AD9558BCPZ - 1.25 GHz Clock Multiplier | Analog Devices
料号: AD9558BCPZ ✓ 量产中AD9558BCPZ 概述
A clock multiplier is a clock-and-timing IC that derives or translates a stable output clock from one or more reference sources. Its position in the hierarchy is clock multiplier → PLL-based timing device → clock and timing IC → integrated circuit. The AD9558 family supports synchronization across multiple inputs, making it useful where a system must tolerate reference switching, recover cleaner edges, or maintain phase relationship among distributed line-card clocks.
Programmable features include frequency translation and frame synchronization. The device uses an I2C or SPI control interface, provides one clock output according to the distributor listing, and operates from a 3.3 V supply with approximately 230 mA supply current. The low-loop-bandwidth architecture emphasizes jitter attenuation rather than merely multiplying a reference frequency, allowing accumulated phase noise from the upstream source to be reduced before the clock reaches sensitive line-card circuitry.
The AD9558 architecture accepts several external input clocks and selects or combines synchronization sources according to the configured operating mode. Its software-programmable functions support frequency translation and frame alignment, which simplify adaptation across multiservice line cards. The 1.25 GHz ceiling gives the device sufficient output bandwidth for high-speed synchronous optical networks while preserving the low-loop-bandwidth behavior required by communications infrastructure.
Typical applications include OTN and SONET/SDH line cards, Ethernet timing equipment, Stratum clock translators, frequency translators, and synchronized optical-network nodes. In these systems, the AD9558 can clean up a reference before distribution to line-card logic or support multiple input sources for protection and synchronization. It is most appropriate where clock quality, reference redundancy, and deterministic phase relationships matter more than the flexibility of a general-purpose CMOS oscillator.
PCB design should preserve high-speed signal integrity around the clock inputs and output. Keep clock traces short and away from noisy switching nodes, provide the decoupling network specified by the manufacturer, and use a controlled ground reference beneath the clock section. Because the package has a central exposed thermal pad, the layout must include thermal-via and copper-plane treatment appropriate for a 64-lead LFCSP-VQ footprint.
This product page combines the manufacturer's functional description, package and interface characteristics, distribution information, and practical networking guidance. It also distinguishes a directly comparable same-family device from the broader family ecosystem, helping engineers identify whether a footprint-compatible substitution is appropriate before committing to a redesign.
直接替换替代料: AD9558BCPZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD9558BCPZ (相同外形与封装尺寸) ——差异在于 Product Type.
AD9557BCPZ-REEL7
✅ 直接替换📋 参考替代料(不在目录中)
AD9558BCPZ 规格参数
| Product Type | Clock multiplier and synchronization IC |
| 最大时钟频率 | 1.25 GHz |
| Number of External Inputs | 4 inputs |
| 输出数量 | 1 output |
| Number of Multipliers/Dividers | 1 |
| 电源电压 | 3.3 V |
| 电源电流 | 230 mA |
| Control Interface | I2C and SPI |
| 封装 | 64-lead LFCSP-VQ, 9 mm × 9 mm |
| 安装类型 | Surface mount |
| Loop Architecture | Low loop bandwidth |
| Primary Function | Jitter cleanup and synchronization |
| Programmability | Software-programmable frequency translation and frame synchronization |
| Input Selection | Up to four external reference inputs |
| Network Standard Support | OTN, SONET, and SDH |
| Ethernet Application Support | Yes |
| Stratum Clock/Frequency Translation | Supported |
| RoHS 状态 | unknown |
| REACH Status | unknown |
AD9558BCPZ 64-lead lfcsp-vq, 9 mm × 9 mm 引脚配置指南
AD9558BCPZ(64-lead lfcsp-vq, 9 mm × 9 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: AD9558BCPZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD9558BCPZ 适用于 6 应用s: OTN Optical Transport Timing, SONET and SDH Line Cards, Synchronous Ethernet Equipment, Stratum Clock and Frequency Translation, Multiservice Line-Card Clocking, Optical Network Synchronization.
OTN Optical Transport Timing
The AD9558BCPZ fits OTN line cards that require a reference clock cleaned before it reaches high-speed optical transport logic. Its low-loop-bandwidth clock-multiplier architecture provides jitter cleanup while synchronization to up to four external inputs supports reference selection and resilience. The device operates up to 1.25 GHz and includes programmable frequency translation and frame synchronization, allowing one timing IC to support multiple card-level clock relationships. The 3.3 V supply and approximately 230 mA operating current simplify integration into modern communications equipment, although the design must preserve short clock traces and follow the manufacturer's decoupling and exposed-pad layout guidance.
推荐
SONET and SDH Line Cards
The AD9558BCPZ is suitable for SONET and SDH line cards where recovered or distributed references can contain timing noise. By synchronizing an output to as many as four external inputs, the device can support controlled source selection and system timing continuity. Its maximum 1.25 GHz operating frequency covers high-speed line-card clocking, while the low-loop-bandwidth multiplier emphasizes jitter attenuation. Programmable frequency translation and frame synchronization are especially useful when multiple tributary or cross-connect clock domains must maintain defined relationships. Board implementation should isolate the timing section from high-current switching circuitry and use a continuous ground reference to minimize clock-edge degradation.
推荐
Synchronous Ethernet Equipment
The AD9558BCPZ can support synchronous Ethernet equipment that needs a disciplined clock rather than a free-running oscillator. Its four-input synchronization architecture allows a system to work with multiple external references, while low-loop-bandwidth operation reduces the impact of reference jitter on downstream logic. The 1.25 GHz ceiling and single output provide adequate reach for line-card and aggregation-layer timing functions. Programmable translation and frame synchronization can reduce the number of separate timing components when several clocks require coordinated phase relationships. Engineers should verify the Ethernet PHY's exact reference requirement and ensure that the printed-circuit layout does not introduce excessive clock skew.
推荐
Stratum Clock and Frequency Translation
The AD9558BCPZ is specifically suited to Stratum clock and frequency-translation functions because it combines synchronization, low-loop-bandwidth jitter cleanup, and programmable translation in one clock-and-timing IC. Up to four external references can be accepted, while one output clock is generated according to the configured operating mode. The 1.25 GHz maximum frequency supports demanding communications infrastructure while the 3.3 V supply reduces the need for multiple rails. During implementation, define the required input frequency range, nominal translation ratio, loss-of-reference behavior, and frame alignment before programming the device; these operating conditions determine whether the clock remains compliant during network transitions.
推荐
Multiservice Line-Card Clocking
The AD9558BCPZ targets multiservice line cards that must combine line-rate generation with stable synchronization. Its programmable frame synchronization and frequency translation functions allow clock relationships to be established across multiple card sections, while the low-loop-bandwidth multiplier helps suppress reference jitter before distribution. Four reference inputs increase design flexibility for redundant or multi-source clock architectures. The single output and 1.25 GHz frequency capability make the device appropriate where one high-quality derived clock is required per timing section. Layout should separate clock inputs from high-energy switching stages, preserve return paths beneath clock traces, and use the exposed thermal pad as both a heat-transfer and low-impedance ground feature.
推荐
Optical Network Synchronization
The AD9558BCPZ supports optical-network synchronization by producing a cleaned and synchronized output from external references. This capability is valuable when traffic traverses multiple network elements and each stage depends on predictable phase and jitter performance. The low-loop-bandwidth architecture, four available reference inputs, and programmable frequency translation make the part more specialized than a basic clock oscillator. Its 1.25 GHz operating ceiling supports high-speed synchronous systems, while I2C or SPI control permits integration into a line-card management processor. Designers should validate reference wander, failback behavior, and frame alignment under worst-case network conditions before using the device as the sole timing authority.
推荐
推荐产品汇总
工程参考数据: AD9558BCPZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD9557BCPZ-REEL7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 64-lead LFCSP-VQ (9x9 mm) | 64-lead LFCSP-VQ (9x9 mm) |
| Maximum Clock Frequency | 1.25 GHz | 1.25 GHz |
关键差异点
- Purpose-built synchronization for communications line cards (对比 AD9557BCPZ-REEL7)
- Multi-reference synchronization capability (对比 AD9557BCPZ-REEL7)
- Broad communications-clock functionality (对比 AD9557BCPZ-REEL7)
设计说明
Place the AD9558BCPZ close to the sources and loads of its clock signals. Route the 1.25 GHz-capable clock paths as controlled-impedance, short traces, and avoid routing them beneath switching-regulator power stages or digital buses with high edge rates. Provide a continuous ground plane beneath the clock circuitry so return-current paths remain predictable.
Budget the approximately 230 mA device current from a stable 3.3 V rail. Follow the manufacturer guidance for input, output, and supply decoupling capacitors, including capacitor type, voltage rating, and placement. Keep the supply network quiet because reference-cleaning performance cannot compensate for significant supply noise or voltage variation injected into the clock synthesizer.
The 64-lead LFCSP-VQ has an exposed thermal pad that must be connected to the ground plane according to the land pattern. Use multiple thermal vias and uninterrupted copper beneath the package to spread heat and maintain a low-impedance return path. Verify junction temperature across the highest expected clock activity, supply voltage, and ambient temperature rather than relying on package exposure alone.
Do not treat the 1.25 GHz figure as a universal operating point. Confirm the permitted input range, multiplier configuration, divider settings, output-drive mode, and reference-source requirements in the AD9558 datasheet. Also verify software behavior for loss of reference, reference switching, and frame synchronization before deploying the part in a production line-card design.
合规信息
The manufacturer product page, official datasheet, and distributor listings did not provide explicit compliance values for this exact orderable MPN.