ADF4150BCPZ-RL7 - 4.4GHz Fractional-N PLL Synthesizer | Analog Devices
부품 번호: ADF4150BCPZ-RL7 ✓ 활성ADF4150BCPZ-RL7 개요
드롭인 대체품: ADF4150BCPZ-RL7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADF4150BCPZ-RL7 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Architecture, Operating Temperature Range, Control Interface, Device Type.
ADF4150BCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADF4150HVBCPZ-RL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADF4350BCPZ-RL7
✅ 드롭인가격 문의
데이터시트 보기 →ADF4351BCPZ-RL7
✅ 드롭인가격 문의
데이터시트 보기 →ADF4350BCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADF4150BCPZ-RL7 사양
| Product Type | Fractional-N/Integer-N frequency synthesizer IC |
| Maximum Frequency | 4.4 GHz |
| Synthesis Modes | Fractional-N or Integer-N |
| Architecture | External-VCO phase-locked loop |
| VCO Requirement | External voltage-controlled oscillator required |
| Loop Filter | External loop filter required |
| Reference Requirement | External reference frequency required |
| VCO Divide Ratios | 1/2, 1/4, 1/8, 1/16 |
| Software Compatibility | Software compatible with ADF4350 |
| 패키지 | 24-lead WFQFN with exposed pad |
| 실장 유형 | Surface mount |
| Orderable Suffix | -RL7 |
| Channel Count | 1 |
ADF4150BCPZ-RL7 24-lead wfqfn with exposed pad 핀 구성 가이드
ADF4150BCPZ-RL7(24-lead wfqfn with exposed pad 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADF4150BCPZ-RL7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADF4150BCPZ-RL7 적합 용도: 6 애플리케이션s: Programmable RF Local Oscillator, RF Communication Channel Synthesizer, RF Test Instrument Signal Source, Frequency Hopping Radio Synthesizer, Microwave Down-Converter Reference, Industrial RF Monitoring System.
Programmable RF Local Oscillator
The ADF4150BCPZ-RL7 fits a programmable RF local-oscillator stage where the output must reach 4.4 GHz and the design uses an external VCO. Its fractional-N and integer-N operation gives the designer two synthesis approaches within one PLL controller family. The external loop filter and VCO are placed according to the Analog Devices application guidance, while the reference input supplies the phase-detection source. This arrangement is useful in RF communications equipment where the synthesizer must support several related frequencies and the VCO technology is already selected for the required output power and tuning range.
추천
RF Communication Channel Synthesizer
In an RF communication channel, the ADF4150BCPZ-RL7 can control an external VCO for programmable carrier generation up to 4.4 GHz. Fractional-N operation is useful when the required channel spacing is finer than the integer divide-ratio relationship alone allows, while integer-N mode can simplify designs requiring an exact integer division arrangement. The actual channel spacing, lock time, and phase-noise performance depend on the reference source, VCO tuning slope, loop bandwidth, and component values. The manufacturer’s stated ADF4350 software compatibility may also simplify shared control software during platform development.
추천
RF Test Instrument Signal Source
The ADF4150BCPZ-RL7 is suitable for a test-instrument signal-source architecture that uses a separate external VCO and loop filter. The 4.4 GHz upper frequency supports RF test applications, while fractional-N and integer-N modes provide flexibility for choosing stimulus frequencies. Because the device is a synthesizer controller rather than a complete source, the instrument designer must also account for VCO output power, frequency accuracy, spur performance, reference phase noise, connector isolation, and user-interface calibration. These system-level elements determine final laboratory performance.
추천
Frequency Hopping Radio Synthesizer
A frequency-hopping radio can use the ADF4150BCPZ-RL7 as the PLL controller for an external VCO, with the register interface changing the synthesized frequency according to the hop plan. Its operation up to 4.4 GHz covers common RF transceiver bands when paired with an appropriate VCO. The critical design trade-off is lock time versus phase noise: loop bandwidth and filter values must support the hopping interval without allowing excessive integrated phase noise. The external reference, VCO, loop filter, and controlled board layout remain integral to achieving repeatable channel transitions.
추천
Microwave Down-Converter Reference
The ADF4150BCPZ-RL7 can provide the reference or local-oscillator signal for a microwave down-conversion subsystem when an external VCO is available. The 4.4 GHz maximum makes it relevant to many microwave signal-chain designs, while the selectable 1/2, 1/4, 1/8, and 1/16 VCO divide ratios can help organize a frequency plan. Integration noise from the VCO and reference source must be considered because the PLL multiplies phase noise toward the output. The loop filter should therefore be selected for the intended conversion architecture and measured for phase noise and spur performance.
추천
Industrial RF Monitoring System
An industrial RF monitoring system can use the ADF4150BCPZ-RL7 for a compact, programmable RF reference or local-oscillator path. The device supports both fractional-N and integer-N synthesis and operates with an external VCO, allowing the RF frequency plan to follow the detector and antenna requirements. Its suitability for an industrial enclosure depends on thermal conditions, reference stability, electromagnetic compatibility, and the stability of the external VCO over temperature. A robust design should retain the manufacturer’s recommended decoupling and grounding topology and verify phase noise and lock behavior across the intended environmental range.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADF4150BCPZ-RL7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADF4150BCPZ | ADF4150HVBCPZ-RL7 | ADF4350BCPZ-RL7 | ADF4351BCPZ-RL7 | ADF4350 |
|---|---|---|---|---|---|---|
| Package | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead LFCSP with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Ordering Suffix | -RL7 | Base ordering code | -RL7 | -RL7 | -RL7 | Base ordering code |
주요 차별점
- Higher documented upper operating frequency than the HV ADF4150 option (vs ADF4150HVBCPZ-RL7)
- Supports both fractional-N and integer-N synthesis modes (vs ADF4150HVBCPZ-RL7)
- Documented software relationship with the ADF4350 family (vs ADF4350)
- Reel-oriented ordering option with a larger reported factory pack quantity (vs ADF4150BCPZ)
설계 노트
Place the ADF4150BCPZ-RL7 close to its reference, decoupling, and loop-filter components, and keep the RF control path away from noisy digital and switching circuitry. The exposed pad requires a carefully designed thermal-via and ground-plane arrangement according to the manufacturer package guidance. Maintain short ground returns for every supply pin and use the recommended component placement shown in the Analog Devices application circuit.
The PLL is sensitive to reference noise, supply disturbance, and unwanted feedback. Keep the reference route away from the VCO control line and RF output path, provide local supply decoupling, and avoid routing high-current or fast-switching signals beneath the analog section. Validate the reference amplitude and edge quality at the IC and ensure the VCO-control connection is short and well isolated to prevent modulation of the synthesized output.
Do not treat the ADF4150BCPZ-RL7 as a self-oscillating VCO. The external VCO, loop filter, and reference determine whether the loop locks and what phase noise, spur, and lock-time performance is achieved. Before programming the device, confirm that the selected register values match the reference frequency and external VCO tuning range. A PLL can appear functional at one frequency while failing to lock elsewhere if those operating limits are not designed together.
Use the manufacturer’s pin-description and application-circuit layouts as the basis for signal routing, especially for the exposed pad, reference input, supply pins, and VCO tune path. Keep the loop-filter components compact and symmetric where practical, and terminate unused or reserved pins exactly as directed by the datasheet. PCB parasitics can alter loop dynamics, so evaluate the final layout with the same VCO and filter network used in production.
규정 준수 정보
The cross-reference comparison identifies RoHS information for this product family, but a definitive manufacturer declaration was not available in the provided product data. AEC-Q100 qualification is not applicable to this frequency-synthesizer IC based on the available category information.