang diperoleh untuk AD602JN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD602JN patut untuk 6 aplikasis: Ultrasound Receiver Signal Chain, Medical Imaging Front End, Broadband Signal Conditioning, Communications Receiver Front End, Test and Measurement Instrumentation, Industrial Sensor Interface.

💊

Ultrasound Receiver Signal Chain

The AD602JN fits the variable-gain stage of an ultrasound receiver because each channel delivers independent -10 dB to +30 dB gain with 0.3 dB absolute-gain accuracy. Its 1.4 nV/√Hz input noise helps preserve weak echo information, while bandwidth to 35 MHz supports a broader received-frequency spectrum than an audio-band amplifier. Two channels can process related receive signals independently, reducing circuit count where coherent or parallel channels are required. The gain-control network should implement the intended linear-in-decibel scaling and be isolated from switching-node and clock-related noise.

💊

Medical Imaging Front End

The AD602JN can normalize analog signals before digitization in medical imaging equipment that requires consistent amplitude across changing sensor conditions. Its two independent channels support paired signal paths, while the -10 dB to +30 dB range permits attenuation as well as amplification. The 0.3 dB absolute-gain accuracy supports predictable calibration, and the -60 dBc distortion specification at 1 V output helps preserve low-level signal integrity. Layout should isolate gain-control routing and provide low-impedance decoupling for both ±5.25 V rails.

📡

Broadband Signal Conditioning

The AD602JN is suitable for broadband signal conditioning when a subsystem must adjust amplitude without moving into a lower-frequency audio path. Its -3 dB bandwidth reaches 35 MHz, and the 1.4 nV/√Hz input noise density supports low-noise operation across that range. The linear-in-decibel gain response simplifies calibration when control values are mapped to dB rather than voltage. For wideband use, pay particular attention to gain-control bandwidth, output swing, component parasitics, and stable grounding around the 16-lead PDIP footprint.

🌐

Communications Receiver Front End

The AD602JN can provide adjustable gain in a communications receiver when incoming signal level varies substantially across operating conditions. Independent control of two channels supports receiver architectures that compare, balance, or process paired signals, while the -10 dB to +30 dB range gives the system authority to attenuate strong inputs and amplify weaker ones. Bandwidth up to 35 MHz covers many intermediate-frequency and wider-bandwidth signal paths. Choose the bias point carefully to retain distortion and bandwidth, and decouple the dual ±5.25 V supplies close to the device pins.

🖥️

Test and Measurement Instrumentation

The AD602JN suits instrumentation requiring calibrated gain adjustment over a wide signal bandwidth. The 0.3 dB absolute-gain accuracy supports repeatable level setup, while two independently controlled channels can simplify source comparison or dual-path measurement systems. Its 35 MHz -3 dB bandwidth enables use beyond audio frequencies, and the 1.4 nV/√Hz noise density is valuable when the input source has low amplitude. Designers should account for control-voltage accuracy, output clipping, load impedance, and the frequency dependence of gain and distortion when establishing measurement limits.

🏭

Industrial Sensor Interface

The AD602JN can condition signals from industrial sensors whose output amplitude changes over time. The variable -10 dB to +30 dB gain range allows a controller to maintain a consistent downstream level, while 0.3 dB absolute-gain accuracy supports reproducible scaling. Its low 1.4 nV/√Hz input-noise density is useful for low-level sensing, and the two independent channels can support redundant or complementary sensor paths. Industrial implementations should verify EMI immunity, grounding strategy, control-voltage stability, and the operating-temperature requirements of the surrounding equipment.

What is the AD602JN?
The AD602JN is a dual-channel, low-noise, wideband variable-gain amplifier from Analog Devices. Each channel provides independent gain control over -10 dB to +30 dB, supports two 30 dB gain ranges, and is optimized for ultrasound imaging. According to the Analog Devices AD602 Data Sheet, Rev. F, the device also serves broadband applications requiring precise gain, low noise, low distortion, and bandwidth up to 35 MHz.
What is the gain range of the AD602JN?
The AD602JN provides a gain range of -10 dB to +30 dB on each channel. The manufacturer describes two separate gain ranges, with each range covering 30 dB and a linear-in-decibel control response. According to the Analog Devices AD602 Data Sheet, Rev. F, this arrangement supports calibrated gain adjustment and predictable control scaling in ultrasound receivers and other precision analog signal chains.
What is the bandwidth and noise performance of the AD602JN?
The AD602JN has bandwidth up to 35 MHz at the -3 dB point and an input noise density of 1.4 nV/√Hz. According to the Analog Devices AD602 Data Sheet, Rev. F, these characteristics allow the amplifier to combine wideband signal handling with low-noise gain control. The combination is useful when a received signal must be amplified without adding substantial broadband noise before conversion or detection.
Where can I download the AD602JN datasheet PDF?
The official AD602 datasheet and product resources are available from Analog Devices at the product page identified by the AD602JN datasheet URL. The page includes the AD602 Data Sheet, Rev. F, product-selection information, documentation, and ordering resources. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet when assigning PCB functions and designing the dual ±5.25 V supply arrangement.
Where can I find the AD602JN pinout?
The AD602JN pin assignment is published in the AD602 Data Sheet, Rev. F, on Analog Devices’ official product page. The AD602JN is a 16-lead PDIP device, and the datasheet’s pin-configuration drawing identifies the two channels, gain-control inputs, supply pins, and ground connections. Use that drawing directly when laying out the through-hole footprint and routing sensitive gain-control and output nodes.
Is the AD602JN suitable for ultrasound imaging?
Yes, the AD602JN is specifically optimized for ultrasound imaging systems. Its dual independent gain channels, -10 dB to +30 dB range, 1.4 nV/√Hz input noise density, and bandwidth up to 35 MHz support amplification and control of weak reflected signals. According to the Analog Devices AD602 Data Sheet, Rev. F, the device is also applicable to any system requiring precise gain, low noise, low distortion, and wide bandwidth.
AD602JN vs AD600JN - which is better for ultrasound?
The AD602JN is the better match when an ultrasound receiver needs attenuation below 0 dB, because it covers -10 dB to +30 dB, while the AD600JN covers 0 dB to +40 dB. Both are dual low-noise, wideband variable-gain amplifiers in 16-lead PDIP packages. According to the Analog Devices AD600/AD602 family description, the AD602’s lower gain range supports applications that require negative gain for gain-range expansion.
When should I choose the AD602JN over the AD600JN?
Choose the AD602JN when the receiver gain plan requires attenuation from -10 dB to +30 dB or depends on two 30 dB gain ranges with linear-in-decibel response. Choose the AD600JN instead when the system only needs a 0 dB to +40 dB range. Both devices share the dual-channel, low-noise VGA architecture and 16-lead PDIP format, but their usable gain windows differ by a 10 dB offset.
What can replace the AD602JN?
The AD600JN is the closest same-package, pin-compatible replacement identified for the AD602JN because both are 16-lead PDIP dual-channel variable-gain amplifiers. The functional difference is the gain window: the AD602JN spans -10 dB to +30 dB, while the AD600JN spans 0 dB to +40 dB. Confirm control-voltage scaling, bandwidth, distortion, supply requirements, and existing PCB routing before approving the substitution.
Is the AD600JN the same as the AD602JN?
No, the AD600JN and AD602JN share the same general dual-VGA architecture and PDIP format, but they have different gain ranges. The AD602JN provides -10 dB to +30 dB, while the AD600JN provides 0 dB to +40 dB. According to the Analog Devices family description, the lower gain of the AD602 enables a useful operating region below 0 dB, so the two parts should not be treated as functionally identical without circuit-level review.
What is the best drop-in replacement for the AD602JN?
The AD600JN is the best-supported drop-in candidate because it retains the dual-channel variable-gain-amplifier function and 16-lead PDIP package. Its principal parameter difference is a 10 dB shift in gain coverage: -10 dB to +30 dB for the AD602JN versus 0 dB to +40 dB for the AD600JN. Verify gain-control polarity, control-voltage range, bandwidth, noise, distortion, and pin functions in the manufacturer documentation before substitution.
How should the AD602JN be powered?
The AD602JN operates from dual ±5.25 V supplies, allowing positive and negative signal swing around ground. Decouple each supply rail close to the device with suitable high-frequency and bulk capacitance, and keep return-current paths short. Because gain accuracy is specified as 0.3 dB and distortion is specified at a 1 V output, power-supply noise, grounding, and output operating point must be considered during layout.
How much power does the AD602JN dissipate?
The exact power dissipation depends on output amplitude, load, quiescent current, and supply conditions, so the AD602JN’s application-specific dissipation should be calculated rather than inferred from the ±5.25 V rating alone. Estimated: use the actual quiescent current, output-stage current, and rail voltages in P = Σ(Vrail × Ic(rail)). Compare the resulting junction-temperature rise with the maximum junction temperature stated in the manufacturer datasheet.
Is the AD602JN RoHS compliant?
The RoHS status of the AD602JN requires confirmation from the current Analog Devices product documentation or declaration for the exact ordering code. The available product information confirms the AD602JN’s commercial-grade 0 °C to +70 °C specification and 16-lead PDIP package, but it does not explicitly state the material-compliance declarations. Request the current manufacturer compliance statement for AD602JN before treating the component as RoHS, REACH, lead-free, or halogen-free qualified.
What are the key specifications of the AD602JN that engineers should know?
The AD602JN combines two independent variable-gain channels, a -10 dB to +30 dB gain range, two 30 dB gain segments, 0.3 dB absolute-gain accuracy, 1.4 nV/√Hz input noise density, and bandwidth up to 35 MHz. According to the Analog Devices AD602 Data Sheet, Rev. F, it also provides a linear-in-decibel gain response and -60 dBc total harmonic distortion at a 1 V output. The device uses dual ±5.25 V supplies in a 16-lead PDIP package.

Data referensi kejuruteraan untuk AD602JN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD602JN for dual-channel ultrasound, medical imaging, communications, instrumentation, or sensor-interface designs that need low-noise variable gain extending below 0 dB. Its -10 dB to +30 dB range is especially useful when the receiver must attenuate strong signals or when a system benefits from a negative-gain operating segment. The 0.3 dB absolute-gain accuracy, 1.4 nV/√Hz input noise density, and bandwidth to 35 MHz make it appropriate for wideband precision signal chains.

Consider the AD600JN when the required gain window is 0 dB to +40 dB. It retains the same dual-channel architecture and 16-lead PDIP format, making it the closest identified drop-in candidate, but the gain-control calibration must be revisited because its usable range is shifted upward by 10 dB. Before substituting either device, verify the complete pin assignments, control-voltage range, supply arrangement, output swing, distortion, and bandwidth at the intended operating point.

Perbandingan dengan Gantian

Parametr Produk Ini AD600JN
Brand Analog Devices Analog Devices
Package 16-lead PDIP 16-lead PDIP
Number of Channels 2 channels 2 channels
Gain Range -10 dB to +30 dB 0 dB to +40 dB
Gain Range Count 2 ranges of 30 dB 2 ranges of 30 dB
Gain Control Response Linear in dB Linear in dB

Penyeberangsung Jelas

  • Provides a usable negative-gain region (vsAD600JN)
  • Two independent variable-gain channels (vsAD600JN)
  • Wideband signal adjustment with linear-in-decibel control (vsAD600JN)

Catatan Desain

Decouple both ±5.25 V rails independently and place the capacitors close to the device power pins. Keep the positive and return current paths short to reduce supply-related gain errors and prevent the dual supply architecture from introducing common-mode or differential noise into the high-bandwidth signal path.

Route the two gain-control inputs away from clock, switching-node, and high-current return paths. The linear-in-decibel control characteristic simplifies calibration, but only if the control voltage at the pins remains clean; excessive control-path noise can become gain modulation. Maintain a continuous ground reference around the 16-lead PDIP footprint.

Evaluate gain, distortion, and stability across the intended frequency range rather than relying only on the 35 MHz -3 dB bandwidth. Keep output loading compatible with the operating point, preserve adequate output swing, and verify that gain-control bandwidth supports the required settling time. Use the manufacturer electrical-characteristics tables for the final operating conditions.

Do not treat the AD602JN and AD600JN as identical during replacement. Their gain windows are shifted by 10 dB: -10 dB to +30 dB for the AD602JN and 0 dB to +40 dB for the AD600JN. Confirm gain-control polarity and voltage scaling, then recalibrate the system even when the package and pin arrangement remain unchanged.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product information identifies a commercial-grade component but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for AD602JN.

Pencarian Berhubungan

AD602JN datasheet AD602JN specifications AD602JN pinout AD602JN datasheet pdf AD602JN equivalent AD602JN replacement AD602JN cross reference AD602JN vs AD600JN AD602JN ultrasound amplifier AD602JN 35 MHz variable gain amplifier AD602JN 16 pin PDIP Analog Devices AD602JN AD602JN price AD602JN stock

Komponen dan Tanda berkaitan

Analog Devices AD602JN AD600JN AD602 dual-channel variable-gain amplifier VGA variable-gain amplifier amplifier IC analog signal chain linear-in-decibel gain response input noise density absolute gain accuracy total harmonic distortion ultrasound imaging medical imaging signal conditioning communications receiver test and measurement industrial sensor interface 16-lead PDIP PDIP package through-hole package dual ±5.25 V supply 35 MHz bandwidth semiconductor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ