Analog Devices

AD96687BR - 2.5 ns Dual ECL Comparator | Analog Devices

MPN: AD96687BR ✗ Akhir Hayat
-5.2 V Vdss 16-lead SOIC Package
MOQ: 1 |

AD96687BR Ringkasan

Analog Devices AD96687BR is an ultrafast dual voltage comparator featuring 2.5 ns propagation delay, 50 ps propagation delay dispersion, and ECL-compatible operation from a -5.2 V supply in a 16-lead SOIC package. The device contains two high-speed comparators with complementary, latched, open-emitter outputs, making it suitable for precision threshold detection and high-speed trigger systems.

A voltage comparator is a semiconductor integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The AD96687 belongs to the comparator hierarchy within amplifier and interface ICs. Its ECL output structure supports very fast decision times while retaining the familiar emitter-coupled logic voltage convention used in demanding high-speed systems.

Principal advantages include the 2.5 ns propagation delay, 50 ps delay dispersion, and low power consumption of 118 mW per comparator. The open-emitter outputs provide flexible termination and wired-connection options, while the complementary outputs allow one package to provide both polarities of a threshold decision. The manufacturer identifies high-speed triggers, high-speed line receivers, and threshold detectors as principal uses for this comparator family.

The AD96685 and AD96687 share the same ultrafast ECL architecture. The AD96685 provides one comparator, while the AD96687 provides two independent comparators in one package. Propagation delay dispersion measures output-timing variation as overdrive changes; the 50 ps value helps designers evaluate timing consistency across a range of input overdrive conditions. Open-emitter outputs are intended for termination through 50 ohm resistors to -2.0 V or an equivalent ECL termination arrangement.

Typical applications include high-speed triggers, pulse-width and threshold detection circuits, high-speed line receivers, clock or pulse qualification, and instrumentation requiring nanosecond-scale decision-making. The dual configuration can reduce component count when a board requires two closely related comparison functions. Each output still requires correct power-supply decoupling and a suitable ECL termination network.

Layout is critical because propagation delays of 2.5 ns leave little margin for excessive trace length, impedance discontinuity, or reflection. The manufacturer recommends MicroStrip or Stripline techniques when ECL signals must travel more than a few centimeters. Keep comparator inputs and output termination paths short, use controlled-impedance routing where applicable, and account for the negative supply and ECL reference network in return-current planning.

This product page combines the manufacturer’s ordering guidance with a practical view of timing, termination, application selection, and design trade-offs. It also highlights the family distinction between the single AD96685 and dual AD96687, helping engineers evaluate whether one or two comparator channels are required before beginning layout work.

Pilihan pengganti yang segera untuk AD96687BR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

AD96687BRZ

✅ Masuk Drop-In
📦 16-lead SOIC
Same dual-comparator family, 16-lead SOIC, 2.5 ns propagation delay, and ECL open-emitter architecture; ordering suffix and lifecycle qualification should be checked

📋 Alternatif rujukan (tidak dalam katalog)

AD96687BR Penilaian maksimum & Ciri-ciri Elektrik

Comparator Type Dual voltage comparator
Propagation Delay 2.5 ns
Propagation Delay Dispersion 50 ps
Power Consumption 118 mW per comparator
Logic Compatibility ECL
Tegangan Pemberi Arus -5.2 V
Konfigurasi Output Complementary, latched, open-emitter
Number of Channels 2 channels
Target Package 16-lead SOIC
Family Package Options DIP, SOIC, and PLCC
Recommended Output Termination 50 ohm to -2.0 V or equivalent ECL termination
Status RoHS unknown
REACH Status unknown

Panduan Konfigurasi Pin AD96687BR dip, soic, and plcc

Konfigurasi pin untuk AD96687BR (dip, soic, and plcc pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai dip, soic, and plcc untuk AD96687BR

Tiada data garisan pin yang diperoleh untuk AD96687BR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD96687BR patut untuk 6 aplikasis: High-Speed Trigger Circuits, High-Speed Line Receivers, Pulse-Width Threshold Detection, Clock and Pulse Qualification, Instrumentation Threshold Detectors, High-Speed Data Capture Qualification.

⚡

High-Speed Trigger Circuits

The AD96687BR fits high-speed trigger generation because each channel can make a comparison with a nominal 2.5 ns propagation delay. Two complementary channels can be used to define both sides of a threshold event without duplicating a single-channel package. The Analog Devices AD96685/AD96687 data sheet (Rev. D) identifies high-speed triggers as a primary application. Engineers should route both analog inputs symmetrically, terminate the open-emitter outputs with the specified ECL network, and keep the decision path short so propagation and reflection do not undermine edge timing.

🌐

High-Speed Line Receivers

The AD96687BR can support line-receiver functions where a received signal must be converted into a rapid logic decision. Its 2.5 ns propagation delay and 50 ps propagation delay dispersion are the central timing characteristics for this use. The manufacturer specifically lists high-speed line receivers as an application for the AD96685/AD96687 family. The open-emitter outputs require suitable ECL termination, and traces longer than a few centimeters may require MicroStrip or Stripline routing to preserve transition quality and limit ringing.

📺

Pulse-Width Threshold Detection

The AD96687BR is suited to pulse-width and threshold detection because two comparator channels can monitor related edges with a nominal 2.5 ns response time. Complementary outputs also provide useful polarity options for downstream ECL logic. The manufacturer identifies threshold detection as an application for this family. For reliable measurements, the input network should present low, repeatable loading, the comparator supply should be properly decoupled, and the ECL outputs should use the prescribed termination to avoid false transitions caused by reflection.

🖥️

Clock and Pulse Qualification

The AD96687BR can qualify clock or pulse signals in high-speed digital systems where a clean decision must occur in nanoseconds. Its 2.5 ns propagation delay provides a defined response interval, while 50 ps dispersion characterizes timing variation across different overdrive conditions. The dual complementary configuration is useful when both rising and falling thresholds or two related pulse conditions must be evaluated. Keep the source and reference paths short, maintain controlled return paths, and follow the manufacturer’s ECL termination recommendation to preserve edge fidelity.

🧩

Instrumentation Threshold Detectors

The AD96687BR is useful in instrumentation that requires rapid threshold decisions for sensor, test, or measurement signals. The dual architecture can compare two independent thresholds in a compact 16-lead SOIC, reducing the number of separate comparator packages. Its 2.5 ns delay is much shorter than the response time of many measurement systems, although the overall system result may be limited by noise, input bandwidth, and post-processing. Use symmetrical input routing, stable references, proper supply bypassing, and correctly terminated ECL outputs to avoid adding errors to the measurement chain.

🖥️

High-Speed Data Capture Qualification

The AD96687BR can qualify captured data or control a fast sampling sequence when the system must recognize an input threshold with a nominal 2.5 ns delay. Two channels can monitor complementary limits or separate event conditions. This use requires careful attention to transmission-line effects because a fast comparator does not eliminate delays caused by long traces, mismatched terminations, or shared return-current paths. Follow the manufacturer’s guidance for MicroStrip or Stripline routing when ECL signals must extend beyond a few centimeters, and validate timing at the system level.

Ringkasan Produk Disebarkan

AD96685 Single-channel member of the same ultrafast ECL comparator family Dipergunakan di: High-Speed Trigger Circuits, High-Speed Line Receivers, Pulse-Width Threshold Detection, Clock and Pulse Qualification, Instrumentation Threshold Detectors, High-Speed Data Capture Qualification AD96687BRZ Same dual-comparator configuration in a 16-lead SOIC ordering option Dipergunakan di: High-Speed Trigger Circuits, High-Speed Line Receivers, Pulse-Width Threshold Detection, Clock and Pulse Qualification, Instrumentation Threshold Detectors, High-Speed Data Capture Qualification
What is the propagation delay of the AD96687BR?
The AD96687BR has a 2.5 ns propagation delay. According to the Analog Devices AD96685/AD96687 data sheet (Rev. D), the AD96687 is a dual ultrafast voltage comparator, with two comparator channels in one package. This timing suits high-speed trigger, threshold-detection, and line-receiver functions where the output must follow an input crossing with minimal delay.
What is propagation delay dispersion in the AD96687?
The AD96687 has 50 ps propagation delay dispersion. The Analog Devices AD96685/AD96687 data sheet (Rev. D) describes this characteristic as the difference in propagation delay under different overdrive conditions. It is important in high-speed systems because a comparator can switch quickly but still produce different delays as the magnitude of the input transition changes.
Where can I download the AD96687BR datasheet PDF?
The official AD96687BR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD96685_96687.pdf. It covers the AD96685 and AD96687 comparator family, including the 2.5 ns propagation delay, 50 ps delay dispersion, ECL supply arrangement, output termination, and package options. Use the manufacturer’s pin-description table when assigning PCB connections.
Where can I find the AD96687BR pinout?
The AD96687BR pin assignments are identified in the pin-description table of the official Analog Devices AD96685/AD96687 data sheet (Rev. D). The part is offered in a 16-lead SOIC package, and its ECL power and output-termination requirements must be followed exactly. Request the current package drawing and pin table when preparing a new layout.
What is the difference between the AD96685 and AD96687?
The AD96685 is a single ultrafast comparator, while the AD96687 is a dual comparator in one package. According to the Analog Devices AD96685/AD96687 data sheet (Rev. D), both provide 2.5 ns propagation delay and 50 ps propagation delay dispersion. Choose the AD96687 when two comparison channels are required and the dual 16-lead SOIC implementation is acceptable.
What power supply does the AD96687BR require?
The AD96687BR is designed for operation from a -5.2 V supply. The Analog Devices AD96685/AD96687 data sheet (Rev. D) identifies ECL compatibility and describes termination of the open-emitter outputs through 50 ohm resistors to -2.0 V or an equivalent ECL termination. Decoupling and return-current layout are essential at this speed.
How should the AD96687BR outputs be terminated?
The AD96687BR open-emitter outputs should be terminated through 50 ohm resistors to -2.0 V, or through an equivalent ECL termination arrangement. This guidance comes from the Analog Devices AD96685/AD96687 data sheet (Rev. D). Correct termination establishes the required ECL levels and suppresses ringing that could otherwise degrade the device’s nominal 2.5 ns response.
Can the AD96687BR be used as a high-speed line receiver?
Yes, the AD96687 is identified by Analog Devices for high-speed line-receiver applications. Its 2.5 ns propagation delay and 50 ps delay dispersion suit rapid threshold decisions, while the dual configuration provides two complementary comparison channels. The input and output paths must be short, and the ECL outputs require proper 50 ohm termination.
What applications are suitable for the AD96687BR?
The AD96687BR is suitable for high-speed triggers, high-speed line receivers, and threshold detectors. The Analog Devices AD96685/AD96687 data sheet (Rev. D) highlights these applications, while the dual architecture supports two complementary, latched comparisons in one 16-lead SOIC. It is most appropriate where nanosecond-scale response and ECL-compatible signaling justify careful high-speed layout.
What can replace the AD96687BR?
The AD96687BRZ is the closest identified replacement because it is the same Analog Devices dual comparator in a 16-lead SOIC package with the same 2.5 ns propagation delay. Other suffixes may represent packaging or ordering differences and should not be treated as distinct engineering alternatives. Confirm pinout, temperature grade, lifecycle status, and ECL termination requirements before releasing a replacement to production.
Is the AD96687BR suitable for a pulse-width detector?
The AD96687BR is suitable for pulse-width and threshold detection when nanosecond-scale decision time is required. Its 2.5 ns propagation delay and dual complementary outputs allow two related threshold events to be monitored with one package. The open-emitter ECL outputs require the specified termination, and the analog input traces must be designed to avoid added delay or noise pickup.
When should I choose the AD96687BR instead of the AD96685?
Choose the AD96687BR when the design requires two high-speed comparison channels and can use a 16-lead SOIC. Choose the AD96685 when only one comparator channel is needed and a smaller implementation is preferred. Both belong to the same ultrafast ECL comparator family and are characterized by 2.5 ns propagation delay and 50 ps delay dispersion.
Is the AD96687BR still recommended for new designs?
Analog Devices marks AD96687 as not recommended for new designs, so new production programs should first confirm whether the timing and ECL functions require a current alternative. Existing systems can evaluate the BRZ ordering option for continuity after checking pinout, temperature grade, and lifecycle status. Request a lifecycle and sourcing review through the Request a Quote form on this page.
Where can I buy the AD96687BR and check its lead time?
Use the Request a Quote form on this page to request AD96687BR pricing, stock confirmation, minimum order quantity, and current lead time. Because the manufacturer lists the family as not recommended for new designs, obtain a written lifecycle and availability confirmation before committing a new build. The form routes the request without relying on a static price or inventory statement.
How do I preserve AD96687BR timing performance on a PCB?
Preserve the AD96687BR’s 2.5 ns timing performance by keeping input and output paths short, using suitable ECL terminations, and controlling return currents. The Analog Devices AD96685/AD96687 data sheet (Rev. D) recommends MicroStrip or Stripline techniques when signals must travel more than a few centimeters. Validate the complete layout with signal-integrity measurements because reflections can degrade effective delay.

Data referensi kejuruteraan untuk AD96687BR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD96687BR when an existing high-speed ECL design needs two comparator channels in one 16-lead SOIC. Its 2.5 ns propagation delay, complementary latched outputs, and 50 ps delay dispersion are useful for triggers, line receivers, and threshold detectors. Choose the AD96685 when only one channel is needed and a single-comparator package is preferable. The AD96687BRZ is the closest identified same-package ordering option, but confirm pinout, temperature grade, lifecycle status, and supply sourcing before substitution. Because Analog Devices marks the AD96687 family as not recommended for new designs, new programs should compare current ultrafast comparator options rather than adopting this part solely for convenience. Existing systems should preserve the established ECL termination and controlled-impedance layout because changing suppliers does not remove the high-speed routing requirements.

Perbandingan dengan Gantian

Parametr Produk Ini AD96687BRZ
Package 16-lead SOIC 16-lead SOIC
Brand Analog Devices Analog Devices
Comparator Configuration Dual voltage comparator Dual voltage comparator
Propagation Delay 2.5 ns 2.5 ns
Propagation Delay Dispersion 50 ps 50 ps
Power Consumption 118 mW per comparator 118 mW per comparator
Supply Voltage -5.2 V -5.2 V
Logic Compatibility ECL ECL
Output Configuration Complementary, latched, open-emitter Complementary, latched, open-emitter
Recommended Termination 50 ohm to -2.0 V or equivalent ECL termination 50 ohm to -2.0 V or equivalent ECL termination

Penyeberangsung Jelas

  • Provides two high-speed comparison channels in one package (vsAD96685)
  • Uses complementary latched open-emitter ECL outputs (vsAD96685)
  • Maintains low propagation delay dispersion (vsAD96685)

Catatan Desain

Keep the AD96687BR input and output paths short and use the specified 50 ohm ECL termination. The manufacturer recommends MicroStrip or Stripline techniques when signals must travel more than a few centimeters. Reflection caused by an incorrect termination can create false transitions and obscure the device’s nominal 2.5 ns decision time.

Route the two comparator channels symmetrically when they monitor related signals. Maintain a continuous return path beneath or adjacent to high-speed traces, decouple the -5.2 V supply close to the device, and avoid sharing narrow return-current paths between ECL outputs. These practices reduce coupling and ground bounce that can disturb threshold decisions.

Do not treat the 2.5 ns propagation delay as the complete system response time. Input-network delay, comparator overdrive, propagation delay dispersion, output rise and fall time, trace length, and termination all affect the observed edge position. Test the complete circuit with realistic input overdrive and verify timing at the receiving device.

Provide a stable -5.2 V supply and the manufacturer’s ECL termination arrangement. Place supply bypassing close to the package and check the supply for adequate current headroom and low transient noise. Because the open-emitter outputs are not intended to drive long unterminated routes, verify the complete output network before operation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page identifies AD96687 as not recommended for new designs. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this ordering option.

Pencarian Berhubungan

AD96687BR datasheet AD96687BR datasheet pdf AD96687BR pinout AD96687BR equivalent AD96687BR replacement AD96687BR cross reference AD96687BR price AD96687BR stock Analog Devices AD96687BR AD96687BR vs AD96685 AD96687 2.5 ns ECL comparator AD96687BR high speed trigger AD96687BR threshold detector AD96687BR 16-SOIC footprint AD96687BR ECL termination

Komponen dan Tanda berkaitan

Analog Devices AD96687BR AD96687BRZ AD96685 AD96687 Dual voltage comparator Voltage comparator Amplifier IC Semiconductor ECL Emitter-coupled logic Open-emitter output Complementary output Latched output Propagation delay Propagation delay dispersion Threshold detector High-speed trigger High-speed line receiver 16-lead SOIC SOIC package Surface-mount package 50 ohm termination MicroStrip Stripline -5.2 V supply
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ