Analog Devices

AD9558BCPZ - 1.25 GHz Clock Multiplier | Analog Devices

MPN: AD9558BCPZ ✓ Aktif
3.3 V Vdss 230 mA Id 64-lead LFCSP-VQ, 9 mm × 9 mm Package 1.25 GHz Speed
MOQ: 1 |

AD9558BCPZ Ringkasan

The Analog Devices AD9558BCPZ is a low-loop-bandwidth clock multiplier and synchronization IC that provides jitter cleanup for optical networking, OTN, SONET, and SDH systems. It supports a maximum clock frequency of 1.25 GHz, accepts up to four external reference inputs, and is offered in a 64-lead LFCSP-VQ package measuring 9 mm by 9 mm.

A clock multiplier is a clock-and-timing IC that derives or translates a stable output clock from one or more reference sources. Its position in the hierarchy is clock multiplier → PLL-based timing device → clock and timing IC → integrated circuit. The AD9558 family supports synchronization across multiple inputs, making it useful where a system must tolerate reference switching, recover cleaner edges, or maintain phase relationship among distributed line-card clocks.

Programmable features include frequency translation and frame synchronization. The device uses an I2C or SPI control interface, provides one clock output according to the distributor listing, and operates from a 3.3 V supply with approximately 230 mA supply current. The low-loop-bandwidth architecture emphasizes jitter attenuation rather than merely multiplying a reference frequency, allowing accumulated phase noise from the upstream source to be reduced before the clock reaches sensitive line-card circuitry.

The AD9558 architecture accepts several external input clocks and selects or combines synchronization sources according to the configured operating mode. Its software-programmable functions support frequency translation and frame alignment, which simplify adaptation across multiservice line cards. The 1.25 GHz ceiling gives the device sufficient output bandwidth for high-speed synchronous optical networks while preserving the low-loop-bandwidth behavior required by communications infrastructure.

Typical applications include OTN and SONET/SDH line cards, Ethernet timing equipment, Stratum clock translators, frequency translators, and synchronized optical-network nodes. In these systems, the AD9558 can clean up a reference before distribution to line-card logic or support multiple input sources for protection and synchronization. It is most appropriate where clock quality, reference redundancy, and deterministic phase relationships matter more than the flexibility of a general-purpose CMOS oscillator.

PCB design should preserve high-speed signal integrity around the clock inputs and output. Keep clock traces short and away from noisy switching nodes, provide the decoupling network specified by the manufacturer, and use a controlled ground reference beneath the clock section. Because the package has a central exposed thermal pad, the layout must include thermal-via and copper-plane treatment appropriate for a 64-lead LFCSP-VQ footprint.

This product page combines the manufacturer's functional description, package and interface characteristics, distribution information, and practical networking guidance. It also distinguishes a directly comparable same-family device from the broader family ecosystem, helping engineers identify whether a footprint-compatible substitution is appropriate before committing to a redesign.

Pilihan pengganti yang segera untuk AD9558BCPZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD9558BCPZ (sama faktor bentuk dan kaki) — berbeza dalam Product Type.

Analog Devices
Product Type: Adaptive clock translator
Bandingkan Dengan AD9558BCPZ →

AD9557BCPZ-REEL7

✅ Masuk Drop-In
📦 64-lead LFCSP-VQ (9x9 mm)
Nominal maximum clock frequency is 1.25 GHz on both devices; differences in reference configuration, frame-sync behavior, and electrical limits require datasheet confirmation

📋 Alternatif rujukan (tidak dalam katalog)

AD9558BCPZ Spesifikasi

Product Type Clock multiplier and synchronization IC
Frekuensi Klock Maksimum 1.25 GHz
Number of External Inputs 4 inputs
Bilangan Output 1 output
Number of Multipliers/Dividers 1
Tegangan Pemberi Arus 3.3 V
Arus Pemberi Arus 230 mA
Control Interface I2C and SPI
Kemasan 64-lead LFCSP-VQ, 9 mm × 9 mm
Jenis Pemasangan Surface mount
Loop Architecture Low loop bandwidth
Primary Function Jitter cleanup and synchronization
Programmability Software-programmable frequency translation and frame synchronization
Input Selection Up to four external reference inputs
Network Standard Support OTN, SONET, and SDH
Ethernet Application Support Yes
Stratum Clock/Frequency Translation Supported
Status RoHS unknown
REACH Status unknown

Panduan Konfigurasi Pin AD9558BCPZ 64-lead lfcsp-vq, 9 mm × 9 mm

Konfigurasi pin untuk AD9558BCPZ (64-lead lfcsp-vq, 9 mm × 9 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 64-lead lfcsp-vq, 9 mm × 9 mm untuk AD9558BCPZ

Tiada data garisan pin yang diperoleh untuk AD9558BCPZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD9558BCPZ patut untuk 6 aplikasis: OTN Optical Transport Timing, SONET and SDH Line Cards, Synchronous Ethernet Equipment, Stratum Clock and Frequency Translation, Multiservice Line-Card Clocking, Optical Network Synchronization.

🌐

OTN Optical Transport Timing

The AD9558BCPZ fits OTN line cards that require a reference clock cleaned before it reaches high-speed optical transport logic. Its low-loop-bandwidth clock-multiplier architecture provides jitter cleanup while synchronization to up to four external inputs supports reference selection and resilience. The device operates up to 1.25 GHz and includes programmable frequency translation and frame synchronization, allowing one timing IC to support multiple card-level clock relationships. The 3.3 V supply and approximately 230 mA operating current simplify integration into modern communications equipment, although the design must preserve short clock traces and follow the manufacturer's decoupling and exposed-pad layout guidance.

🌐

SONET and SDH Line Cards

The AD9558BCPZ is suitable for SONET and SDH line cards where recovered or distributed references can contain timing noise. By synchronizing an output to as many as four external inputs, the device can support controlled source selection and system timing continuity. Its maximum 1.25 GHz operating frequency covers high-speed line-card clocking, while the low-loop-bandwidth multiplier emphasizes jitter attenuation. Programmable frequency translation and frame synchronization are especially useful when multiple tributary or cross-connect clock domains must maintain defined relationships. Board implementation should isolate the timing section from high-current switching circuitry and use a continuous ground reference to minimize clock-edge degradation.

🌐

Synchronous Ethernet Equipment

The AD9558BCPZ can support synchronous Ethernet equipment that needs a disciplined clock rather than a free-running oscillator. Its four-input synchronization architecture allows a system to work with multiple external references, while low-loop-bandwidth operation reduces the impact of reference jitter on downstream logic. The 1.25 GHz ceiling and single output provide adequate reach for line-card and aggregation-layer timing functions. Programmable translation and frame synchronization can reduce the number of separate timing components when several clocks require coordinated phase relationships. Engineers should verify the Ethernet PHY's exact reference requirement and ensure that the printed-circuit layout does not introduce excessive clock skew.

⚡

Stratum Clock and Frequency Translation

The AD9558BCPZ is specifically suited to Stratum clock and frequency-translation functions because it combines synchronization, low-loop-bandwidth jitter cleanup, and programmable translation in one clock-and-timing IC. Up to four external references can be accepted, while one output clock is generated according to the configured operating mode. The 1.25 GHz maximum frequency supports demanding communications infrastructure while the 3.3 V supply reduces the need for multiple rails. During implementation, define the required input frequency range, nominal translation ratio, loss-of-reference behavior, and frame alignment before programming the device; these operating conditions determine whether the clock remains compliant during network transitions.

🖥️

Multiservice Line-Card Clocking

The AD9558BCPZ targets multiservice line cards that must combine line-rate generation with stable synchronization. Its programmable frame synchronization and frequency translation functions allow clock relationships to be established across multiple card sections, while the low-loop-bandwidth multiplier helps suppress reference jitter before distribution. Four reference inputs increase design flexibility for redundant or multi-source clock architectures. The single output and 1.25 GHz frequency capability make the device appropriate where one high-quality derived clock is required per timing section. Layout should separate clock inputs from high-energy switching stages, preserve return paths beneath clock traces, and use the exposed thermal pad as both a heat-transfer and low-impedance ground feature.

🌐

Optical Network Synchronization

The AD9558BCPZ supports optical-network synchronization by producing a cleaned and synchronized output from external references. This capability is valuable when traffic traverses multiple network elements and each stage depends on predictable phase and jitter performance. The low-loop-bandwidth architecture, four available reference inputs, and programmable frequency translation make the part more specialized than a basic clock oscillator. Its 1.25 GHz operating ceiling supports high-speed synchronous systems, while I2C or SPI control permits integration into a line-card management processor. Designers should validate reference wander, failback behavior, and frame alignment under worst-case network conditions before using the device as the sole timing authority.

Ringkasan Produk Disebarkan

AD9508 Clock-generation component for line-card timing architecture Dipergunakan di: OTN Optical Transport Timing, SONET and SDH Line Cards, Synchronous Ethernet Equipment, Stratum Clock and Frequency Translation, Multiservice Line-Card Clocking, Optical Network Synchronization AD9557BCPZ-REEL7 Same-family timing-device comparison candidate Dipergunakan di: OTN Optical Transport Timing, SONET and SDH Line Cards, Synchronous Ethernet Equipment, Stratum Clock and Frequency Translation, Multiservice Line-Card Clocking, Optical Network Synchronization
What is the AD9558BCPZ and what does it do?
The AD9558BCPZ is a 1.25 GHz clock multiplier and synchronization IC designed for jitter cleanup in OTN, SONET, SDH, Ethernet, and multiservice line-card systems. According to the Analog Devices AD9558 product page, it generates an output clock synchronized to as many as four external inputs. Its low-loop-bandwidth architecture separates it from a simple frequency multiplier by emphasizing reference synchronization and jitter attenuation.
How many inputs and outputs does the AD9558BCPZ have?
The AD9558BCPZ supports up to four external clock inputs and provides one clock output. The manufacturer's product description identifies synchronization to up to four external inputs, while the distributor specification lists four inputs and one output. This arrangement is useful for systems requiring reference redundancy, input selection, or synchronization across multiple incoming clock domains.
What is the maximum frequency of the AD9558BCPZ?
The AD9558BCPZ supports a maximum clock frequency of 1.25 GHz. The Analog Devices product page identifies the AD9558 as a low-loop-bandwidth clock multiplier for synchronous optical networks, and the exact-order distributor listing identifies the AD9558BCPZ as a 1.25 GHz device. Confirm operating-mode and output-divider constraints against the manufacturer datasheet before designing the clock path.
Which interface is used to configure the AD9558BCPZ?
The AD9558BCPZ is configured through I2C or SPI. The device therefore supports both serial-control approaches commonly used by communication line cards, with I2C useful for compact multi-register configuration and SPI useful where higher update throughput or simpler point-to-point control is preferred. The manufacturer datasheet contains the register map and timing requirements for each supported interface.
What supply voltage and current does the AD9558BCPZ use?
The AD9558BCPZ operates from a 3.3 V supply and draws approximately 230 mA. The supply-voltage and supply-current values are listed in the device specifications. Power budgeting should include clock-output loading and neighboring circuit requirements rather than treating the 230 mA figure as the complete system-level supply demand.
Where can I download the AD9558BCPZ datasheet PDF?
The official AD9558 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9558.pdf. The manufacturer product page at https://www.analog.com/en/products/ad9558.html provides the product overview and links to technical documentation. Use the manufacturer PDF for the authoritative pin description, register map, electrical characteristics, and recommended application circuit.
Where can I find the AD9558BCPZ pinout and package details?
The AD9558BCPZ pinout is documented in the pin-description table of the official AD9558 datasheet. The exact-order part uses a 64-lead LFCSP-VQ package measuring 9 mm by 9 mm. Consult the pin-description table and land-pattern drawing when assigning every signal and when assigning PCB tracks; do not infer the 64-pin arrangement from another package variant.
What is the best drop-in replacement for the AD9558BCPZ?
The closest identified same-family comparison is the AD9557BCPZ-REEL7, which uses the same LFCSP-VQ package family, but the available comparison does not establish every pin function and operating parameter as identical. Confirm the AD9557 register compatibility, output frequency range, frame-sync behavior, and electrical limits in the Analog Devices datasheet before treating it as a production drop-in replacement.
Can AD9557BCPZ-REEL7 replace AD9558BCPZ?
AD9557BCPZ-REEL7 may serve as a same-family candidate because it appears in a direct comparison with the AD9558BCPZ and is identified as an Analog Devices LFCSP-VQ device. It should not be treated as a confirmed drop-in without checking pinout, register map, reference-input configuration, frame synchronization, and maximum output performance. A footprint match alone does not guarantee functional interchangeability.
AD9558BCPZ vs AD9557BCPZ-REEL7: which is better for a line-card clock?
Choose the AD9558BCPZ when the design specifically requires its documented multiservice line-card clock, jitter-cleanup, and frame-synchronization functions. Consider AD9557BCPZ-REEL7 only after verifying that its synchronization architecture and programming interface satisfy the line-card requirements. The available comparison identifies package-level similarity but does not quantify every functional difference needed for a definitive choice.
When should I choose the AD9558BCPZ over another clock generator?
The AD9558BCPZ is appropriate when the board needs synchronization to several external references, low-loop-bandwidth jitter cleanup, and programmable frequency translation or frame alignment. A conventional oscillator may be simpler for a single fixed-frequency clock, while a general-purpose PLL may offer more programmable frequency synthesis. The AD9558 is specifically oriented toward synchronized optical-network and line-card timing.
Is the AD9558BCPZ suitable for SONET, SDH, OTN, and Ethernet equipment?
Yes, the AD9558BCPZ is suitable for synchronization and jitter cleanup in OTN, SONET, SDH, Ethernet, Stratum-clock, and frequency-translation equipment. Its four-input synchronization capability and programmable frame-sync functions match the needs of multiservice line cards. Final suitability still depends on meeting the applicable line rate, jitter tolerance, reference standard, and recovery requirements of the target network.
Where can I buy the AD9558BCPZ and check current availability?
Use the Request a Quote form on this page to request current AD9558BCPZ availability, lead time, and order quantities. Quote handling is appropriate because timing inventory and lifecycle allocation can change, and the part is specialized for high-speed optical-network line cards. Provide the required package, quantity, date code, and inspection requirements when submitting the request.
What is the price of the AD9558BCPZ?
The current AD9558BCPZ price is shown through the Request a Quote workflow on this page rather than as a static figure. Submit your requested quantity and any date-code or inspection requirements for a current quote. This approach prevents an outdated timing price from being mistaken for the final orderable commercial value.
What is the lead time and minimum order quantity for the AD9558BCPZ?
Current lead time and minimum order quantity should be obtained through the Request a Quote form on this page. The AD9558BCPZ is a specialized 64-lead clock-and-timing IC for optical-network equipment, so factory allocation and assembly requirements may affect availability. Include the production schedule and annual usage in the request to obtain an actionable schedule.
What are the key specifications engineers should know about the AD9558BCPZ?
The key AD9558BCPZ specifications are a 1.25 GHz maximum clock frequency, four external synchronization inputs, one output, a 3.3 V supply, approximately 230 mA supply current, and I2C or SPI configuration. The device is packaged in a 64-lead 9 mm × 9 mm LFCSP-VQ package and supports low-loop-bandwidth jitter cleanup, frequency translation, and frame synchronization.

Data referensi kejuruteraan untuk AD9558BCPZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD9558BCPZ for communications equipment that requires disciplined clock output, low-loop-bandwidth jitter cleanup, synchronization to multiple references, and programmable frequency translation or frame alignment. It is particularly appropriate for OTN, SONET, SDH, Ethernet, and multiservice line-card designs. AD9557BCPZ-REEL7 is the closest identified same-family candidate and offers a promising footprint-level replacement path, but production substitution requires verification of pin functions, register compatibility, reference handling, and operating limits. For a system requiring only one fixed-frequency clock and no synchronization architecture, a simpler oscillator may reduce complexity. For applications requiring extensive frequency synthesis rather than reference cleanup and frame alignment, a programmable PLL may be a better functional fit.

Perbandingan dengan Gantian

Parametr Produk Ini AD9557BCPZ-REEL7
Brand Analog Devices Analog Devices
Package 64-lead LFCSP-VQ (9x9 mm) 64-lead LFCSP-VQ (9x9 mm)
Maximum Clock Frequency 1.25 GHz 1.25 GHz

Penyeberangsung Jelas

  • Purpose-built synchronization for communications line cards (vsAD9557BCPZ-REEL7)
  • Multi-reference synchronization capability (vsAD9557BCPZ-REEL7)
  • Broad communications-clock functionality (vsAD9557BCPZ-REEL7)

Catatan Desain

Place the AD9558BCPZ close to the sources and loads of its clock signals. Route the 1.25 GHz-capable clock paths as controlled-impedance, short traces, and avoid routing them beneath switching-regulator power stages or digital buses with high edge rates. Provide a continuous ground plane beneath the clock circuitry so return-current paths remain predictable.

Budget the approximately 230 mA device current from a stable 3.3 V rail. Follow the manufacturer guidance for input, output, and supply decoupling capacitors, including capacitor type, voltage rating, and placement. Keep the supply network quiet because reference-cleaning performance cannot compensate for significant supply noise or voltage variation injected into the clock synthesizer.

The 64-lead LFCSP-VQ has an exposed thermal pad that must be connected to the ground plane according to the land pattern. Use multiple thermal vias and uninterrupted copper beneath the package to spread heat and maintain a low-impedance return path. Verify junction temperature across the highest expected clock activity, supply voltage, and ambient temperature rather than relying on package exposure alone.

Do not treat the 1.25 GHz figure as a universal operating point. Confirm the permitted input range, multiplier configuration, divider settings, output-drive mode, and reference-source requirements in the AD9558 datasheet. Also verify software behavior for loss of reference, reference switching, and frame synchronization before deploying the part in a production line-card design.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page, official datasheet, and distributor listings did not provide explicit compliance values for this exact orderable MPN.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD9558BCPZ datasheet AD9558BCPZ pinout AD9558BCPZ datasheet pdf AD9558BCPZ equivalent AD9558BCPZ replacement AD9558BCPZ cross reference AD9558BCPZ vs AD9557BCPZ-REEL7 AD9558BCPZ application circuit AD9558BCPZ 1.25 GHz clock multiplier Analog Devices AD9558BCPZ AD9558BCPZ price AD9558BCPZ stock AD9558BCPZ 64 LFCSP AD9558BCPZ OTN SONET SDH AD9558BCPZ I2C SPI

Komponen dan Tanda berkaitan

Analog Devices AD9558BCPZ AD9557BCPZ-REEL7 AD9508 clock multiplier clock synthesizer PLL clock and timing IC integrated circuit semiconductor jitter cleanup frequency translation frame synchronization low loop bandwidth OTN SONET SDH synchronous Ethernet Stratum clock I2C SPI 1.25 GHz 3.3 V supply LFCSP-VQ QFN family surface-mount package
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ