Analog Devices

ADF5356BCPZ-RL7 - 13.6 GHz PLL/VCO Synthesizer | Analog Devices

MPN: ADF5356BCPZ-RL7 ✓ Aktif
3.15 V to 3.45 V Vdss 32-lead WFQFN with exposed pad Package 13.6 GHz Speed
MOQ: 1 |

ADF5356BCPZ-RL7 Ringkasan

The Analog Devices ADF5356BCPZ-RL7 is a 13.6 GHz microwave clock synthesizer and fractional-N or integer-N phase-locked-loop frequency synthesizer with an integrated wideband VCO, supplied in a 32-lead WFQFN exposed-pad package. Its fundamental VCO operates from 3400 MHz to 6800 MHz, while divider paths permit RF output frequencies down to 53.125 MHz. The device supports analog and digital supplies from 3.15 V to 3.45 V and charge-pump and VCO supplies from 4.75 V to 5.25 V.

A frequency synthesizer is a timing and RF signal-generation component that locks a high-frequency voltage-controlled oscillator to a stable external reference. Its internal hierarchy includes a PLL frequency synthesizer, a wideband microwave VCO, a clock synthesizer, and ultimately an integrated timing or RF signal-generation semiconductor. The reference input and internal feedback establish the closed-loop relationship between the programmed output frequency and the external reference, while an external loop filter controls loop dynamics.

The ADF5356 supports programmable division through divide-by-1, 2, 4, 8, 16, 32, and 64 paths. It provides three-wire register control, programmable output muting available through both pins and software, and hardware and software power-down modes. These features allow the frequency, output routing, reference behavior, calibration state, and power state to be configured through the device register map. The -40°C to +85°C operating range supports industrial and commercial equipment rather than automotive-qualified installations.

Its 3400 MHz to 6800 MHz fundamental VCO range covers major microwave bands while divider-based operation extends the usable output range toward lower RF frequencies. This architecture is useful when a system needs a single synthesizer to produce multiple related output frequencies, particularly where an external reference and programmable phase-locked loop provide predictable frequency relationships. The 13.6 GHz figure identifies the maximum characterized device or output capability rather than the fundamental VCO range.

Typical applications include microwave and millimeter-wave communication equipment, wireless infrastructure, test and measurement instruments, industrial radar and sensing systems, frequency conversion chains, and local oscillators. The integrated VCO reduces the number of discrete microwave components required to establish an RF output. Its programmable divider paths also make the device suitable for low-frequency phase-locked outputs when the required output can be derived from the 3400 MHz to 6800 MHz VCO fundamental.

The external loop filter, reference interface, decoupling network, RF output routing, and exposed thermal pad require careful PCB implementation. Power sequencing must accommodate separate analog, digital, VCO, and charge-pump supply domains. RF trace impedance, return paths, output matching, and isolation from switching circuitry are equally important because a stable PLL does not compensate for poor grounding, supply noise, or mismatched transmission lines.

This page combines the manufacturer specifications, functional architecture, drop-in migration options, application guidance, and PCB-design considerations needed to evaluate the ADF5356BCPZ-RL7. It also highlights the device's role within the broader PLL and microwave frequency-synthesizer category, helping engineers distinguish direct replacements from alternatives that require different register sequences or board-level redesign.

Pilihan pengganti yang segera untuk ADF5356BCPZ-RL7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADF5356BCPZ-RL7 (sama faktor bentuk dan kaki) — berbeza dalam Package, Loop Filter, Output Mute Control, Power-Down Modes, Product Type.

Analog Devices
Package: 32-pin WFQFN with exposed pad
Loop Filter: External loop filter required
Output Mute Control: Pin controllable and software controllable
Bandingkan Dengan ADF5356BCPZ-RL7 →
Analog Devices
Package: 32-lead WFQFN exposed-pad CSP
Output Mute Control: Pin-controlled and software-controlled
Product Type: Microwave wideband frequency synthesizer with integrated VCO
Bandingkan Dengan ADF5356BCPZ-RL7 →

ADF5356BCPZ

✅ Masuk Drop-In
Analog Devices
📦 32-lead WFQFN with exposed pad
13.6 GHz · 3400 MHz to 6800 MHz · 53.125 MHz · Fractional-N or integer-N · Divide by 1, 2, 4, 8, 16, 32, or 64 · Pin-controlled and software-controlled · External · External reference frequency

Hubungi untuk harga

Lihat Datasheet →

ADF5355BCPZ-RL7

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 32-lead WFQFN with exposed pad
Microwave wideband fractional-N and integer-N frequency synthesizer with integrated VCO · 6.8 GHz to 13.6 GHz · 13.6 GHz · 6.8 GHz · 2 RF outputs with divider-chain outputs · Fractional-N and integer-N · External reference frequency · External

Hubungi untuk harga

Lihat Datasheet →

ADF5355BCPZ

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Analog Devices
📦 32-lead WFQFN with exposed pad
Microwave wideband synthesizer with integrated VCO · 13.6 GHz · Fractional-N or integer-N PLL · External reference frequency required · External loop filter required · 3.15 V to 3.45 V · 4.75 V to 5.25 V · 3-wire serial interface

Hubungi untuk harga

Lihat Datasheet →

ADF5356BCPZ-RL7 Spesifikasi

Maximum Characterized Frequency 13.6 GHz
VCO Fundamental Frequency Range 3400 MHz to 6800 MHz
Minimum RF Output Frequency 53.125 MHz
PLL Architecture Fractional-N or integer-N
Available Divider Paths Divide by 1, 2, 4, 8, 16, 32, or 64
Analog and Digital Supply Voltage Range 3.15 V to 3.45 V
Charge Pump and VCO Supply Voltage Range 4.75 V to 5.25 V
Control Interface 3-wire serial interface
Output Muting Pin-controllable and software-controllable
Power-Down Modes Hardware and software controllable
Gambaran Suhu Operasi -40°C to +85°C
Kemasan 32-lead WFQFN with exposed pad
Jenis Pemasangan Surface mount
Loop Filter External
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_qualified

Panduan Konfigurasi Pin ADF5356BCPZ-RL7 32-lead wfqfn with exposed pad

Konfigurasi pin untuk ADF5356BCPZ-RL7 (32-lead wfqfn with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 32-lead wfqfn with exposed pad untuk ADF5356BCPZ-RL7

Tiada data garisan pin yang diperoleh untuk ADF5356BCPZ-RL7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADF5356BCPZ-RL7 patut untuk 6 aplikasis: Microwave Communication LoCs, RF Test and Measurement, Industrial Radar and Sensing, Wireless Infrastructure, Frequency Conversion Loops, Clock and Reference Distribution.

🌐

Microwave Communication LoCs

The ADF5356BCPZ-RL7 is suitable for generating microwave local-oscillator signals in communication equipment because its fundamental VCO covers 3400 MHz to 6800 MHz and the 13.6 GHz maximum characterized frequency provides additional range for RF architectures. The integrated PLL can use fractional-N or integer-N operation with an external reference and loop filter. Divide-by-1 through divide-by-64 paths allow the same synthesizer to serve multiple RF output requirements when the chosen channel supports them. RF output muting provides isolation control, while the 32-lead WFQFN exposed-pad package supports compact RF board layouts. The designer must still verify phase noise, output power, reference ratio, and spur requirements against the receiver or transmitter specification.

🔧

RF Test and Measurement

The ADF5356BCPZ-RL7 can serve as the programmable microwave oscillator in RF test equipment, signal generators, and measurement front ends. Its 3400 MHz to 6800 MHz VCO range covers common microwave test frequencies, and programmable division extends the available output plan down to 53.125 MHz where appropriate. The 3-wire interface permits integration with laboratory and embedded control systems, while pin and software muting support controlled measurement states. A stable external reference and carefully designed loop filter are essential to phase-noise performance and settling behavior. The exposed pad and separate VCO and charge-pump supplies require careful thermal and decoupling layout. The evaluation board provides a useful baseline for RF routing, reference conditioning, and initial phase-lock validation.

🏭

Industrial Radar and Sensing

The ADF5356BCPZ-RL7 fits industrial radar and RF sensing systems that require a compact, programmable microwave source with multiple output-divider options. Its 3400 MHz to 6800 MHz fundamental range supports common RF synthesis bands, and the maximum characterized frequency of 13.6 GHz extends design flexibility. The -40°C to +85°C operating range is appropriate for industrial equipment when the complete system maintains suitable enclosure and thermal conditions. Output muting can help isolate sections of a measurement chain, while hardware and software power-down functions support controlled operating states. Engineers should account for phase-noise degradation, spur content, temperature behavior, reference stability, and the thermal footprint of the exposed pad. External loop-filter and decoupling layouts should follow the manufacturer's evaluation-board guidance.

🌐

Wireless Infrastructure

The ADF5356BCPZ-RL7 can support frequency-generation functions in wireless infrastructure equipment when the target band and channel plan fall within its VCO and divider capabilities. Its programmable PLL provides a practical way to derive coherent outputs from a common reference, while the separate analog, digital, VCO, and charge-pump supply domains support structured power management. Pin and software mute functions provide useful isolation and test controls, and the 3-wire control interface simplifies connection to embedded backplane or monitoring controllers. For infrastructure equipment, designers should assess long-term reference drift, phase-noise requirements, channel spacing, spur performance, and redundancy behavior. The RF output path also needs controlled impedance and careful separation from high-power amplifier and switching circuitry.

📡

Frequency Conversion Loops

The ADF5356BCPZ-RL7 is appropriate for local-oscillator generation within RF frequency-conversion chains because it combines a wideband VCO with selectable RF output dividers and programmable PLL operation. The 3400 MHz to 6800 MHz VCO fundamental can be combined with divide-by-1 through divide-by-64 paths to address different mixer requirements. Integer-N operation may suit fixed-ratio designs, while fractional-N operation can provide finer frequency selection when the reference and loop filter are designed accordingly. Hardware and software mute functions help manage signal-chain states, but connector isolation and return-path design remain critical at microwave frequencies. Validate mixer drive level, harmonic rejection, unwanted sidebands, phase noise, and temperature drift across the intended operating range. The exposed-pad package also requires an effective thermal path to sustain RF performance.

🖥️

Clock and Reference Distribution

The ADF5356BCPZ-RL7 can be used where a system requires a coherent, programmable clock derived from a stable external reference rather than a simple fixed-frequency oscillator. Its PLL architecture supports both integer-N and fractional-N synthesis, while the available divider paths permit output planning from the 3400 MHz to 6800 MHz VCO range. The programmable mute and power-down functions are useful when multiple downstream receivers must be isolated or placed into low-power states. Because the device is fundamentally a microwave PLL/VCO rather than a conventional low-frequency clock generator, the design must account for output jitter, reference multiplication, loop bandwidth, and board-level RF behavior. Use the evaluation platform to confirm settling time and spectral performance before integrating a production distribution network.

Ringkasan Produk Disebarkan

ADF5356BCPZ Analog Devices Dipergunakan di: Microwave Communication LoCs, RF Test and Measurement, Industrial Radar and Sensing, Wireless Infrastructure, Frequency Conversion Loops, Clock and Reference Distribution EVAL-ADF5356 Frequency-synthesizer evaluation platform Dipergunakan di: Microwave Communication LoCs, RF Test and Measurement, Industrial Radar and Sensing, Wireless Infrastructure, Frequency Conversion Loops, Clock and Reference Distribution
What is the operating frequency range of the ADF5356BCPZ-RL7?
The ADF5356BCPZ-RL7 has a fundamental VCO range of 3400 MHz to 6800 MHz and a maximum characterized frequency of 13.6 GHz. According to the Analog Devices ADF5356 datasheet, its divide-by-1, 2, 4, 8, 16, 32, and 64 paths also permit RF outputs as low as 53.125 MHz. The applicable lower limit depends on the selected output divider, while the VCO itself remains within the 3400 MHz to 6800 MHz fundamental range.
Where can I download the ADF5356BCPZ-RL7 datasheet PDF?
The official ADF5356BCPZ-RL7 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5356.pdf. The document covers the ADF5356 family, including its fractional-N and integer-N PLL architecture, 3400 MHz to 6800 MHz VCO, power domains, external loop-filter requirements, programming registers, and RF output-divider options. Use the ADF5356 family document when consulting device functions shared by the orderable MPN.
What power supplies does the ADF5356BCPZ-RL7 require?
The ADF5356BCPZ-RL7 uses separate supply ranges for its functional blocks. According to the Analog Devices ADF5356 datasheet and product information, analog and digital power supplies operate from 3.15 V to 3.45 V, while the charge-pump and VCO supplies operate from 4.75 V to 5.25 V. The design should preserve the specified voltage on every domain and use the manufacturer-recommended bypass network and power-up sequence.
How is the ADF5356BCPZ-RL7 programmed?
The ADF5356BCPZ-RL7 is programmed through a 3-wire serial interface using the register sequence described in the Analog Devices ADF5356 datasheet. Registers control reference and feedback division, output frequency, output selection, calibration, mute behavior, and power state. The device also requires an external reference frequency and an external loop filter, so firmware work includes both register initialization and frequency-update sequences.
What can replace the ADF5356BCPZ-RL7 on the same PCB?
The closest identified drop-in choices are the ADF5356BCPZ and ADF5355BCPZ-family devices, each requiring a final compatibility check against the implemented register sequence and board functions. The ADF5356BCPZ is the closest match because it uses the same 32-lead WFQFN exposed-pad hardware family. The ADF5355 family appears in Analog Devices application note AN-1460 as an upgrade path, but its initialization requirements include differences associated with Register 13.
Is ADF5356BCPZ-RL7 the same as ADF5356BCPZ?
The ADF5356BCPZ-RL7 and ADF5356BCPZ identify orderable forms of the same ADF5356 device family and are listed with the same 32-lead WFQFN exposed-pad package. Their ordering suffixes can represent commercial packing or delivery conditions rather than a different silicon function. Confirm the manufacturer ordering information, tape orientation, moisture level, and reel configuration before treating one as an interchangeable procurement option.
ADF5356BCPZ-RL7 vs ADF5355BCPZ-RL7: which is better for a microwave PLL?
The ADF5356BCPZ-RL7 is generally the better choice for a new 3400 MHz to 6800 MHz fundamental-VCO design because Analog Devices documents ADF5356 as an upgrade of ADF5355 and adds the ADF5356-specific Register 13 initialization. Both families provide integrated microwave VCO and PLL functions, but the choice is not determined by frequency alone. Review AN-1460, the external loop-filter design, output-divider requirements, and the existing firmware before replacing an ADF5355-based board.
When should I choose the ADF5356BCPZ-RL7 over the ADF5355 family?
Choose the ADF5356BCPZ-RL7 when the design benefits from its 3400 MHz to 6800 MHz fundamental VCO, 13.6 GHz maximum characterized frequency, and documented upgrade path from ADF5355. It is particularly relevant to new microwave communication, instrumentation, radar, and frequency-conversion platforms where the additional ADF5356 register and revised initialization sequence can be integrated from the outset. Retain the ADF5355 family only when an existing platform has been thoroughly validated against the changes in AN-1460.
Is the ADF5356BCPZ-RL7 suitable for industrial RF applications?
The ADF5356BCPZ-RL7 is suitable for commercial and industrial RF applications operated within its documented -40°C to +85°C temperature range. Its integrated PLL and wideband VCO are appropriate for communication equipment, test instruments, industrial sensing, and local-oscillator generation. The device is not identified as an AEC-Q100-qualified automotive part, so automotive production designs require separate qualification and an appropriately specified variant.
Where can I buy the ADF5356BCPZ-RL7 and check its lead time?
Use the Request a Quote form on this page to request the ADF5356BCPZ-RL7, current lead time, available package option, and quantity requirements. The form gives purchasing teams a single route for commercial confirmation without relying on static catalog pricing. Production planners should also confirm the reel configuration, moisture level, date code, and delivery schedule when requesting a quotation.
What is the price of the ADF5356BCPZ-RL7?
The current commercial price and quantity breaks for the ADF5356BCPZ-RL7 are presented through the Request a Quote form on this page. Submit the required quantity, target reel packaging, and delivery location to obtain a current quotation. For engineering comparisons, the component's main selection criteria should remain its PLL architecture, VCO range, supply requirements, pin compatibility, and register compatibility.
Is the ADF5356BCPZ-RL7 currently in stock?
Current stock status should be confirmed through the Request a Quote form on this page because inventory can change independently of the technical specification. The form accepts the required quantity and package details needed for an allocation response. Buyers should avoid treating a catalog listing or prior availability indication as a firm stock reservation, particularly for production quantities.
What are the key specifications of ADF5356BCPZ-RL7 that engineers should know?
The ADF5356BCPZ-RL7 combines a 3400 MHz to 6800 MHz fundamental VCO with a maximum characterized frequency of 13.6 GHz in a 32-lead WFQFN exposed-pad package. According to the Analog Devices datasheet, it supports fractional-N and integer-N PLL operation, outputs down to 53.125 MHz through programmable dividers, separate 3.15 V to 3.45 V and 4.75 V to 5.25 V supply domains, 3-wire control, pin and software mute, and hardware and software power-down.
Can I use ADF5356BCPZ-RL7 for a 5 GHz local oscillator?
The ADF5356BCPZ-RL7 can support a 5 GHz output because 5000 MHz lies within its 3400 MHz to 6800 MHz fundamental VCO range. The actual output must be programmed through the PLL and divider registers and must satisfy the reference, loop-filter, output-power, and phase-noise requirements of the complete design. Confirm that 5 GHz is an allowed output channel for the intended operating mode and calculate the required reference and feedback ratios.
What design constraints matter most when laying out the ADF5356BCPZ-RL7 PCB?
The critical layout tasks are stable supply decoupling, a correctly designed external loop filter, controlled RF impedance, and effective grounding of the exposed thermal pad. According to the Analog Devices ADF5356 datasheet, the loop filter and reference network are external, making their component values and placement central to PLL performance. Keep switching regulators and high-current digital paths away from the VCO and RF output region, and use the evaluation board as a starting point for controlled-impedance layout.

Data referensi kejuruteraan untuk ADF5356BCPZ-RL7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADF5356BCPZ-RL7 for a new microwave PLL design requiring a 3400 MHz to 6800 MHz fundamental VCO, programmable RF dividers, fractional-N or integer-N operation, and separate supply domains. Choose the ADF5356BCPZ when it is the preferred ordering form for the intended packing and delivery configuration, while confirming that its commercial terms match the required reel format. Consider ADF5355BCPZ-RL7 or ADF5355BCPZ only for an existing ADF5355 platform whose board and firmware can be validated against Analog Devices application note AN-1460. The predecessor is not a casual firmware substitution because the ADF5356 initialization sequence adds Register 13. For any option, verify phase noise, spurs, settling behavior, reference ratio, loop-filter design, supply sequencing, RF impedance, and the exposed-pad thermal path. The ADF5356 family is the stronger starting point for new designs; the ADF5355 family is primarily a controlled migration path.

Perbandingan dengan Gantian

Parametr Produk Ini ADF5356BCPZ ADF5355BCPZ-RL7 ADF5355BCPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad 32-lead WFQFN with exposed pad
PLL Architecture Fractional-N or integer-N Fractional-N or integer-N Fractional-N or integer-N Fractional-N or integer-N
Special Features Pin and software mute; hardware and software power-down; programmable RF output dividers Pin and software mute; hardware and software power-down; programmable RF output dividers ADF5355 predecessor; migration requires revised initialization ADF5355 predecessor; migration requires revised initialization

Penyeberangsung Jelas

  • Broad fundamental VCO range (vsADF5355BCPZ-RL7)
  • Programmable low-frequency RF output path (vsADF5356BCPZ)
  • Documented migration path from the preceding family (vsADF5355BCPZ)

Catatan Desain

Use the Analog Devices ADF5356 evaluation-board layout as the baseline for the reference input, loop filter, supply bypass network, RF output routing, and exposed-pad connection. The loop filter and reference components influence loop dynamics, settling time, phase noise, and spurious signals. Keep these networks close to their associated pins, use a continuous ground reference, and avoid routing sensitive RF traces beneath or beside switching-converter nodes.

Separate the 3.15 V to 3.45 V analog/digital supply from the 4.75 V to 5.25 V charge-pump and VCO supply according to the manufacturer power architecture. Place the recommended high-frequency decoupling capacitors directly at the supply pins and maintain short return paths. Verify startup and shutdown sequencing, supply ripple at the VCO, and voltage margins across temperature before evaluating final phase-noise and output-power performance.

Thermal design for the ADF5356BCPZ-RL7 must include the exposed pad because the 32-lead WFQFN relies on its underside for heat dissipation. Attach the pad to a continuous ground or thermal plane using the manufacturer-recommended via pattern and observe the layout and assembly requirements for the exposed pad. Exact junction-temperature limits, package thermal resistance, and power dissipation should be taken from the ADF5356 datasheet rather than inferred from nominal supply voltage.

Do not treat a shared WFQFN outline as proof of complete software compatibility. When moving from ADF5355 to ADF5356, Analog Devices application note AN-1460 identifies the need for revised initialization and the addition of Register 13. Verify divider limits, mute behavior, reference configuration, power state, loop-filter values, and expected output frequency on hardware before releasing a replacement into production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The ADF5356BCPZ-RL7 has a documented -40°C to +85°C operating range but is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADF5356BCPZ-RL7 datasheet ADF5356BCPZ-RL7 pinout ADF5356BCPZ-RL7 datasheet pdf ADF5356BCPZ-RL7 equivalent ADF5356BCPZ-RL7 replacement ADF5356BCPZ-RL7 price ADF5356BCPZ-RL7 stock Analog Devices ADF5356BCPZ-RL7 ADF5356BCPZ-RL7 vs ADF5355BCPZ-RL7 ADF5356BCPZ 13.6GHz WFQFN ADF5356BCPZ 3400 6800 MHz VCO ADF5356BCPZ fractional-N synthesizer ADF5356BCPZ application circuit ADF5356BCPZ WFQFN-32 footprint ADF5356BCPZ loop filter design

Komponen dan Tanda berkaitan

Analog Devices ADF5356BCPZ-RL7 ADF5356BCPZ ADF5355BCPZ-RL7 ADF5355BCPZ ADF5356 ADF5355 PLL frequency synthesizer fractional-N PLL integer-N PLL microwave VCO wideband VCO clock synthesizer frequency synthesizer integrated timing IC semiconductor 3-wire serial interface external loop filter programmable RF divider phase noise RF output muting charge-pump supply VCO supply 32-lead WFQFN QFN family surface mount SMD
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ