Analog Devices

AD628ARMZ - High Common-Mode Difference Amplifier | Analog Devices

MPN: AD628ARMZ ✓ Aktif
MOQ: 1 |

AD628ARMZ Ringkasan

Analog Devices AD628ARMZ is a precision difference amplifier for high common-mode voltage sensing, with programmable gain and excellent direct-current performance. It operates as a single-channel amplifier in an 8-lead MSOP package, making it suitable for battery monitoring, power-supply measurement, and conversion of high-voltage signals for single-supply ADCs.

A difference amplifier measures the voltage between two input nodes while rejecting signals common to both inputs. The AD628 combines this differential function with a high common-mode operating range, broad common-mode rejection across frequency, and a wideband feedback loop. That feedback architecture helps reduce distortion caused by the input capacitance of delta-sigma ADCs and improves measurement accuracy in high-impedance signal chains.

The AD628ARMZ supports programmable gain, allowing the same amplifier to scale small differential signals or reduce high input voltages into an ADC-friendly range. The available data identifies a slew rate of 0.3 V/us, a 600 kHz bandwidth, 75 dB common-mode rejection, 1.5 mV input offset voltage, and 1.5 nA input bias current. These parameters make the device appropriate for precision current and voltage sensing where input offset and bias currents can influence measurement error.

The common-mode range and resistor-divider architecture are particularly relevant to power-supply applications. The manufacturer describes the AD628 as suitable for battery chargers and similar equipment in which high voltages must be scaled into standard control voltages or currents. Its wideband feedback loop also supports systems that require accurate acquisition from capacitive sensor or ADC inputs.

Typical uses include battery-pack monitoring, charger feedback, industrial power rails, high-side current sensing, precision differential measurement, and signal conditioning for single-supply analog-to-digital converters. The 8-MSOP format supports compact PCB layouts, although careful common-mode range checking is essential because the allowable input range is application-dependent.

For a new design, verify supply voltage, input common-mode voltage, gain setting, output swing, and ADC input range before committing to the layout. Keep the differential input route short and symmetric, provide stable reference or gain-setting resistors, and use appropriate input filtering without adding excessive differential capacitance that could reduce phase margin.

This page consolidates the manufacturer’s product description, package information, differential-amplifier characteristics, application guidance, and practical replacement considerations to support faster component selection and PCB planning.

Pilihan pengganti yang segera untuk AD628ARMZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

AD628ARMZ Penilaian maksimum & Ciri-ciri Elektrik

Tiada spesifikasi tersedia

Panduan Konfigurasi Pin AD628ARMZ standard

Konfigurasi pin untuk AD628ARMZ (standard pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai standard untuk AD628ARMZ

Tiada data garisan pin yang diperoleh untuk AD628ARMZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD628ARMZ patut untuk 6 aplikasis: Battery-Pack Monitoring, Power-Supply Feedback, High-Side Current Sensing, Single-Supply ADC Signal Conditioning, Precision Industrial Sensing, Battery-Charger Control.

⚡

Battery-Pack Monitoring

The AD628ARMZ fits battery monitoring because it measures a small differential cell or divider voltage while operating at a substantially higher common-mode voltage. Its 75 dB common-mode rejection helps suppress changes shared by both input nodes, while the 1.5 mV input offset and 1.5 nA bias current limit error in high-impedance sensing networks. A resistor divider can scale the battery voltage into the amplifier’s legal input range and into a level suitable for a single-supply ADC. The design must verify common-mode limits, supply voltage, gain, and output range over temperature.

⚡

Power-Supply Feedback

The AD628ARMZ is suitable for power-supply feedback where a regulated output must be divided down, measured differentially, and presented to an ADC or controller. Its precision difference-amplifier topology rejects common supply movement, while programmable gain permits a useful output range from either large or small differential inputs. The manufacturer specifically identifies battery chargers and similar power-supply equipment as suitable applications. Designers should calculate divider ratios and worst-case gain error, then verify the amplifier’s common-mode and output limits under startup and load-transient conditions.

🏭

High-Side Current Sensing

The AD628ARMZ can provide differential amplification around a high-side shunt measurement when the shunt voltage is small relative to its common-mode voltage. The 75 dB common-mode rejection reduces sensitivity to supply and ground movement, while 1.5 mV offset and 1.5 nA bias current help define the achievable low-level measurement accuracy. Its 600 kHz bandwidth covers many slower control and monitoring loops. The PCB should use Kelvin routing for the shunt, minimize parasitic resistance, and keep the amplifier within its specified common-mode range at every operating condition.

🖥️

Single-Supply ADC Signal Conditioning

The AD628ARMZ is designed for scaling high voltages into standard control voltages or currents suitable for single-supply ADCs. Its wideband feedback loop minimizes distortion caused by the input capacitance of delta-sigma converters, a valuable property when the measurement node includes filtering, protection, or cabling capacitance. Programmable gain supports a compact conversion from a high-voltage input to an ADC-compatible level. Before implementation, confirm that the selected gain, resistor network, and output range prevent clipping and that the ADC input remains within its settling and acquisition requirements.

🏭

Precision Industrial Sensing

The AD628ARMZ supports industrial measurement systems that must reject a large common-mode voltage while resolving a smaller sensor differential. Its precision offset voltage of 1.5 mV, bias current of 1.5 nA, and 75 dB common-mode rejection provide concrete limits for designing the analog front end. The 600 kHz bandwidth is suitable for many process and equipment monitoring loops that do not require megahertz signal bandwidth. Place input resistors and protection elements to preserve CMRR, isolate sensitive nodes from leakage, and verify operation over the complete industrial temperature range.

🔋

Battery-Charger Control

The AD628ARMZ can form the measurement element of a battery-charger control loop by scaling a high battery or stack voltage into a signal that a controller or ADC can evaluate. Difference-amplifier behavior limits the influence of shared voltage changes, and programmable gain supports different battery-voltage ranges. Analog Devices identifies battery chargers as a representative power-supply application for the resistor-divider approach. A robust design must include input protection, account for resistor tolerance and temperature drift, and keep the amplifier’s common-mode input inside the manufacturer-specified operating region.

What is the AD628ARMZ?
The AD628ARMZ is a single-channel precision difference amplifier with programmable gain and a high common-mode voltage range. According to the Analog Devices AD628 product page, it combines excellent direct-current performance with high common-mode rejection over a wide frequency range. The device is supplied in an 8-lead MSOP package and is intended for measuring small differential signals in the presence of larger common-mode voltages.
What are the key specifications of AD628ARMZ that engineers should know?
The AD628ARMZ provides programmable gain, a 600 kHz bandwidth, a 0.3 V/us slew rate, 75 dB common-mode rejection, 1.5 mV input offset voltage, and 1.5 nA input bias current. Analog Devices describes the AD628 as a precision difference amplifier with excellent direct-current performance and high common-mode rejection. It is packaged in an 8-lead MSOP and is particularly useful for scaling high voltages into signals suitable for single-supply ADCs.
What is the AD628ARMZ used for?
The AD628ARMZ is used for high common-mode voltage measurement, differential signal conditioning, battery monitoring, and power-supply feedback. The Analog Devices AD628 datasheet identifies resistor-divider scaling as suitable for battery chargers and similar equipment. Its wideband feedback loop is also designed to minimize distortion caused by capacitor charging at delta-sigma ADC inputs, making it useful ahead of precision converters.
Where can I download the AD628ARMZ datasheet PDF?
The official AD628ARMZ datasheet PDF is available from Analog Devices at the AD628 data-sheet URL listed on this page. The document contains the input common-mode equations, electrical characteristics, gain configurations, and application information needed for circuit design. Use the manufacturer document as the controlling reference for supply limits, package dimensions, resistor values, and operating conditions before finalizing a PCB.
Where can I find the AD628ARMZ pinout?
The AD628ARMZ pinout is found in the pin-configuration and package-drawing sections of the official AD628 manufacturer datasheet. The AD628ARMZ is an 8-lead MSOP device, and its external dimensions and land pattern should be checked against the current Analog Devices drawing before layout. Assign PCB nets from the datasheet pin-description table rather than inferring connections from amplifier-function conventions.
How does the AD628ARMZ reject common-mode voltage?
The AD628ARMZ rejects voltage shared by both differential inputs through its precision difference-amplifier architecture, with listed common-mode rejection of 75 dB. Analog Devices states that the device combines excellent direct-current behavior with high common-mode rejection over a wide frequency range. This rejection reduces errors when the wanted differential signal is small compared with the voltage present at both input nodes.
Can the AD628ARMZ condition signals for a single-supply ADC?
Yes, the AD628ARMZ can scale high voltages into standard control voltages or currents suitable for a single-supply ADC. The Analog Devices product description specifically identifies this use, while the data sheet notes that the wideband feedback loop reduces distortion effects associated with charging the input capacitance of delta-sigma ADCs. The selected gain must still keep every input and output within the device’s operating limits.
When should I choose the AD628ARMZ over another difference amplifier?
Choose the AD628ARMZ when the measurement requires a high common-mode input, differential cancellation, programmable gain, and operation from an 8-lead MSOP package. Its 75 dB common-mode rejection, 600 kHz bandwidth, and 1.5 mV input offset voltage make it suitable for precision sensing. Compare the required gain, common-mode range, supply voltage, and ADC interface against any lower-cost amplifier before final selection.
What is the best drop-in replacement for AD628ARMZ?
No independently verified drop-in replacement can be named with confidence from the available cross-reference information. A replacement must use the same MSOP-8 footprint, preserve pin assignments, and meet the required gain, common-mode range, offset voltage, bandwidth, and supply limits. Similar amplifier functions or alternate package options are not automatically drop-in substitutes, so each candidate should be checked against the official AD628 pin and electrical tables.
Can an AD628ARZ replace the AD628ARMZ?
The AD628ARZ should not be treated as a direct AD628ARMZ drop-in replacement because the listed package differs: AD628ARZ-RL is identified as an 8-SOIC product, whereas AD628ARMZ uses an 8-MSOP package. A change between SOIC-8 and MSOP-8 requires footprint and pin-compatibility verification rather than a simple part-number substitution. Use the current manufacturer documentation for the definitive package comparison.
What is the difference between AD628ARMZ and AD628ARMZ-RL?
AD628ARMZ-RL is an orderable packaging variant of the AD628ARMZ rather than a functionally different amplifier. The verified listing identifies AD628ARMZ as an 8-MSOP current-sense amplifier and the R7 listing as a related ADI order code. Ordering code, reel configuration, and availability should therefore be checked separately from the electrical function, which remains defined by the AD628 family documentation.
What performance matters when using AD628ARMZ in a power supply?
The key performance parameters are common-mode rejection of 75 dB, input offset voltage of 1.5 mV, input bias current of 1.5 nA, bandwidth of 600 kHz, and slew rate of 0.3 V/us. In a power-supply feedback path, verify that the common-mode voltage remains legal and that the selected gain produces an output within the ADC or controller range. Resistor-divider accuracy also affects total measurement error.
Is AD628ARMZ compliant with RoHS and REACH?
The AD628ARMZ is identified as RoHS 3 compliant and unaffected by REACH, with moisture sensitivity level 1 indicating unlimited floor life at the stated conditions. These environmental declarations support use in RoHS-controlled product construction, but they do not by themselves qualify the device for automotive, aerospace, or other specialized reliability programs. Confirm the exact order code and manufacturing status before production release.
Where can I buy AD628ARMZ and check its lead time?
Use the Request a Quote form on this page to request AD628ARMZ pricing, current stock, minimum order quantity, and production lead time from XAIPART. The available product listings identify the AD628ARMZ as an 8-MSOP Analog Devices current-sense amplifier, but a current quantity-break price and firm inventory commitment should be confirmed through the quote process rather than inferred from generic search listings.
How should AD628ARMZ be laid out for an ADC measurement circuit?
Route the two differential inputs together to minimize sensitivity to unequal pickup and board noise, and place configured gain-setting or divider resistors close to the relevant device pins. Check common-mode voltage, output swing, supply range, and the ADC’s allowable input capacitance. The AD628’s wideband feedback loop reduces distortion from ADC input charging, but poor grounding or asymmetric input routing can still degrade measurement accuracy.

Data referensi kejuruteraan untuk AD628ARMZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD628ARMZ when the design must measure a small differential voltage at a high common-mode potential and needs a precision single-channel difference amplifier with programmable gain. Its 75 dB common-mode rejection, 1.5 mV offset voltage, 1.5 nA bias current, 600 kHz bandwidth, and 0.3 V/us slew rate make it appropriate for battery monitoring, charger feedback, power-supply measurement, and single-supply ADC signal conditioning. The 8-lead MSOP format supports compact layouts, but the chosen footprint must be confirmed against the official package drawing. No alternative is recommended without a verified pin-for-pin MSOP-8 replacement that preserves the required common-mode range, gain behavior, bandwidth, offset, and supply operation. Order-code or tape-and-reel variants should not be treated as distinct engineering alternatives.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 8-lead MSOP
Brand Analog Devices
Amplifier Type Precision difference amplifier
Number of Channels 1 channel
Gain Programmable gain
Common-Mode Rejection 75 dB
Bandwidth 600 kHz
Slew Rate 0.3 V/us
Input Offset Voltage 1.5 mV
Input Bias Current 1.5 nA
RoHS Status Compliant

Catatan Desain

Confirm the common-mode input range at the actual resistor-divider node before applying gain or connecting an ADC. A differential amplifier can reject common-mode voltage only while that voltage remains within its legal operating range. Also verify the output swing with the selected supply and gain. Testing only at nominal input voltage can miss clipping during startup, battery disconnection, or maximum-line conditions.

Route the positive and negative measurement inputs as a close, symmetric pair to minimize pickup and parasitic mismatch. Use a ground-plane architecture, place configured gain-setting resistors near their associated pins, and keep the analog return path separate from switching-node currents. For a shunt measurement, use Kelvin connections so copper drops do not appear inside the sensed differential voltage.

Include input filtering for protection and noise control, but verify that differential capacitance does not upset the amplifier’s wideband feedback loop. The AD628’s feedback architecture addresses distortion caused by charging delta-sigma ADC inputs, yet excessive cable or protection capacitance can still alter frequency response. Use a controlled termination network, check settling with the actual ADC, and keep the filter close to the measurement source.

Maklumat Kesediaan

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available part information identifies RoHS 3 compliance, REACH unaffected status, and MSL 1 (unlimited). No vehicle-specific AEC-Q100 qualification, halogen-free declaration, or conflict-minerals declaration was identified for this exact order code.

Pencarian Berhubungan

AD628ARMZ AD628ARMZ datasheet AD628ARMZ datasheet pdf AD628ARMZ pinout AD628ARMZ specifications AD628ARMZ equivalent AD628ARMZ replacement AD628ARMZ cross reference AD628ARMZ footprint AD628ARMZ application circuit AD628ARMZ battery monitoring Analog Devices AD628ARMZ

Komponen dan Tanda berkaitan

Analog Devices AD628 AD628ARMZ difference amplifier precision difference amplifier instrumentation amplifier amplifier IC semiconductor programmable gain high common-mode voltage common-mode rejection ratio CMRR input offset voltage input bias current single-supply ADC delta-sigma ADC battery monitoring battery charger power-supply feedback high-side current sensing 8-lead MSOP MSOP family surface mount SMD RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ