Analog Devices

AD7482AST - 12-Bit 3 MSPS SAR ADC | Analog Devices

MPN: AD7482AST ✓ Aktif
5 V maximum single supply Vdss 2 A maximum Id 48-pin LQFP Package
MOQ: 1 |

AD7482AST Ringkasan

The Analog Devices AD7482AST is a 12-bit, single-channel successive-approximation ADC with a maximum throughput rate of 3 MSPS, a 40 MHz input bandwidth, and a 48-pin LQFP package. It operates from a single 5 V supply and provides a parallel output interface for high-speed data acquisition. The AD7482AST is designed for applications requiring rapid conversion without the pipeline delay associated with pipelined converters.

An ADC is an analog-to-digital converter that transforms a continuously varying input voltage into a numeric value suitable for digital processing. The AD7482 belongs to the successive-approximation ADC family, where a sampling circuit, internal comparator, and successive conversion process determine the digital result. Its architecture provides a straightforward parallel data path for systems that need predictable conversion timing and direct connection to digital control logic.

Key features include 3 MSPS throughput, 12-bit resolution, a wide 40 MHz input bandwidth, and low power consumption of 90 mW in full-power mode. The device also supports a 2.5 mW nap mode and a standby mode with a maximum current of 2 A. Two parallel interface modes allow the converter to be used in systems with different digital timing requirements. The on-board 2.5 V reference can be replaced by an external reference source when greater system-level control is needed.

The internal track-and-hold circuit can handle input frequencies in excess of 40 MHz, making the AD7482AST useful for high-speed sampling rather than only slow instrumentation signals. The conversion process has no pipeline delay, which simplifies timing analysis compared with a multistage pipeline ADC. The nominal analog input range is 0 V to 2.5 V, while the offset-shift capability allows the nominal range to be moved by plus or minus 200 mV.

Typical applications include industrial control and data-acquisition systems, test and measurement equipment, communications infrastructure, medical instrumentation, and embedded signal-processing platforms. The 3 MSPS conversion rate is useful for sampling waveforms, monitoring analog sensors, and digitizing control signals. The parallel interface requires careful PCB routing and consideration of the number of digital output lines used by the surrounding controller.

Designers should pay particular attention to input impedance, source settling, reference stability, and timing margins around the 3 MSPS operating rate. The input network should preserve the 40 MHz bandwidth requirement when higher-frequency signals are sampled. Power and ground distribution should be arranged to prevent reference or analog-signal corruption, particularly when the converter is operated close to its maximum throughput.

This product page combines the AD7482AST electrical characteristics, package information, interface considerations, typical applications, and available drop-in family references. It is intended to help engineers evaluate the converter for high-speed data acquisition and to plan the PCB, power, signal, and timing requirements before integrating the ADC.

Pilihan pengganti yang segera untuk AD7482AST — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD7482AST (sama faktor bentuk dan kaki) — berbeza dalam Package.

Analog Devices
Package: 48-lead LQFP
Bandingkan Dengan AD7482AST →

AD7482ASTZ

✅ Masuk Drop-In
📦 48-pin LQFP
Same 12-bit, 3 MSPS parallel ADC family and 48-pin LQFP footprint; order-code designation differs

📋 Alternatif rujukan (tidak dalam katalog)

AD7482BST

✅ Masuk Drop-In
Analog Devices
📦 48-pin LQFP
12 bit · Successive approximation register (SAR) · 3 MSPS · Above 40 MHz · Parallel · 1 channel · On-chip, low-noise, wide-bandwidth

Hubungi untuk harga

Lihat Datasheet →

AD7482BSTZ

✅ Masuk Drop-In
📦 48-pin LQFP
Same 12-bit, 3 MSPS parallel ADC family and 48-pin LQFP footprint; B-series designation differs

📋 Alternatif rujukan (tidak dalam katalog)

AD7482AST Penilaian maksimum & Ciri-ciri Elektrik

ADC Type Successive-approximation ADC
Pemecahkatan 12 bit
Maximum Throughput Rate 3 MSPS
Input Channels 1 channel
Input Bandwidth 40 MHz
Tegangan Pemberi Arus 5 V maximum single supply
On-Board Reference 2.5 V
Nominal Analog Input Range 0 V to 2.5 V
Offset Shift Range plus or minus 200 mV
Full-Power Consumption 90 mW
Nap Mode Consumption 2.5 mW
Standby Current 2 A maximum
Antaramuka Parallel
Interface Modes 2 parallel interface modes
Pipeline Delay None
Kemasan 48-pin LQFP
Package Dimensions 7 mm x 7 mm
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin AD7482AST 7 mm x 7 mm

Konfigurasi pin untuk AD7482AST (7 mm x 7 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 7 mm x 7 mm untuk AD7482AST

Tiada data garisan pin yang diperoleh untuk AD7482AST.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD7482AST patut untuk 6 aplikasis: Industrial Data Acquisition, Test and Measurement Equipment, Communications Signal Capture, Medical Monitoring Systems, Embedded Control Systems, Power and Process Monitoring.

🏭

Industrial Data Acquisition

The AD7482AST fits industrial data-acquisition systems that need rapid conversion of analog process signals without pipeline delay. Its 3 MSPS maximum throughput rate supports dense sampling of control, sensor, and instrumentation waveforms, while the 12-bit resolution provides 4096 digital codes for the nominal 0 V to 2.5 V input range. The parallel interface can connect efficiently to a controller or capture logic when timing is planned carefully. The 40 MHz input bandwidth also gives designers margin for source settling and signal conditioning. Use the internal 2.5 V reference for simplicity, or evaluate an external reference when system-level calibration requires common reference tracking. The principal design consideration is preserving settling time and reference integrity across repeated acquisitions.

🖥️

Test and Measurement Equipment

The AD7482AST is appropriate for oscilloscope-like, signal-analysis, and automated test equipment requiring predictable parallel conversion timing. At rates up to 3 MSPS, the successive-approximation architecture can sample repetitive or transient signals without the pipeline delay of a pipelined converter, simplifying acquisition-window calculations. The 12-bit result and 40 MHz input bandwidth are useful for digitizing medium-bandwidth waveforms after suitable input conditioning. Designers should place the sampling network close to the ADC, keep analog and digital return paths separated, and verify that the selected front end settles within the available acquisition interval. The single 5 V supply architecture helps reduce board-level power complexity.

🌐

Communications Signal Capture

The AD7482AST can support communications signal-capture modules that convert received analog information into parallel digital data. Its 3 MSPS throughput is suitable for moderate-rate envelope, IF, or baseband sampling when the selected architecture does not require a faster converter. The wide 40 MHz input bandwidth allows the analog path to preserve higher-frequency components, but the complete system must still meet sampling and anti-aliasing requirements. The no-pipeline-delay characteristic can simplify synchronization between the converter clock and capture logic. Engineers should use short analog traces, a quiet reference connection, and controlled clock distribution to prevent timing or coupling problems from limiting the usable dynamic range.

💊

Medical Monitoring Systems

The AD7482AST can serve in medical monitoring modules that digitize low-bandwidth physiological or diagnostic sensor signals where 12-bit resolution and a moderate conversion rate are sufficient. The 0 V to 2.5 V nominal input range and plus or minus 200 mV offset-shift capability can simplify front-end scaling around a single-supply signal. A 3 MSPS conversion capability allows the converter to oversample some slower sensors, although system-level anti-aliasing and clinical validation remain essential. The parallel output reduces the need for a serial ADC interface but increases routing requirements. Care should be taken with grounding, shielding, and isolation so that switching activity and external noise do not compromise measurement integrity.

🔧

Embedded Control Systems

The AD7482AST is useful in embedded controllers that acquire several analog channels sequentially or monitor rapidly changing control feedback. Its no-pipeline-delay operation provides a straightforward conversion event for a deterministic control loop, while the 12-bit resolution supports common position, pressure, and current measurements after suitable conditioning. The parallel bus must be mapped carefully to the processor or programmable logic, and unused outputs should be handled according to the manufacturer interface guidance. Designers can use the nap mode between bursts to reduce average power, but the controller must preserve the timing contract required for wake-up and the next conversion. Reference accuracy and source settling remain central to achieving repeatable results.

⚡

Power and Process Monitoring

The AD7482AST can be applied to power-supply and process-monitoring systems that need frequent numerical readings from conditioned analog nodes. A 3 MSPS rate allows short conversion windows and supports oversampling when the monitored quantity changes more quickly than the final filtering bandwidth. The 12-bit conversion resolution and 2.5 V nominal input range are suitable for many scaled voltage measurements, while the parallel interface enables direct transfer to monitoring logic. The analog input must be protected against transients and kept within the converter's permitted range. In addition, the reference and ground architecture should be designed so that switching converters and high-current traces do not inject errors into the sampled result.

What is the AD7482AST?
The AD7482AST is a 12-bit, single-channel successive-approximation ADC from Analog Devices with a maximum conversion rate of 3 MSPS and a parallel interface. According to the Analog Devices AD7482 datasheet, it uses a 48-pin LQFP package, supports a single 5 V supply, and includes an on-board 2.5 V reference. The device is suited to high-speed data acquisition, industrial measurement, communications, and instrumentation systems.
What are the key specifications of AD7482AST that engineers should know?
The AD7482AST provides 12-bit resolution, a 3 MSPS maximum throughput rate, 40 MHz input bandwidth, and a parallel data interface. The Analog Devices AD7482 datasheet also identifies 90 mW full-power consumption, 2.5 mW nap-mode consumption, two parallel interface modes, and no pipeline delay. These characteristics make the converter suitable for applications requiring deterministic sampling and relatively direct digital-output timing.
Where can I download the AD7482AST datasheet PDF?
The official AD7482AST datasheet is available from Analog Devices at the manufacturer datasheet URL listed on this page. It describes the AD7482 family's electrical characteristics, interface modes, reference implementation, input range, power modes, and package information. Use the manufacturer document for pin-level design decisions and for the complete operating conditions that accompany the AD7482AST.
Where can I find the AD7482AST pinout?
The AD7482AST pinout is found in the pin-description and package-outline sections of the Analog Devices AD7482 datasheet. The device uses a 48-pin LQFP package with parallel digital outputs, analog input connections, reference pins, supply pins, and control signals. Use that pin-description table when assigning PCB nets and when checking signal direction rather than inferring pins from the package outline.
Does the AD7482AST use an internal or external reference?
The AD7482AST includes an on-board 2.5 V reference and can also accept an externally provided 2.5 V reference source. According to the Analog Devices AD7482 datasheet, the internal reference simplifies standalone designs, while an external source allows the converter to be tied to a system reference for improved measurement control. The selected reference arrangement must follow the manufacturer application guidance.
What input voltage range does AD7482AST support?
The AD7482AST has a nominal analog input range of 0 V to 2.5 V. The Analog Devices AD7482 datasheet states that an offset-shift capability allows this nominal range to be offset by plus or minus 200 mV. This feature gives designers additional flexibility when defining the lower reference point of the input signal, particularly for single-supply systems with limited signal headroom.
How fast can AD7482AST perform conversions?
The AD7482AST performs conversions at rates up to 3 MSPS. According to the Analog Devices AD7482 datasheet, the successive-approximation conversion process has no pipeline delay. The 3 MSPS maximum rate is suitable for rapid sampling of periodic waveforms and analog control signals, provided that the source settling, clocking, digital-interface, and PCB timing requirements are also satisfied.
What power modes are available on AD7482AST?
The AD7482AST supports a 90 mW full-power mode, a 2.5 mW nap mode, and standby operation with a maximum current of 2 A. The Analog Devices AD7482 datasheet identifies these operating states for applications where conversion rate can be reduced during inactive periods. Mode selection should be coordinated with the system control logic so that the converter enters and leaves low-power states without corrupting an acquisition sequence.
Where can I buy AD7482AST online?
The AD7482AST can be requested through the Request a Quote form on this page. The form is the appropriate route for confirming availability, requested quantity, packaging, and current commercial terms without relying on a static price that may change. The product is identified by the exact manufacturer part number AD7482AST, so include that suffix when submitting the request.
What is the price of AD7482AST?
The current commercial price for AD7482AST should be confirmed through the Request a Quote form on this page. Pricing can vary with order quantity, package, and market conditions, so a current quotation provides a more useful purchasing figure than a stale listing value. Include the exact MPN AD7482AST and your required order quantity so the quote can be associated with the correct device.
What is the lead time for AD7482AST?
The current lead time and minimum order quantity for AD7482AST should be confirmed through the Request a Quote form on this page. Lead time can vary with the requested quantity, manufacturing status, and packaging configuration. Ask the supplier to quote AD7482AST specifically, because related order codes such as AD7482ASTZ can represent different delivery and labeling arrangements.
Is AD7482AST in stock?
Current AD7482AST inventory status should be checked through the Request a Quote form on this page. The form can return an availability response tied to the exact MPN and the requested quantity, which is more reliable than assuming that a related listing guarantees stock of this order code. State the required quantity and packaging preference in the quote request.
What is the difference between AD7482AST and AD7482ASTZ?
AD7482AST and AD7482ASTZ identify different order variants of the Analog Devices AD7482 family, while both are associated with the same 48-pin LQFP converter family and the same 12-bit, 3 MSPS parallel-interface architecture. The available family comparison identifies AD7482ASTZ as a complete replacement for AD7482AST in the cited comparison. Confirm the exact order-code details and packaging requirements before substitution.
What can replace AD7482AST?
AD7482ASTZ is a documented same-family drop-in replacement candidate for AD7482AST because the comparison identifies consistent performance, terminals, and package. AD7482BST and AD7482BSTZ are additional Analog Devices family references listed in the same package class. Verify the exact order code, electrical limits, temperature grade, and purchasing requirements in the manufacturer documentation before production substitution.
Is AD7482AST suitable for high-speed instrumentation?
The AD7482AST is suitable for high-speed instrumentation when the measured signal bandwidth and acquisition architecture fit its 3 MSPS conversion rate and 40 MHz input bandwidth. Its 12-bit resolution, no-pipeline-delay operation, and parallel interface make it useful for waveform sampling and control-loop data acquisition. The input driver and acquisition timing must preserve settling performance at the intended sampling frequency.

Data referensi kejuruteraan untuk AD7482AST — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose AD7482AST when the design requires a 12-bit, 3 MSPS, single-channel SAR ADC with a parallel interface, 40 MHz input bandwidth, and a 48-pin LQFP footprint. AD7482ASTZ is the closest documented family alternative when its order-code and packaging terms fit the purchasing plan; AD7482BST and AD7482BSTZ provide additional same-package family references for engineering review. All listed options share the core resolution, throughput, architecture, and package, so selection should focus on exact suffix semantics, temperature grade, lifecycle requirements, and availability. For systems needing more than one input channel, higher resolution, or a different serial interface, a different converter family is required rather than an order-code substitution. Validate analog settling, reference noise, clocking, and parallel-bus timing in the final PCB.

Perbandingan dengan Gantian

Parametr Produk Ini AD7482ASTZ AD7482BST AD7482BSTZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 48-pin LQFP 48-pin LQFP - same 48-pin LQFP - same 48-pin LQFP - same
Resolution 12 bit 12 bit 12 bit 12 bit
Maximum Throughput Rate 3 MSPS 3 MSPS 3 MSPS 3 MSPS
ADC Architecture Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC
Input Channels 1 channel 1 channel 1 channel 1 channel
Input Bandwidth 40 MHz 40 MHz 40 MHz 40 MHz
Interface Parallel Parallel Parallel Parallel
Supply Voltage 5 V maximum single supply 5 V maximum single supply 5 V maximum single supply 5 V maximum single supply
Pipeline Delay None None None None

Penyeberangsung Jelas

  • Documented same-package order-code substitution (vsAD7482ASTZ)
  • No-pipeline-delay conversion timing (vsAD7482BST)
  • High-speed input capability (vsAD7482BSTZ)
  • Flexible reference implementation (vsAD7482BSTZ)

Catatan Desain

Place the AD7482AST analog input and reference connections close to the device, and keep the parallel output routes away from the input and reference pins. Use a continuous ground plane with careful partitioning between analog and digital return currents. The 48-pin LQFP footprint requires attention to escape routing, but placing the converter before long parallel traces helps reduce loading and timing risk.

Treat the 40 MHz input bandwidth as a system requirement rather than an isolated converter specification. Select an input driver with adequate output impedance and verify that the source settles during the converter's acquisition interval. Short traces, a small return path, and appropriately placed bypass capacitors reduce distortion and conversion error. Use the manufacturer test circuit and recommended component values when matching performance at 3 MSPS.

Decouple the single 5 V supply close to the converter and route the current return directly to the device ground. Keep reference and analog-supply paths quiet because switching noise at the 2.5 V reference or input node can reduce conversion accuracy. The 90 mW full-power figure does not include every system-level loss, so validate the complete supply network for voltage margin and ripple under the intended acquisition duty cycle.

Do not confuse AD7482AST with a related order code without checking its exact suffix. The AD7482ASTZ, AD7482BST, and AD7482BSTZ variants appear in the same package family, but order-code semantics and temperature-grade requirements should be verified before substitution. Also avoid assuming that the 3 MSPS rate is usable if the source network cannot settle; timing margin must include the complete analog path.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance fields are not stated in the manufacturer or distributor listings associated with this product. The analog product category and surface-mount package do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD7482AST AD7482AST datasheet AD7482AST datasheet pdf AD7482AST pinout AD7482AST specifications AD7482AST 3 MSPS ADC AD7482AST 40 MHz bandwidth AD7482AST LQFP-48 AD7482AST equivalent AD7482AST replacement AD7482AST vs AD7482ASTZ AD7482AST price AD7482AST stock Analog Devices AD7482AST AD7482AST application circuit

Komponen dan Tanda berkaitan

Analog Devices AD7482AST AD7482ASTZ AD7482BST AD7482BSTZ AD7482 12-bit ADC successive-approximation ADC SAR ADC analog-to-digital converter data acquisition 3 MSPS 40 MHz input bandwidth parallel interface 2.5 V reference 5 V supply nap mode standby mode track-and-hold circuit offset shift 48-pin LQFP LQFP package surface-mount package industrial instrumentation test and measurement
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ