Analog Devices

ADF4007BCPZ-RL7 - 7.5 GHz Integer-N PLL Synthesizer | Analog Devices

MPN: ADF4007BCPZ-RL7 ✓ Aktif
3.3 V Vdss 20-lead WFQFN exposed-pad CSP Package 7.5 GHz Speed
MOQ: 1 |

ADF4007BCPZ-RL7 Ringkasan

The Analog Devices ADF4007BCPZ-RL7 is a high-frequency divider and integer-N phase-locked-loop synthesizer with RF operation up to 7.5 GHz, a maximum phase-frequency-detector frequency of 120 MHz, and a 20-lead WFQFN exposed-pad package. It accepts a CMOS reference input and provides selectable divide ratios of 8, 16, 32, and 64 through two external control pins.

A frequency synthesizer is a timing component that uses a phase-locked loop to generate, divide, or regulate a frequency referenced to a stable source. The ADF4007 combines a low-noise digital phase-frequency detector, precision charge pump, and programmable divider or prescaler. Within the clock and timing IC hierarchy, it is an integer-N PLL synthesizer designed for communications equipment requiring accurate frequency translation or clock generation.

The device supports a 3.3 V power supply and a separate charge-pump supply that permits an extended tuning-voltage range. External control pins select among four prescaler-related divide settings, while the reference input establishes the synthesizer's frequency accuracy and stability. These functions make the part suitable for RF signal chains where a fixed reference must control a high-frequency local oscillator.

Technical performance depends on the reference signal, loop filter, charge-pump settings, and output frequency. The Analog Devices ADF4007 data sheet describes a typical circuit using the specified loop-filter components with ADIsimPLL, producing phase noise of -100 dBc/Hz at a 10 kHz carrier offset. The loop filter also attenuates spurs to below -90 dBc in that typical implementation.

Typical applications include wireless transceiver local oscillators, microwave down-converter and up-converter reference planes, instrument clocks, and communications test equipment. An evaluation platform is available as EVAL-ADF4007, with SMA connections for the reference and RF paths and hardware selection of the 8, 16, 32, or 64 divide ratios for rapid PLL characterization.

A successful design must preserve clean reference routing, provide suitable charge-pump and loop-filter networks, and keep the RF output path away from high-current switching nodes. The exposed pad should be connected to the ground plane according to the manufacturer's land-pattern and thermal-layout guidance because it provides both electrical return and heat-dissipation paths.

This product page combines the manufacturer's functional specifications, pricing structure, drop-in alternatives, and application-focused engineering guidance to support faster component selection and implementation of the ADF4007BCPZ-RL7 in communications clock and frequency-synthesis systems.

Pilihan pengganti yang segera untuk ADF4007BCPZ-RL7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADF4007BCPZ-RL7 (sama faktor bentuk dan kaki) — berbeza dalam Package, Typical Phase Noise, Typical Spur Level, Charge Pump Supply, Reference Divider Ratio.

Analog Devices
Package: 20-lead LFCSP with exposed pad
Typical Phase Noise: -100 dBc/Hz at 10 kHz offset
Typical Spur Level: Below -90 dBc
Bandingkan Dengan ADF4007BCPZ-RL7 →
Analog Devices
Package: 20-LFCSP with exposed pad
Typical Phase Noise: -100 dBc/Hz at 10 kHz offset
Typical Spur Level: Below -90 dBc
Bandingkan Dengan ADF4007BCPZ-RL7 →

ADF4007BCPZ

✅ Masuk Drop-In
Analog Devices
📦 20-lead WFQFN exposed-pad CSP
20 MHz to 7.5 GHz · 7.5 GHz · 120 MHz · 2.7 V to 3.3 V · 15 mA · 240 MHz · 2 (fixed) · -100 dBc/Hz at 10 kHz offset

Hubungi untuk harga

Lihat Datasheet →

ADF4007BCPZ-RL7 Spesifikasi

Device Type Integer-N PLL frequency synthesizer
Maximum RF Frequency 7.5 GHz
Maximum PFD Frequency 120 MHz
Reference Input 20 MHz CMOS
Tegangan Pemberi Arus 3.3 V
Charge Pump Supply Separate VP supply; extended tuning-voltage range
Divider Settings 8, 16, 32, or 64
Divider Control Two external control pins
Input-to-Output Ratio 2:1
Input Logic CMOS
Jenis Output Clock
Phase-Locked Loop Yes
Number of Circuits 1
Gambaran Suhu Operasi -40 °C to +85 °C
Kemasan 20-lead WFQFN exposed-pad CSP
Terminal Count 20 terminals
Jenis Pemasangan Surface mount
Package Code HVQCCN
Typical Phase Noise -100 dBc/Hz at 10 kHz carrier offset
Typical Spur Level Below -90 dBc with the specified loop filter

Panduan Konfigurasi Pin ADF4007BCPZ-RL7 hvqccn

Konfigurasi pin untuk ADF4007BCPZ-RL7 (hvqccn pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai hvqccn untuk ADF4007BCPZ-RL7

Tiada data garisan pin yang diperoleh untuk ADF4007BCPZ-RL7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADF4007BCPZ-RL7 patut untuk 6 aplikasis: Wireless Transceiver Local Oscillator, Microwave Up-Converter and Down-Converter Reference, Communications Test and Measurement Equipment, Microwave Communication Test Loops, RF Signal-Chain Frequency Reference, Clock and Frequency Reference Generation.

🌐

Wireless Transceiver Local Oscillator

The ADF4007BCPZ-RL7 is appropriate for a wireless transceiver local-oscillator or frequency-translation stage that must derive a high-frequency signal from a 20 MHz CMOS reference. Its 7.5 GHz maximum RF frequency and 120 MHz maximum PFD frequency provide substantial tuning and phase-detection range for communications architectures. The selectable 8, 16, 32, and 64 divider settings let the designer choose the integer-N relationship needed by the surrounding RF chain. A separate charge-pump supply supports an extended tuning-voltage range, which is useful when the loop filter must cover a wide frequency interval. The practical trade-off is that reference noise, loop bandwidth, and output matching remain central to achieving useful phase-noise and spur performance.

🌐

Microwave Up-Converter and Down-Converter Reference

The ADF4007BCPZ-RL7 can provide the controlled reference required by microwave up-converter or down-converter signal chains. Operation to 7.5 GHz makes the device applicable where local-oscillator generation must share a common reference with other communications channels. The Analog Devices evaluation hardware includes dedicated RF input and output SMA connections, allowing the frequency path to be characterized before integration. In production, the designer must control RF trace impedance, return loss, and isolation while keeping the phase detector and charge-pump loop compact. The integer-N architecture simplifies frequency planning, although the loop filter must be recalculated whenever the reference frequency, channel spacing, or phase-noise target changes.

🖥️

Communications Test and Measurement Equipment

The ADF4007BCPZ-RL7 is useful in communications test equipment requiring a programmable, reference-locked RF source for calibration or signal-generation blocks. Its 7.5 GHz RF ceiling, programmable divider choices, and 20 MHz CMOS reference input support repeatable multi-channel test setups. The EVAL-ADF4007 platform simplifies initial loop evaluation because its divider-selection links expose the 8, 16, 32, and 64 operating choices. When integrating the device into an instrument, the reference oscillator should have low phase noise and stable supply rails, while the RF output network should be designed for the required frequency range. The loop-filter values should be optimized from the actual phase-noise and spur requirements rather than copied without accounting for board parasitics.

📡

Microwave Communication Test Loops

The ADF4007BCPZ-RL7 can be applied to microwave communication test loops in which a stable 20 MHz reference must drive an RF carrier at a selected divider-dependent frequency. The 7.5 GHz maximum operating frequency supports the upper RF range addressed by the ADF4007 family, while the 120 MHz PFD ceiling enables flexible phase-detector rates. During bench setup, the evaluation board allows RF and reference paths to be connected through SMA interfaces and the divider options to be changed without an immediate full custom-board build. Final hardware should minimize loop-filter area and keep sensitive reference and RF nodes away from digital switching circuitry. Supply decoupling must also account for transient current from the separate charge-pump circuit.

📶

RF Signal-Chain Frequency Reference

The ADF4007BCPZ-RL7 is suitable for producing a controllable reference within an RF signal chain where phase locking is preferable to a free-running source. Its integer-N divider architecture, external divide control, and separate charge-pump supply allow the tuning network to be tailored to the required channel plan. The 20 MHz CMOS reference input supports direct connection from a suitable clock source when its amplitude, waveform, and noise satisfy the device requirements. RF layout remains critical because the reference, phase-detector, charge-pump, loop-filter, and output paths can create unwanted coupling. Designers should maintain controlled impedance and use a single well-defined ground reference beneath the exposed pad. The same loop-filter framework used for the manufacturer's typical circuit provides a practical starting point for tuning.

⏱️

Clock and Frequency Reference Generation

The ADF4007BCPZ-RL7 can serve as the PLL element in a clock or frequency-reference subsystem when an RF-synthesizer implementation is preferable to a conventional low-frequency clock generator. Its maximum RF frequency of 7.5 GHz and programmable divider settings permit several frequency ratios to be derived from one stable source. The component also accepts a 20 MHz CMOS reference, enabling it to share an existing system clock when the timing quality is suitable. A separate VP supply broadens the available charge-pump and tuning-voltage design space, but it also requires deliberate rail planning. In a multi-rail system, stable sequencing and local decoupling help prevent reference modulation or PLL instability. The principal trade-off is the complexity of an integer-N loop compared with a fixed-frequency clock output.

Ringkasan Produk Disebarkan

ADF4007BCPZ Analog Devices Dipergunakan di: Wireless Transceiver Local Oscillator, Microwave Up-Converter and Down-Converter Reference, Communications Test and Measurement Equipment, Microwave Communication Test Loops, RF Signal-Chain Frequency Reference, Clock and Frequency Reference Generation EVAL-ADF4007 Evaluation platform for evaluating ADF4007 PLL performance Dipergunakan di: Wireless Transceiver Local Oscillator, Microwave Up-Converter and Down-Converter Reference, Communications Test and Measurement Equipment, Microwave Communication Test Loops, RF Signal-Chain Frequency Reference, Clock and Frequency Reference Generation
What is the operating frequency of the ADF4007BCPZ-RL7?
The ADF4007BCPZ-RL7 supports RF operation up to 7.5 GHz and phase-frequency-detector operation up to 120 MHz. According to the Analog Devices ADF4007 data sheet, Rev. B, the device is a high-frequency divider and PLL synthesizer intended for communications systems. The 7.5 GHz figure describes the maximum RF operating frequency, while the 120 MHz value applies specifically to the PFD rate.
What type of frequency synthesizer is the ADF4007BCPZ-RL7?
The ADF4007BCPZ-RL7 is an integer-N PLL frequency synthesizer with an integrated low-noise digital PFD, precision charge pump, and divider or prescaler. The Analog Devices ADF4007 data sheet, Rev. B, describes two external control pins that select divider values of 8, 16, 32, or 64. It is intended to generate a controlled frequency from a CMOS reference source.
What supply voltage does the ADF4007BCPZ-RL7 use?
The ADF4007BCPZ-RL7 operates from a 3.3 V supply and also provides a separate charge-pump supply identified as VP. According to the Analog Devices ADF4007 data sheet, Rev. B, separating the charge-pump supply permits an extended tuning-voltage range. The VP value must therefore be selected with the required loop-filter voltage and RF output operating conditions in mind.
Which divide ratios are available in the ADF4007BCPZ-RL7?
The ADF4007BCPZ-RL7 supports divide settings of 8, 16, 32, and 64. The Analog Devices ADF4007 data sheet, Rev. B, states that these divider or prescaler values are selected using two external control pins. The EVAL-ADF4007 evaluation board also provides hardware links for choosing the four divide ratios during frequency-synthesizer evaluation.
Where can I download the ADF4007BCPZ-RL7 datasheet PDF?
The official ADF4007BCPZ-RL7 data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4007.pdf. The document is identified as Rev. B and covers the high-frequency divider and PLL synthesizer, electrical characteristics, pin descriptions, applications, and the loop-filter design information used with ADIsimPLL.
Where can I find the ADF4007BCPZ-RL7 pinout?
Use the pin-description table and package drawing in the Analog Devices ADF4007 data sheet, Rev. B, to assign the 20 terminal connections. The ADF4007BCPZ-RL7 uses a 20-lead WFQFN exposed-pad CSP with an exposed ground pad. The package drawing and pin table should be used together when assigning PCB nets and thermal-pad connections.
What are the key specifications of ADF4007BCPZ-RL7 that engineers should know?
The key specifications are a 7.5 GHz maximum RF frequency, a 120 MHz maximum PFD frequency, a 20 MHz CMOS reference, a 3.3 V supply, and selectable divide ratios of 8, 16, 32, and 64. According to the Analog Devices ADF4007 data sheet, Rev. B, the device is packaged as a 20-lead WFQFN exposed-pad CSP and operates from -40 °C to +85 °C.
Where can I buy ADF4007BCPZ-RL7 online?
Use the Request a Quote form on this page to request ADF4007BCPZ-RL7 availability, order quantity, and a current quotation. The component is an Analog Devices integer-N PLL synthesizer in a 20-lead WFQFN exposed-pad package. Quote requests allow the required reel format, quantity, and delivery expectations to be reviewed for the exact ADF4007BCPZ-RL7 ordering code.
What is the price of the ADF4007BCPZ-RL7?
The current price of the ADF4007BCPZ-RL7 should be requested through the Request a Quote form on this page. Pricing can depend on order quantity, reel packaging, and current component availability. The form is the appropriate route for a quotation tied to the exact ADF4007BCPZ-RL7 manufacturer part number rather than a related package or reel suffix.
What is the lead time for the ADF4007BCPZ-RL7?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on the requested quantity and the availability of the exact Analog Devices ordering code. Providing the target quantity and required delivery schedule allows procurement to confirm the most useful production commitment.
Is the ADF4007BCPZ-RL7 in stock?
Request current stock status through the Request a Quote form on this page, including your required quantity and delivery schedule. Stock availability can change with order volume and reel-packaging requirements. A quote response for the exact ADF4007BCPZ-RL7 part number provides the appropriate confirmation for production planning.
ADF4007BCPZ-RL7 vs ADF4007BCPZ - which is the better ordering option?
ADF4007BCPZ-RL7 is the exact full ordering code for the target device, while ADF4007BCPZ is the base manufacturer part number shown in the product listing. Both identify the same ADF4007 family member, and the product page comparison focuses on package and device function. For a new design, specify the complete ordering suffix required by procurement and package assembly.
When should I choose the ADF4007BCPZ-RL7 instead of another PLL synthesizer?
Choose the ADF4007BCPZ-RL7 when a communications design needs an integer-N PLL operating to 7.5 GHz, accepts a 20 MHz CMOS reference, and provides divider settings of 8, 16, 32, and 64. According to the Analog Devices ADF4007 data sheet, Rev. B, it also supports a separate charge-pump supply for an extended tuning-voltage range.
Is the ADF4007BCPZ-RL7 suitable for RF communications equipment?
The ADF4007BCPZ-RL7 is suitable for RF communications equipment requiring frequency synthesis up to 7.5 GHz. The Analog Devices ADF4007 data sheet, Rev. B, identifies communications applications and describes a PFD frequency up to 120 MHz. Suitability still depends on the required reference, loop bandwidth, tuning range, spur level, and output-power conditions.
What can replace the ADF4007BCPZ-RL7?
The confirmed same-family ordering option is ADF4007BCPZ, which denotes the base ADF4007 device with the same 20-lead WFQFN exposed-pad configuration and core synthesizer functions. The cross-reference search did not identify a distinct cross-brand part that can be confirmed as pin-to-pin and parametrically equivalent. Confirm the complete ordering suffix and compare every pin, voltage, divider, and programming requirement before substitution.

Data referensi kejuruteraan untuk ADF4007BCPZ-RL7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the complete ADF4007BCPZ-RL7 ordering code when your communications design requires an integer-N PLL synthesizer operating to 7.5 GHz, a 20 MHz CMOS reference, and divider settings of 8, 16, 32, or 64 in a 20-lead WFQFN exposed-pad package. The separate charge-pump supply is useful for designs needing an extended tuning-voltage range. ADF4007BCPZ provides the same core device and package functions and is a practical selection when that base ordering code matches the required procurement and assembly format. No distinct cross-brand drop-in equivalent could be confirmed from the available cross-reference information, so a functional substitute should not be assumed to be pin-compatible without a complete pin-level and parameter-level review. In either case, loop-filter design, reference quality, RF layout, and exposed-pad grounding remain the decisive implementation factors.

Perbandingan dengan Gantian

Parametr Produk Ini ADF4007BCPZ
Brand Analog Devices Analog Devices
Package 20-lead WFQFN exposed-pad CSP 20-lead WFQFN exposed-pad CSP
Maximum RF Frequency 7.5 GHz 7.5 GHz
Maximum PFD Frequency 120 MHz 120 MHz
Reference Input 20 MHz CMOS 20 MHz CMOS
Supply Voltage 3.3 V 3.3 V
Divider Settings 8, 16, 32, or 64 8, 16, 32, or 64
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Output Type Clock Clock

Penyeberangsung Jelas

  • High RF operating range with flexible divider selection (vsADF4007BCPZ)
  • Separate charge-pump supply flexibility (vsADF4007BCPZ)
  • Communications-focused PLL integration (vsADF4007BCPZ)

Catatan Desain

Route the 20 MHz reference, charge-pump connection, loop-filter components, and RF output as compact, controlled-impedance paths. Keep the reference trace away from switching nodes and preserve a continuous ground reference under the exposed pad. The loop-filter area should be minimized because parasitic inductance and capacitance can shift the intended loop bandwidth, phase margin, and spur performance.

Plan the 3.3 V supply and separate charge-pump supply as distinct rails, with local high-frequency decoupling placed close to their respective device pins. Estimated: for a 3.3 V rail, 100 nF provides only local high-frequency bypassing and should not replace bulk capacitance sized from the board's transient requirement. Keep the VP value compatible with the charge-pump output swing and the tuning-voltage range required by the loop filter.

Calculate the loop filter from the actual reference frequency, target loop bandwidth, charge-pump current, and phase-noise targets. The Analog Devices data sheet identifies a typical implementation using ADIsimPLL-derived component values, with phase noise of -100 dBc/Hz at a 10 kHz offset and spurs below -90 dBc. Treat those results as a design reference and validate the final layout because PCB parasitics and component tolerances can alter the response.

Do not assume that the base ordering code and the complete reel ordering code can be mixed without procurement and assembly review. Confirm the 20-lead WFQFN exposed-pad land pattern, pin assignments, divider-control levels, reference amplitude, and supply sequencing against the manufacturer data sheet before releasing a PCB or production order.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The component is an industrial-temperature clock and timing IC with a -40 °C to +85 °C operating range. Compliance declarations are not stated in the available product information.

Pencarian Berhubungan

ADF4007BCPZ-RL7 datasheet ADF4007BCPZ-RL7 specifications ADF4007BCPZ-RL7 pinout ADF4007BCPZ-RL7 datasheet pdf ADF4007BCPZ-RL7 equivalent ADF4007BCPZ-RL7 replacement ADF4007BCPZ-RL7 price ADF4007BCPZ-RL7 stock Analog Devices ADF4007BCPZ-RL7 ADF4007BCPZ-RL7 7.5 GHz PLL ADF4007BCPZ-RL7 vs ADF4007BCPZ ADF4007BCPZ-RL7 application circuit

Komponen dan Tanda berkaitan

Analog Devices ADF4007BCPZ-RL7 ADF4007BCPZ ADF4007 EVAL-ADF4007 integer-N PLL frequency synthesizer phase-locked loop phase-frequency detector PFD charge pump divider prescaler RF communications local oscillator ADIsimPLL 20 MHz CMOS reference 120 MHz PFD 7.5 GHz RF frequency 20-lead WFQFN exposed-pad CSP QFN family surface mount SMD phase noise loop filter
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ