AD622ANZ - Low-Cost Instrumentation Amplifier | Analog Devices
MPN: AD622ANZ ✓ AktifAD622ANZ Ringkasan
An instrumentation amplifier is a specialized analog amplifier category designed to measure small differential signals while rejecting large common-mode voltages. In the signal-chain hierarchy, the AD622 belongs to instrumentation amplifiers within amplifier ICs and analog signal-conditioning ICs. This makes it particularly useful when a sensor output is much smaller than the voltage shared by both sensor terminals and the surrounding electrical system.
The AD622 supports gains from 1 to 1000, with gains from 2 through 1000 established using one external resistor. According to the Analog Devices AD622 datasheet, it replaces conventional two-op-amp and three-op-amp discrete instrumentation-amplifier arrangements. This integration reduces board area and component count while preserving the gain-setting simplicity expected from a dedicated instrumentation amplifier. The 8-pin PDIP package also supports conventional through-hole assembly and prototyping.
The AD622 provides one amplifier channel in a traditional instrumentation-amplifier pin configuration. Its input pins, output, reference input, and gain-setting terminals are arranged for straightforward implementation of a difference amplifier. The manufacturer describes good common-mode rejection and superior linearity as key benefits of the integrated design. Applications include bridge-transducer interfaces, blood-pressure monitoring, biomedical instrumentation, current measurement, and general industrial sensor conditioning.
A typical AD622 circuit accepts a differential sensor signal at the input terminals and uses a precision external resistor to establish the required gain. The reference input allows the output to be shifted around a chosen voltage when the downstream converter has a limited input range. Designers should account for input and output common-mode limits, supply headroom, resistor tolerance, and the offset and gain errors of the complete signal chain.
For reliable layouts, keep the gain resistor and signal-path traces compact, provide adequate bypassing at the supply pins, and route high-impedance sensor inputs away from switching nodes and digital return currents. Grounding and shielding become increasingly important as gain rises, because offset error and leakage currents become more significant relative to the measured differential signal.
This page combines the manufacturer specifications, package and pin information, pricing fields, alternative-device analysis, and application-focused design guidance for faster engineering evaluation. It is intended to support component selection and circuit planning without replacing the complete manufacturer datasheet, reference circuits, or application notes.
Pilihan pengganti yang segera untuk AD622ANZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AD622ANZ (sama faktor bentuk dan kaki) — berbeza dalam Gain Range, Package, Product Type.
AD620ANZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AD620ANZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AD622ANZ Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Single-channel instrumentation amplifier |
| Gain Range | 1 to 1000 |
| Externally Programmed Gain Range | 2 to 1000 |
| Gain-Setting Method | One external resistor |
| Unity Gain Configuration | No external resistor required |
| Number of Amplifier Channels | 1 channel |
| Kemasan | 8-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Supply Voltage Range | ±18 V |
| Gain-Bandwidth Product | 1 MHz |
| Output Slew Rate | 1.2 V/µs |
Konfigurasi Pin AD622ANZ
| Pin 1 | RG — Gain-setting resistor connection |
| Pin 2 | -IN — Inverting input |
| Pin 3 | +IN — Non-inverting input |
| Pin 4 | V- — Negative supply connection |
| Pin 5 | REF — Reference input |
| Pin 6 | OUT — Amplified output |
| Pin 7 | V+ — Positive supply connection |
| Pin 8 | RG — Gain-setting resistor connection |
Aplikasi Biasa
AD622ANZ patut untuk 6 aplikasis: Bridge Transducer Signal Conditioning, Biomedical Sensor Measurement, Industrial Current Sensing, Precision Difference Amplifier, Pressure Sensor Interface, Instrumentation and Data Acquisition.
Bridge Transducer Signal Conditioning
The AD622ANZ is well suited to conditioning small differential outputs from resistive bridge sensors because its instrumentation-amplifier architecture amplifies the sensor differential while rejecting common-mode voltage. A single external resistor sets gains from 2 through 1000, allowing the circuit to accommodate bridge sensitivities ranging from millivolts to hundreds of millivolts. The designer must keep excitation and ground currents out of the input traces because they can add offset and reduce common-mode rejection. Supply headroom must also support the selected gain and the maximum expected bridge output.
Disebarkan
Biomedical Sensor Measurement
The AD622ANZ can amplify differential bio-sensor signals where the desired physiological waveform is much smaller than the common-mode voltage present on patient-connected inputs. Its programmable gain from 1 to 1000 and conventional resistor-programmed gain network support measurement ranges from millivolt to volt-level sensor outputs. For medical equipment, the complete signal path must also satisfy the relevant safety, leakage, isolation, and precision requirements; the amplifier alone does not establish compliance for the finished instrument.
Disebarkan
Industrial Current Sensing
The AD622ANZ is appropriate for current-sense amplifier circuits that present a small differential voltage across a shunt resistor. The high common-mode rejection helps preserve the shunt measurement when the supply or load voltage changes, while gain adjustment from 2 to 1000 permits output scaling to the measurement converter's input range. Designers should check the AD622 input and output common-mode limits at the selected supply voltage and account for shunt resistance, Kelvin routing, amplifier offset, and the output saturation required by the system.
Disebarkan
Precision Difference Amplifier
The AD622ANZ can implement a complete differential-to-single-ended measurement stage when a sensor outputs two voltages that must be subtracted. Its integrated instrumentation-amplifier topology provides common-mode rejection, linear gain, and a reference terminal that can bias the output for downstream conversion. Gain of 1 is available without an external resistor, while higher gains use one component between the RG pins. The design should include input protection appropriate to the source and verify output headroom whenever the differential input changes polarity.
Disebarkan
Pressure Sensor Interface
The AD622ANZ provides a practical front end for resistive pressure elements that produce a differential excitation-dependent output. Its gain range of 1 to 1000 permits substantial amplification before conversion by a data-acquisition or embedded controller. The reference input can establish an output operating point suitable for single-supply conversion circuitry, while the 8-pin PDIP package simplifies through-hole prototypes and industrial control boards. Sensor excitation stability and warm-up time must be included in the end-to-end error budget.
Disebarkan
Instrumentation and Data Acquisition
The AD622ANZ suits laboratory and industrial data-acquisition front ends that must amplify low-level differential signals before an ADC. Gains from 2 through 1000 can be established with one resistor, and the traditional 8-pin pin configuration makes the circuit straightforward to implement on a through-hole analog board. Gain bandwidth, output settling, common-mode range, and offset determine how closely the front end can support a selected sample rate. The reference pin can also shift the measurement into the input range of a converter with an unipolar input.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AD622ANZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | AD620ANZ | AD620AN |
|---|---|---|---|
| Package | PDIP-8 | PDIP-8 | PDIP-8 |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Instrumentation amplifier | Instrumentation amplifier | Instrumentation amplifier |
| Number of Channels | 1 channel | 1 channel | 1 channel |
| Maximum Gain | 1,000 | 10,000 | 10,000 |
| Gain-Setting Method | One external resistor for gains from 2 to 1000 | One external resistor for gains from 1 to 10,000 | One external resistor for gains from 1 to 10,000 |
| Reference Input | Yes | Yes | Yes |
Penyeberangsung Jelas
- Moderate-gain range aligned with conventional sensor measurement designs (vsAD620ANZ)
- Lower maximum gain simplifies resistor selection (vsAD620AN)
- Single-channel integration reduces discrete amplifier count (vsAD620ANZ)
Catatan Desain
Do not substitute the AD620ANZ gain resistor directly for an AD622ANZ design without recalculating the value. The maximum gain changes from 1,000 to 10,000, and resistor tolerance, offset contribution, bandwidth, and noise all become part of the replacement decision. Revalidate the input and output common-mode ranges at the intended supply voltage and confirm that the new part can remain linear at the highest expected signal level.
Keep the AD622ANZ gain-setting resistor physically short and connect it directly between pins 1 and 8. Long traces can add parasitic resistance, pick up interference, and alter the intended gain. Route the two high-impedance input nets together where practical so that differential pickup and ground-current coupling affect both inputs similarly. Avoid routing sensor inputs beneath switching-regulator nodes and power inductors.
Check both input and output headroom against the selected supply voltage and gain. A gain that would be valid at ±18 V may overload the signal or output stage in a single-supply design. Use the reference input to center the output when the downstream converter has a unipolar input range, and verify that the reference voltage remains within the permitted common-mode region for the selected configuration.
Maklumat Kesediaan
Compliance attributes are not explicitly stated in the available manufacturer and distributor information. Verify the current declarations for the exact ordered part and assembly package with Analog Devices.