Analog Devices

AD622ANZ - Low-Cost Instrumentation Amplifier | Analog Devices

MPN: AD622ANZ ✓ Hoạt động
±18 V Vdss 8-pin PDIP Package
MOQ: 1 |

AD622ANZ Tóm tắt

The Analog Devices AD622ANZ is a low-cost, single-channel instrumentation amplifier with programmable gains from 2 to 1000 and a unity gain of 1 without an external gain resistor. The device uses an 8-pin PDIP package and is designed for differential measurement, sensor conditioning, and current-sense applications. Its gain can be set with one external resistor between the RG pins, while its integrated architecture provides common-mode rejection, linearity, temperature stability, and low power consumption.

An instrumentation amplifier is a specialized analog amplifier category designed to measure small differential signals while rejecting large common-mode voltages. In the signal-chain hierarchy, the AD622 belongs to instrumentation amplifiers within amplifier ICs and analog signal-conditioning ICs. This makes it particularly useful when a sensor output is much smaller than the voltage shared by both sensor terminals and the surrounding electrical system.

The AD622 supports gains from 1 to 1000, with gains from 2 through 1000 established using one external resistor. According to the Analog Devices AD622 datasheet, it replaces conventional two-op-amp and three-op-amp discrete instrumentation-amplifier arrangements. This integration reduces board area and component count while preserving the gain-setting simplicity expected from a dedicated instrumentation amplifier. The 8-pin PDIP package also supports conventional through-hole assembly and prototyping.

The AD622 provides one amplifier channel in a traditional instrumentation-amplifier pin configuration. Its input pins, output, reference input, and gain-setting terminals are arranged for straightforward implementation of a difference amplifier. The manufacturer describes good common-mode rejection and superior linearity as key benefits of the integrated design. Applications include bridge-transducer interfaces, blood-pressure monitoring, biomedical instrumentation, current measurement, and general industrial sensor conditioning.

A typical AD622 circuit accepts a differential sensor signal at the input terminals and uses a precision external resistor to establish the required gain. The reference input allows the output to be shifted around a chosen voltage when the downstream converter has a limited input range. Designers should account for input and output common-mode limits, supply headroom, resistor tolerance, and the offset and gain errors of the complete signal chain.

For reliable layouts, keep the gain resistor and signal-path traces compact, provide adequate bypassing at the supply pins, and route high-impedance sensor inputs away from switching nodes and digital return currents. Grounding and shielding become increasingly important as gain rises, because offset error and leakage currents become more significant relative to the measured differential signal.

This page combines the manufacturer specifications, package and pin information, pricing fields, alternative-device analysis, and application-focused design guidance for faster engineering evaluation. It is intended to support component selection and circuit planning without replacing the complete manufacturer datasheet, reference circuits, or application notes.

Bộ thay thế dễ dàng lắp đặt cho AD622ANZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD622ANZ (cùng hình factor và footprint) — khác nhau ở Gain Range, Package, Product Type.

Analog Devices
Gain Range: 1 to 10,000
Package: 8-lead PDIP
Product Type: Low-cost, low-power, high-accuracy instrumentation amplifier
So sánh với AD622ANZ →

AD620ANZ

✅ Drop-In
Analog Devices
📦 PDIP-8
Low-cost, low-power, high-accuracy instrumentation amplifier · 1 channel · 1 to 10,000 · One external resistor · 1 MHz · 1.3 mA · 2 nA

Liên hệ để biết giá

Xem tài liệu →

AD620ANZ

✅ Drop-In
Analog Devices
📦 PDIP-8
Low-cost, low-power, high-accuracy instrumentation amplifier · 1 channel · 1 to 10,000 · One external resistor · 1 MHz · 1.3 mA · 2 nA

Liên hệ để biết giá

Xem tài liệu →

AD622ANZ Tỷ lệ tối đa & tính chất điện

Product Type Single-channel instrumentation amplifier
Gain Range 1 to 1000
Externally Programmed Gain Range 2 to 1000
Gain-Setting Method One external resistor
Unity Gain Configuration No external resistor required
Number of Amplifier Channels 1 channel
Hộp 8-pin PDIP
Kiểu lắp đặt Through-hole
Supply Voltage Range ±18 V
Gain-Bandwidth Product 1 MHz
Output Slew Rate 1.2 V/µs

Cấu hình chân AD622ANZ

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Chân 1 RG — Gain-setting resistor connection
Chân 2 -IN — Inverting input
Chân 3 +IN — Non-inverting input
Chân 4 V- — Negative supply connection
Chân 5 REF — Reference input
Chân 6 OUT — Amplified output
Chân 7 V+ — Positive supply connection
Chân 8 RG — Gain-setting resistor connection

Ứng dụng tiêu biểu

AD622ANZ phù hợp cho 6 Áp dụngs: Bridge Transducer Signal Conditioning, Biomedical Sensor Measurement, Industrial Current Sensing, Precision Difference Amplifier, Pressure Sensor Interface, Instrumentation and Data Acquisition.

🏭

Bridge Transducer Signal Conditioning

The AD622ANZ is well suited to conditioning small differential outputs from resistive bridge sensors because its instrumentation-amplifier architecture amplifies the sensor differential while rejecting common-mode voltage. A single external resistor sets gains from 2 through 1000, allowing the circuit to accommodate bridge sensitivities ranging from millivolts to hundreds of millivolts. The designer must keep excitation and ground currents out of the input traces because they can add offset and reduce common-mode rejection. Supply headroom must also support the selected gain and the maximum expected bridge output.

💊

Biomedical Sensor Measurement

The AD622ANZ can amplify differential bio-sensor signals where the desired physiological waveform is much smaller than the common-mode voltage present on patient-connected inputs. Its programmable gain from 1 to 1000 and conventional resistor-programmed gain network support measurement ranges from millivolt to volt-level sensor outputs. For medical equipment, the complete signal path must also satisfy the relevant safety, leakage, isolation, and precision requirements; the amplifier alone does not establish compliance for the finished instrument.

⚡

Industrial Current Sensing

The AD622ANZ is appropriate for current-sense amplifier circuits that present a small differential voltage across a shunt resistor. The high common-mode rejection helps preserve the shunt measurement when the supply or load voltage changes, while gain adjustment from 2 to 1000 permits output scaling to the measurement converter's input range. Designers should check the AD622 input and output common-mode limits at the selected supply voltage and account for shunt resistance, Kelvin routing, amplifier offset, and the output saturation required by the system.

🔧

Precision Difference Amplifier

The AD622ANZ can implement a complete differential-to-single-ended measurement stage when a sensor outputs two voltages that must be subtracted. Its integrated instrumentation-amplifier topology provides common-mode rejection, linear gain, and a reference terminal that can bias the output for downstream conversion. Gain of 1 is available without an external resistor, while higher gains use one component between the RG pins. The design should include input protection appropriate to the source and verify output headroom whenever the differential input changes polarity.

📟

Pressure Sensor Interface

The AD622ANZ provides a practical front end for resistive pressure elements that produce a differential excitation-dependent output. Its gain range of 1 to 1000 permits substantial amplification before conversion by a data-acquisition or embedded controller. The reference input can establish an output operating point suitable for single-supply conversion circuitry, while the 8-pin PDIP package simplifies through-hole prototypes and industrial control boards. Sensor excitation stability and warm-up time must be included in the end-to-end error budget.

🖥️

Instrumentation and Data Acquisition

The AD622ANZ suits laboratory and industrial data-acquisition front ends that must amplify low-level differential signals before an ADC. Gains from 2 through 1000 can be established with one resistor, and the traditional 8-pin pin configuration makes the circuit straightforward to implement on a through-hole analog board. Gain bandwidth, output settling, common-mode range, and offset determine how closely the front end can support a selected sample rate. The reference pin can also shift the measurement into the input range of a converter with an unipolar input.

What is the AD622ANZ gain range and package?
The AD622ANZ provides gains from 1 to 1000 and is packaged in an 8-pin PDIP. According to the Analog Devices AD622 datasheet, gains from 2 to 1000 require one external gain-setting resistor between the RG terminals, while unity gain can be configured without an external resistor. The through-hole PDIP package is intended for conventional PCB assembly, prototypes, and designs where a surface-mount package is not required.
Where can I download the AD622ANZ datasheet PDF?
The official AD622ANZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD622.pdf. The document describes the instrumentation amplifier, gain-setting method, electrical characteristics, pin configuration, and typical application circuits. Use the Analog Devices AD622 product page at https://www.analog.com/en/products/ad622.html for the latest product overview, documentation, tools, and lifecycle information.
Where can I find the AD622ANZ pinout?
The AD622ANZ uses the conventional 8-pin instrumentation-amplifier arrangement documented in the Analog Devices AD622 datasheet. Pin 1 and pin 8 connect to the gain-setting resistor, pins 2 and 3 are the differential inputs, pin 4 is the negative supply, pin 5 is the reference input, pin 6 is the output, and pin 7 is the positive supply. Verify the final connection against the package drawing before PCB layout release.
Can AD622ANZ operate at a gain of 1?
Yes, the AD622ANZ can operate at a gain of 1 without an external gain resistor. According to the Analog Devices AD622 datasheet, one external resistor sets gains from 2 through 1000, with resistor value selected from the manufacturer gain equation. At unity gain, confirm input and output common-mode limits for the intended supply voltage and signal range, because these conditions remain constrained even when no gain-setting resistor is installed.
What is the AD622ANZ used for?
The AD622ANZ is used to amplify small differential sensor signals while rejecting common-mode voltage. Typical uses include bridge-transducer interfaces, biomedical measurement, industrial sensor conditioning, and current measurement. According to the Analog Devices product documentation, the integrated instrumentation amplifier replaces discrete two-op-amp and three-op-amp designs, reducing board area while simplifying gain selection with one external resistor.
What can replace the AD622ANZ?
The AD620ANZ is the closest documented drop-in candidate for the AD622ANZ because both are Analog Devices 8-pin PDIP instrumentation amplifiers with the conventional input, reference, output, supply, and RG connection pattern. However, the gain ranges differ: the AD622 supports gains from 1 to 1000, while the AD620 supports gains from 1 to 10,000. Confirm offset, bandwidth, common-mode rejection, supply range, and resistor-value requirements before substitution.
What is the best drop-in replacement for AD622ANZ?
The AD620ANZ is the strongest documented drop-in replacement because it retains the 8-pin PDIP footprint and conventional instrumentation-amplifier pinout. The principal functional difference is gain range: AD620ANZ supports gains up to 10,000, whereas AD622ANZ supports gains up to 1000. A replacement is appropriate only after checking the target gain resistor, input and output common-mode limits, bandwidth, offset, and required supply voltage.
AD622ANZ vs AD620ANZ - which is better for a bridge sensor?
The AD622ANZ is generally the more appropriate choice when the design needs moderate gain, accuracy, and a simple 1-to-1000 gain range. The AD620ANZ supports a wider 1-to-10,000 range and may suit systems requiring higher gain, but its gain resistor values and full electrical characteristics must be reviewed against the bridge excitation, sensor impedance, and output bandwidth. Both devices use an 8-pin PDIP and the conventional instrumentation-amplifier layout.
What is the difference between AD622ANZ and AD620ANZ?
The principal documented difference is the supported gain range. The AD622ANZ operates from gain 1 to 1000, while the AD620ANZ operates from gain 1 to 10,000. Both are single-channel Analog Devices instrumentation amplifiers in 8-pin PDIP packages. Other distinctions, including offset voltage, bandwidth, noise, common-mode rejection, and current consumption, should be compared from the manufacturer datasheets for the exact operating conditions.
When should I choose AD622ANZ over AD620ANZ?
Choose the AD622ANZ when a moderately accurate, low-cost instrumentation amplifier with gains from 1 to 1000 is sufficient for the sensor signal. Choose the AD620ANZ when the system requires a broader gain range extending to 10,000 or needs different offset, noise, bandwidth, or common-mode performance. For either device, calculate the gain resistor and verify that the selected gain, signal bandwidth, and output swing remain within the power-supply limits.
Is AD622ANZ suitable for bridge and biomedical sensors?
Yes, the AD622ANZ is suitable for differential sensor interfaces including bridge transducers and biomedical instrumentation when its input range and accuracy meet the application requirements. Its integrated three-amplifier-style architecture provides common-mode rejection and linear differential amplification, while one external resistor establishes gains from 2 to 1000. Bias the reference input appropriately and verify offset, noise, excitation settling, and patient-safety requirements in the final system.
What is the best Analog Devices equivalent for AD622ANZ?
The AD620ANZ is the best documented Analog Devices equivalent based on package and pin compatibility, because both are 8-pin PDIP instrumentation amplifiers using the conventional RG, input, supply, reference, and output arrangement. It is not an identical functional specification: its maximum programmed gain is 10,000 versus 1,000 for the AD622ANZ. Validate the gain resistor and all critical electrical parameters before using it as a replacement.
How do I choose the AD622ANZ gain resistor?
Choose the AD622ANZ gain resistor by calculating the desired gain from 2 through 1000 and using the gain-setting equation in the Analog Devices AD622 datasheet. Keep the resistor close to pins 1 and 8 to minimize parasitic resistance and noise pickup. Use an appropriate resistor tolerance and power rating, and confirm the selected gain against the sensor output, bandwidth, input common-mode range, and expected output swing.
Where can I buy AD622ANZ and check its current lead time?
Use the Request a Quote form on this page to request AD622ANZ availability, current lead time, order quantity, and delivery options. The listing identifies the part as an Analog Devices 8-pin PDIP instrumentation amplifier, but a distributor inventory badge alone does not define the quantity available for every configuration. Submit the required quantity and assembly packaging with the request so current sourcing can be confirmed.
What are the key specifications of AD622ANZ that engineers should know?
The key AD622ANZ specifications are one amplifier channel, programmable gain from 1 to 1000, one-resistor gain adjustment for gains from 2 to 1000, and an 8-pin PDIP package. The Analog Devices datasheet also identifies the device as a low-cost instrumentation amplifier with good common-mode rejection and improved linearity compared with discrete implementations. Supply range, exact offset, noise, bandwidth at each gain, and temperature limits must be taken from the manufacturer datasheet for the final design.

Dữ liệu tham khảo kỹ thuật cho AD622ANZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD622ANZ when the design requires a low-cost, single-channel instrumentation amplifier with moderate gain from 1 to 1000 and can use an 8-pin PDIP footprint. Its one-resistor gain-setting method and integrated differential architecture are convenient for bridge sensors, current measurement, biomedical probes, and laboratory data-acquisition inputs. Choose the AD620ANZ when the application genuinely needs gains up to 10,000 or requires the AD620 family's different offset, noise, bandwidth, and power characteristics; the gain resistor and every operating limit must then be recalculated. The AD620AN is another documented PDIP option in the same family, but suffix, temperature, packaging, and ordering requirements should be confirmed from the manufacturer. Neither alternative should be released as a replacement until the input range, output swing, common-mode performance, stability, and system error budget have been compared under the actual operating conditions.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD620ANZ AD620AN
Package PDIP-8 PDIP-8 PDIP-8
Brand Analog Devices Analog Devices Analog Devices
Product Type Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier
Number of Channels 1 channel 1 channel 1 channel
Maximum Gain 1,000 10,000 10,000
Gain-Setting Method One external resistor for gains from 2 to 1000 One external resistor for gains from 1 to 10,000 One external resistor for gains from 1 to 10,000
Reference Input Yes Yes Yes

Bảo phân biệt quan trọng

  • Moderate-gain range aligned with conventional sensor measurement designs (vsAD620ANZ)
  • Lower maximum gain simplifies resistor selection (vsAD620AN)
  • Single-channel integration reduces discrete amplifier count (vsAD620ANZ)

Ghi chú thiết kế

Do not substitute the AD620ANZ gain resistor directly for an AD622ANZ design without recalculating the value. The maximum gain changes from 1,000 to 10,000, and resistor tolerance, offset contribution, bandwidth, and noise all become part of the replacement decision. Revalidate the input and output common-mode ranges at the intended supply voltage and confirm that the new part can remain linear at the highest expected signal level.

Keep the AD622ANZ gain-setting resistor physically short and connect it directly between pins 1 and 8. Long traces can add parasitic resistance, pick up interference, and alter the intended gain. Route the two high-impedance input nets together where practical so that differential pickup and ground-current coupling affect both inputs similarly. Avoid routing sensor inputs beneath switching-regulator nodes and power inductors.

Check both input and output headroom against the selected supply voltage and gain. A gain that would be valid at ±18 V may overload the signal or output stage in a single-supply design. Use the reference input to center the output when the downstream converter has a unipolar input range, and verify that the reference voltage remains within the permitted common-mode region for the selected configuration.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes are not explicitly stated in the available manufacturer and distributor information. Verify the current declarations for the exact ordered part and assembly package with Analog Devices.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD622ANZ datasheet AD622ANZ pinout AD622ANZ datasheet pdf AD622ANZ equivalent AD622ANZ replacement AD622ANZ vs AD620ANZ AD622ANZ gain resistor AD622ANZ PDIP-8 AD622ANZ bridge sensor amplifier AD622ANZ current sensing Analog Devices AD622ANZ AD622ANZ price AD622ANZ stock AD622ANZ lead time AD622ANZ application circuit

Các bộ phận và thuật ngữ liên quan

Analog Devices AD622ANZ AD622AN AD620ANZ AD620AN instrumentation amplifier differential amplifier signal-conditioning IC amplifier IC analog semiconductor common-mode rejection gain gain-setting resistor input offset voltage gain-bandwidth product PDIP-8 through-hole package bridge transducer biomedical sensor current-sense amplifier reference input data acquisition
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ