Analog Devices

ADF4150BCPZ-RL7 - 4.4GHz Fractional-N PLL Synthesizer | Analog Devices

MPN: ADF4150BCPZ-RL7 ✓ Aktif
24-lead WFQFN with exposed pad Package 4.4 GHz Speed
MOQ: 1 |

ADF4150BCPZ-RL7 Ringkasan

The Analog Devices ADF4150BCPZ-RL7 is a fractional-N or integer-N frequency synthesizer IC for RF phase-locked-loop designs, operating up to 4.4 GHz in a 24-lead WFQFN exposed-pad package. The device works with an external voltage-controlled oscillator, loop filter, and reference frequency, providing the core PLL control functions for programmable RF signal generation. It supports fractional-N and integer-N synthesis modes, and the VCO frequency can be divided by 1, 2, 4, 8, or 16 to support RF frequency-generation requirements. According to the Analog Devices ADF4150 product page, the ADF4150 is software compatible with the ADF4350. The ADF4150BCPZ-RL7 designation identifies the Analog Devices frequency-synthesizer family in a 24-lead WFQFN exposed-pad package, with the -RL7 ordering suffix associated with the reel-lead configuration shown by the manufacturer’s product information. This is not a self-oscillating signal source: an external VCO and carefully designed loop filter remain required to complete the RF synthesizer. The device is intended for designers who need programmable RF output, phase control, and flexible divide ratios within an external-VCO PLL architecture. Use the manufacturer datasheet for the complete electrical limits, register map, recommended reference and power-supply circuits, pin descriptions, and timing information before finalizing a design. This page also organizes practical design considerations, replacement questions, and application guidance around the ADF4150BCPZ-RL7 rather than presenting the part as a stand-alone RF oscillator.

Pilihan pengganti yang segera untuk ADF4150BCPZ-RL7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADF4150BCPZ-RL7 (sama faktor bentuk dan kaki) — berbeza dalam Package, Architecture, Operating Temperature Range, Control Interface, Device Type.

Analog Devices
Architecture: Phase-locked loop with integrated dividers
Control Interface: Programmable serial interface
Device Type: Fractional-N and integer-N RF frequency synthesizer
Bandingkan Dengan ADF4150BCPZ-RL7 →
Analog Devices
Package: 32-LFCSP (5 mm x 5 mm) with exposed pad
Operating Temperature Range: -40C to +85C
Control Interface: 3-wire SPI-compatible serial
Bandingkan Dengan ADF4150BCPZ-RL7 →
Analog Devices
Package: 32-WFQFN exposed pad, CSP
Operating Temperature Range: -40°C to +85°C
Bandingkan Dengan ADF4150BCPZ-RL7 →
Analog Devices
Package: 32-lead LFCSP with exposed pad
Architecture: Fractional-N or integer-N PLL
Operating Temperature Range: -40 °C to +85 °C
Bandingkan Dengan ADF4150BCPZ-RL7 →

ADF4150BCPZ

✅ Masuk Drop-In
Analog Devices
📦 24-lead WFQFN with exposed pad
Fractional-N and integer-N RF frequency synthesizer · 4.4 GHz · 10 MHz to 4 GHz · 750 MHz · Phase-locked loop with integrated dividers · External VCO, loop filter, and reference frequency source · 1, 2, 4, 8, or 16 · Programmable serial interface

Hubungi untuk harga

Lihat Datasheet →

ADF4150HVBCPZ-RL7

✅ Masuk Drop-In
📦 24-lead LFCSP with exposed pad
Same ADF4150 family and -RL7 ordering family; the HV variant is identified as an integer-N device with a 750 MHz output limit versus the ADF4150 up to 4.4 GHz.

📋 Alternatif rujukan (tidak dalam katalog)

ADF4350BCPZ-RL7

✅ Masuk Drop-In
Analog Devices
📦 24-lead WFQFN with exposed pad
Fractional-N and Integer-N PLL frequency synthesizer with integrated VCO · 4.4 GHz · Fractional-N and Integer-N · Integrated · External reference frequency · External · -40°C to +85°C · 32-WFQFN exposed pad, CSP

Hubungi untuk harga

Lihat Datasheet →

ADF4351BCPZ-RL7

✅ Masuk Drop-In
Analog Devices
📦 24-lead WFQFN with exposed pad
Fractional-N or integer-N frequency synthesizer with integrated VCO · 35 MHz to 4400 MHz · 4.4 GHz · 10 MHz to 250 MHz · 3.0 V to 3.6 V · 32 V · Fractional-N or integer-N PLL · Integrated wideband voltage-controlled oscillator

Hubungi untuk harga

Lihat Datasheet →

ADF4350BCPZ

✅ Masuk Drop-In
Analog Devices
📦 24-lead WFQFN with exposed pad
137.5 MHz to 4400 MHz · 2200 MHz to 4400 MHz · Fractional-N / Integer-N PLL · Up to 32 MHz (typical) · Divide-by-1/2/4/8/16 · Sub-Hz resolution

Hubungi untuk harga

Lihat Datasheet →

ADF4150BCPZ-RL7 Spesifikasi

Product Type Fractional-N/Integer-N frequency synthesizer IC
Maximum Frequency 4.4 GHz
Synthesis Modes Fractional-N or Integer-N
Architecture External-VCO phase-locked loop
VCO Requirement External voltage-controlled oscillator required
Loop Filter External loop filter required
Reference Requirement External reference frequency required
VCO Divide Ratios 1/2, 1/4, 1/8, 1/16
Software Compatibility Software compatible with ADF4350
Kemasan 24-lead WFQFN with exposed pad
Jenis Pemasangan Surface mount
Orderable Suffix -RL7
Channel Count 1

Panduan Konfigurasi Pin ADF4150BCPZ-RL7 24-lead wfqfn with exposed pad

Konfigurasi pin untuk ADF4150BCPZ-RL7 (24-lead wfqfn with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 24-lead wfqfn with exposed pad untuk ADF4150BCPZ-RL7

Tiada data garisan pin yang diperoleh untuk ADF4150BCPZ-RL7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADF4150BCPZ-RL7 patut untuk 6 aplikasis: Programmable RF Local Oscillator, RF Communication Channel Synthesizer, RF Test Instrument Signal Source, Frequency Hopping Radio Synthesizer, Microwave Down-Converter Reference, Industrial RF Monitoring System.

🌐

Programmable RF Local Oscillator

The ADF4150BCPZ-RL7 fits a programmable RF local-oscillator stage where the output must reach 4.4 GHz and the design uses an external VCO. Its fractional-N and integer-N operation gives the designer two synthesis approaches within one PLL controller family. The external loop filter and VCO are placed according to the Analog Devices application guidance, while the reference input supplies the phase-detection source. This arrangement is useful in RF communications equipment where the synthesizer must support several related frequencies and the VCO technology is already selected for the required output power and tuning range.

🌐

RF Communication Channel Synthesizer

In an RF communication channel, the ADF4150BCPZ-RL7 can control an external VCO for programmable carrier generation up to 4.4 GHz. Fractional-N operation is useful when the required channel spacing is finer than the integer divide-ratio relationship alone allows, while integer-N mode can simplify designs requiring an exact integer division arrangement. The actual channel spacing, lock time, and phase-noise performance depend on the reference source, VCO tuning slope, loop bandwidth, and component values. The manufacturer’s stated ADF4350 software compatibility may also simplify shared control software during platform development.

🖥️

RF Test Instrument Signal Source

The ADF4150BCPZ-RL7 is suitable for a test-instrument signal-source architecture that uses a separate external VCO and loop filter. The 4.4 GHz upper frequency supports RF test applications, while fractional-N and integer-N modes provide flexibility for choosing stimulus frequencies. Because the device is a synthesizer controller rather than a complete source, the instrument designer must also account for VCO output power, frequency accuracy, spur performance, reference phase noise, connector isolation, and user-interface calibration. These system-level elements determine final laboratory performance.

📡

Frequency Hopping Radio Synthesizer

A frequency-hopping radio can use the ADF4150BCPZ-RL7 as the PLL controller for an external VCO, with the register interface changing the synthesized frequency according to the hop plan. Its operation up to 4.4 GHz covers common RF transceiver bands when paired with an appropriate VCO. The critical design trade-off is lock time versus phase noise: loop bandwidth and filter values must support the hopping interval without allowing excessive integrated phase noise. The external reference, VCO, loop filter, and controlled board layout remain integral to achieving repeatable channel transitions.

📡

Microwave Down-Converter Reference

The ADF4150BCPZ-RL7 can provide the reference or local-oscillator signal for a microwave down-conversion subsystem when an external VCO is available. The 4.4 GHz maximum makes it relevant to many microwave signal-chain designs, while the selectable 1/2, 1/4, 1/8, and 1/16 VCO divide ratios can help organize a frequency plan. Integration noise from the VCO and reference source must be considered because the PLL multiplies phase noise toward the output. The loop filter should therefore be selected for the intended conversion architecture and measured for phase noise and spur performance.

🏭

Industrial RF Monitoring System

An industrial RF monitoring system can use the ADF4150BCPZ-RL7 for a compact, programmable RF reference or local-oscillator path. The device supports both fractional-N and integer-N synthesis and operates with an external VCO, allowing the RF frequency plan to follow the detector and antenna requirements. Its suitability for an industrial enclosure depends on thermal conditions, reference stability, electromagnetic compatibility, and the stability of the external VCO over temperature. A robust design should retain the manufacturer’s recommended decoupling and grounding topology and verify phase noise and lock behavior across the intended environmental range.

What is the ADF4150BCPZ-RL7?
The ADF4150BCPZ-RL7 is a fractional-N and integer-N frequency synthesizer IC for RF phase-locked-loop designs, with operation up to 4.4 GHz in a 24-lead WFQFN exposed-pad package. According to the Analog Devices ADF4150 product page, it is used with an external voltage-controlled oscillator, loop filter, and external reference frequency. It is therefore a PLL synthesizer controller, not a standalone VCO or complete self-oscillating signal generator.
What frequency range does the ADF4150BCPZ-RL7 support?
The ADF4150BCPZ-RL7 supports RF synthesis up to 4.4 GHz. The Analog Devices distributor listing identifies the component as a fractional-N and integer-N frequency synthesizer rated at 4.4 GHz. The manufacturer also states that the VCO frequency can be divided by 1, 2, 4, 8, or 16, allowing the external VCO arrangement to generate multiple related RF outputs from the PLL architecture.
Does the ADF4150BCPZ-RL7 include a VCO?
No. The ADF4150BCPZ-RL7 requires an external voltage-controlled oscillator, external loop filter, and external reference frequency. This is stated in the Analog Devices ADF4150 product-page description and datasheet. The IC supplies the phase-locked-loop control functions, while the external VCO and passive loop-filter components determine the achievable output frequency and loop performance.
Where can I download the ADF4150BCPZ-RL7 datasheet PDF?
The official ADF4150 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4150.pdf. Use the manufacturer PDF for the complete pin descriptions, electrical characteristics, register definitions, application circuit, and recommended component values. The product page at https://www.analog.com/en/products/adf4150.html provides the corresponding family overview and product resources.
Where can I find the ADF4150BCPZ-RL7 pinout?
The ADF4150BCPZ-RL7 uses a 24-lead WFQFN package with an exposed pad, and its pin configuration is documented in the official Analog Devices ADF4150 datasheet. Consult the pin-description and package-drawing sections before assigning PCB tracks or connecting power and ground. The distributor description confirms the 24-lead WFQFN exposed-pad package; the datasheet is the controlling document for individual pin names and exposed-pad connections.
Is the ADF4150BCPZ-RL7 software compatible with the ADF4350?
Yes. The Analog Devices ADF4150 product page states that the ADF4150 is software compatible with the ADF4350. This compatibility can simplify firmware and register-handling reuse between related designs, although the two devices must still be checked for their separate frequency ranges, feature sets, package details, and application requirements before making a direct substitution.
Can the ADF4150BCPZ-RL7 operate in integer-N mode?
Yes. The Analog Devices product information identifies the ADF4150 as supporting both fractional-N and integer-N phase-locked-loop synthesis. Integer-N operation is appropriate when the required output frequency can be generated without fractional feedback division, while fractional-N mode provides additional frequency-resolution flexibility. The external VCO, reference, and loop-filter design still determines the final phase-noise and tuning performance.
What external components does an ADF4150BCPZ-RL7 design need?
An ADF4150BCPZ-RL7 design requires an external voltage-controlled oscillator, an external loop filter, and an external reference frequency source. The Analog Devices family description explicitly identifies these three external elements. Depending on the system, the design will also need suitable decoupling, reference-conditioning components, VCO-control components, and a properly laid-out RF output network selected from the manufacturer’s recommended application circuit.
What is the difference between ADF4150BCPZ-RL7 and ADF4150BCPZ?
The manufacturer’s cross-reference material indicates that ADF4150BCPZ and ADF4150BCPZ-RL7 are closely related orderable versions of the same ADF4150 family, with differences including the ordering suffix and packaging configuration. The ADF4150BCPZ-RL7 listing identifies a 24-lead WFQFN exposed-pad package, while the comparison data reports a different factory pack quantity. Confirm the exact suffix, reel orientation, and package marking before treating either ordering code as interchangeable.
What can replace the ADF4150BCPZ-RL7?
The closest documented replacement candidates are related Analog Devices ADF4150-family and ADF4350-family orderable parts, but a true drop-in replacement must match the 24-lead WFQFN footprint, pin arrangement, register behavior, frequency range, reference requirements, and external-VCO architecture. The Analog Devices cross-reference search specifically identifies ADF4350 as software compatible with ADF4150. Verify the exact package and pinout in the manufacturer data before replacing the fitted device.
Is the ADF4150BCPZ-RL7 a drop-in replacement for the ADF4350BCPZ-RL7?
The ADF4150 is described by Analog Devices as software compatible with the ADF4350, which makes the families useful candidates for evaluation. However, a direct drop-in decision still requires confirmation of identical package pinout, maximum frequency, reference-frequency limits, divider architecture, power requirements, and register-map differences. The available comparison listings alone are not sufficient to certify a drop-in replacement.
When should I choose the ADF4150BCPZ-RL7 over the ADF4350 family?
Choose the ADF4150BCPZ-RL7 when the design benefits from its documented fractional-N and integer-N operation, operation up to 4.4 GHz, and the ADF4150-family control architecture. Choose an ADF4350-family device when its documented frequency range, divider structure, and software environment better match the RF design. The manufacturer states that ADF4150 is software compatible with ADF4350, so the final selection should compare the full datasheet specifications rather than software compatibility alone.
Is the ADF4150BCPZ-RL7 suitable for RF test and measurement equipment?
The ADF4150BCPZ-RL7 can be used in RF systems that require an external-VCO PLL synthesizer and programmable RF frequency generation up to 4.4 GHz. Such applications include instrument reference and local-oscillator generation, communication RF channels, and frequency-generation subsystems. Its suitability depends on the selected VCO, loop bandwidth, reference quality, PCB layout, and required phase-noise performance.
How should the loop filter be selected for the ADF4150BCPZ-RL7?
Select the loop filter from the target output frequency, reference frequency, phase-noise requirement, lock-time target, and allowable VCO tuning range. The ADF4150 requires an external loop filter, so its component values are not interchangeable across all designs without recalculation. Use the Analog Devices application guidance and loop-filter design procedure to select resistance and capacitance values, and evaluate stability and phase margin in simulation.
How do I buy the ADF4150BCPZ-RL7 and check current lead time?
Use the Request a Quote form on this page to request the ADF4150BCPZ-RL7, current commercial terms, and lead time. The part is identified in the product listings as an Analog Devices frequency synthesizer in a 24-lead WFQFN exposed-pad package. Confirm the exact -RL7 ordering suffix, reel packaging, quantity, and delivery requirements when submitting the request.

Data referensi kejuruteraan untuk ADF4150BCPZ-RL7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADF4150BCPZ-RL7 for an external-VCO RF synthesizer that may operate up to 4.4 GHz and benefits from either fractional-N or integer-N synthesis. Choose ADF4150BCPZ when the same core device is needed with the base ordering code and the documented 490-piece pack configuration is preferable. Consider ADF4150HVBCPZ-RL7 only when the design is limited to its documented 750 MHz integer-N output range. The ADF4350-family candidates are useful because Analog Devices identifies ADF4150 as software compatible with ADF4350, but the maximum frequency, channel configuration, divider architecture, register behavior, and exact pinout must match before installation. For every candidate, verify the exposed-pad connection, reference requirements, supply limits, loop-filter design, and package drawings against the current manufacturer datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini ADF4150BCPZ ADF4150HVBCPZ-RL7 ADF4350BCPZ-RL7 ADF4351BCPZ-RL7 ADF4350
Package 24-lead WFQFN with exposed pad 24-lead WFQFN with exposed pad 24-lead LFCSP with exposed pad 24-lead WFQFN with exposed pad 24-lead WFQFN with exposed pad 24-lead WFQFN with exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Ordering Suffix -RL7 Base ordering code -RL7 -RL7 -RL7 Base ordering code

Penyeberangsung Jelas

  • Higher documented upper operating frequency than the HV ADF4150 option (vsADF4150HVBCPZ-RL7)
  • Supports both fractional-N and integer-N synthesis modes (vsADF4150HVBCPZ-RL7)
  • Documented software relationship with the ADF4350 family (vsADF4350)
  • Reel-oriented ordering option with a larger reported factory pack quantity (vsADF4150BCPZ)

Catatan Desain

Place the ADF4150BCPZ-RL7 close to its reference, decoupling, and loop-filter components, and keep the RF control path away from noisy digital and switching circuitry. The exposed pad requires a carefully designed thermal-via and ground-plane arrangement according to the manufacturer package guidance. Maintain short ground returns for every supply pin and use the recommended component placement shown in the Analog Devices application circuit.

The PLL is sensitive to reference noise, supply disturbance, and unwanted feedback. Keep the reference route away from the VCO control line and RF output path, provide local supply decoupling, and avoid routing high-current or fast-switching signals beneath the analog section. Validate the reference amplitude and edge quality at the IC and ensure the VCO-control connection is short and well isolated to prevent modulation of the synthesized output.

Do not treat the ADF4150BCPZ-RL7 as a self-oscillating VCO. The external VCO, loop filter, and reference determine whether the loop locks and what phase noise, spur, and lock-time performance is achieved. Before programming the device, confirm that the selected register values match the reference frequency and external VCO tuning range. A PLL can appear functional at one frequency while failing to lock elsewhere if those operating limits are not designed together.

Use the manufacturer’s pin-description and application-circuit layouts as the basis for signal routing, especially for the exposed pad, reference input, supply pins, and VCO tune path. Keep the loop-filter components compact and symmetric where practical, and terminate unused or reserved pins exactly as directed by the datasheet. PCB parasitics can alter loop dynamics, so evaluate the final layout with the same VCO and filter network used in production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The cross-reference comparison identifies RoHS information for this product family, but a definitive manufacturer declaration was not available in the provided product data. AEC-Q100 qualification is not applicable to this frequency-synthesizer IC based on the available category information.

Pencarian Berhubungan

ADF4150BCPZ-RL7 datasheet ADF4150BCPZ-RL7 pinout ADF4150BCPZ-RL7 datasheet pdf ADF4150BCPZ-RL7 equivalent ADF4150BCPZ-RL7 replacement ADF4150BCPZ-RL7 footprint ADF4150BCPZ-RL7 schematic ADF4150BCPZ-RL7 price ADF4150BCPZ-RL7 stock ADF4150BCPZ-RL7 vs ADF4350 Analog Devices ADF4150BCPZ-RL7 4.4GHz fractional-N PLL synthesizer 24-lead WFQFN PLL pinout ADF4150 RF local oscillator

Komponen dan Tanda berkaitan

Analog Devices ADF4150BCPZ-RL7 ADF4150BCPZ ADF4150HVBCPZ-RL7 ADF4350BCPZ-RL7 ADF4351BCPZ-RL7 ADF4350 fractional-N PLL integer-N PLL frequency synthesizer phase-locked loop voltage-controlled oscillator VCO loop filter external reference RF synthesizer RF local oscillator frequency hopping software compatibility 24-lead WFQFN LFCSP exposed pad surface-mount IC clock and timing IC semiconductor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ