ADF5356BCPZ-RL7 - 13.6 GHz PLL/VCO Synthesizer | Analog Devices
Артикул: ADF5356BCPZ-RL7 ✓ АктивенADF5356BCPZ-RL7 Обзор
A frequency synthesizer is a timing and RF signal-generation component that locks a high-frequency voltage-controlled oscillator to a stable external reference. Its internal hierarchy includes a PLL frequency synthesizer, a wideband microwave VCO, a clock synthesizer, and ultimately an integrated timing or RF signal-generation semiconductor. The reference input and internal feedback establish the closed-loop relationship between the programmed output frequency and the external reference, while an external loop filter controls loop dynamics.
The ADF5356 supports programmable division through divide-by-1, 2, 4, 8, 16, 32, and 64 paths. It provides three-wire register control, programmable output muting available through both pins and software, and hardware and software power-down modes. These features allow the frequency, output routing, reference behavior, calibration state, and power state to be configured through the device register map. The -40°C to +85°C operating range supports industrial and commercial equipment rather than automotive-qualified installations.
Its 3400 MHz to 6800 MHz fundamental VCO range covers major microwave bands while divider-based operation extends the usable output range toward lower RF frequencies. This architecture is useful when a system needs a single synthesizer to produce multiple related output frequencies, particularly where an external reference and programmable phase-locked loop provide predictable frequency relationships. The 13.6 GHz figure identifies the maximum characterized device or output capability rather than the fundamental VCO range.
Typical applications include microwave and millimeter-wave communication equipment, wireless infrastructure, test and measurement instruments, industrial radar and sensing systems, frequency conversion chains, and local oscillators. The integrated VCO reduces the number of discrete microwave components required to establish an RF output. Its programmable divider paths also make the device suitable for low-frequency phase-locked outputs when the required output can be derived from the 3400 MHz to 6800 MHz VCO fundamental.
The external loop filter, reference interface, decoupling network, RF output routing, and exposed thermal pad require careful PCB implementation. Power sequencing must accommodate separate analog, digital, VCO, and charge-pump supply domains. RF trace impedance, return paths, output matching, and isolation from switching circuitry are equally important because a stable PLL does not compensate for poor grounding, supply noise, or mismatched transmission lines.
This page combines the manufacturer specifications, functional architecture, drop-in migration options, application guidance, and PCB-design considerations needed to evaluate the ADF5356BCPZ-RL7. It also highlights the device's role within the broader PLL and microwave frequency-synthesizer category, helping engineers distinguish direct replacements from alternatives that require different register sequences or board-level redesign.
Аналоги без доработки для ADF5356BCPZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADF5356BCPZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Package, Loop Filter, Output Mute Control, Power-Down Modes, Product Type.
ADF5356BCPZ
✅ Прямая заменаУточнить цену
Открыть даташит →ADF5355BCPZ-RL7
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ADF5355BCPZ
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ADF5356BCPZ-RL7 Характеристики
| Maximum Characterized Frequency | 13.6 GHz |
| VCO Fundamental Frequency Range | 3400 MHz to 6800 MHz |
| Minimum RF Output Frequency | 53.125 MHz |
| PLL Architecture | Fractional-N or integer-N |
| Available Divider Paths | Divide by 1, 2, 4, 8, 16, 32, or 64 |
| Analog and Digital Supply Voltage Range | 3.15 V to 3.45 V |
| Charge Pump and VCO Supply Voltage Range | 4.75 V to 5.25 V |
| Control Interface | 3-wire serial interface |
| Output Muting | Pin-controllable and software-controllable |
| Power-Down Modes | Hardware and software controllable |
| Диапазон рабочих температур | -40°C to +85°C |
| Корпус | 32-lead WFQFN with exposed pad |
| Тип монтажа | Surface mount |
| Loop Filter | External |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_qualified |
Руководство по цоколевке ADF5356BCPZ-RL7 в корпусе 32-lead wfqfn with exposed pad
Цоколевка для ADF5356BCPZ-RL7 (корпус 32-lead wfqfn with exposed pad). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ADF5356BCPZ-RL7.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADF5356BCPZ-RL7 подходит для 6 применениеs: Microwave Communication LoCs, RF Test and Measurement, Industrial Radar and Sensing, Wireless Infrastructure, Frequency Conversion Loops, Clock and Reference Distribution.
Microwave Communication LoCs
The ADF5356BCPZ-RL7 is suitable for generating microwave local-oscillator signals in communication equipment because its fundamental VCO covers 3400 MHz to 6800 MHz and the 13.6 GHz maximum characterized frequency provides additional range for RF architectures. The integrated PLL can use fractional-N or integer-N operation with an external reference and loop filter. Divide-by-1 through divide-by-64 paths allow the same synthesizer to serve multiple RF output requirements when the chosen channel supports them. RF output muting provides isolation control, while the 32-lead WFQFN exposed-pad package supports compact RF board layouts. The designer must still verify phase noise, output power, reference ratio, and spur requirements against the receiver or transmitter specification.
Рекомендуется
RF Test and Measurement
The ADF5356BCPZ-RL7 can serve as the programmable microwave oscillator in RF test equipment, signal generators, and measurement front ends. Its 3400 MHz to 6800 MHz VCO range covers common microwave test frequencies, and programmable division extends the available output plan down to 53.125 MHz where appropriate. The 3-wire interface permits integration with laboratory and embedded control systems, while pin and software muting support controlled measurement states. A stable external reference and carefully designed loop filter are essential to phase-noise performance and settling behavior. The exposed pad and separate VCO and charge-pump supplies require careful thermal and decoupling layout. The evaluation board provides a useful baseline for RF routing, reference conditioning, and initial phase-lock validation.
Рекомендуется
Industrial Radar and Sensing
The ADF5356BCPZ-RL7 fits industrial radar and RF sensing systems that require a compact, programmable microwave source with multiple output-divider options. Its 3400 MHz to 6800 MHz fundamental range supports common RF synthesis bands, and the maximum characterized frequency of 13.6 GHz extends design flexibility. The -40°C to +85°C operating range is appropriate for industrial equipment when the complete system maintains suitable enclosure and thermal conditions. Output muting can help isolate sections of a measurement chain, while hardware and software power-down functions support controlled operating states. Engineers should account for phase-noise degradation, spur content, temperature behavior, reference stability, and the thermal footprint of the exposed pad. External loop-filter and decoupling layouts should follow the manufacturer's evaluation-board guidance.
Рекомендуется
Wireless Infrastructure
The ADF5356BCPZ-RL7 can support frequency-generation functions in wireless infrastructure equipment when the target band and channel plan fall within its VCO and divider capabilities. Its programmable PLL provides a practical way to derive coherent outputs from a common reference, while the separate analog, digital, VCO, and charge-pump supply domains support structured power management. Pin and software mute functions provide useful isolation and test controls, and the 3-wire control interface simplifies connection to embedded backplane or monitoring controllers. For infrastructure equipment, designers should assess long-term reference drift, phase-noise requirements, channel spacing, spur performance, and redundancy behavior. The RF output path also needs controlled impedance and careful separation from high-power amplifier and switching circuitry.
Рекомендуется
Frequency Conversion Loops
The ADF5356BCPZ-RL7 is appropriate for local-oscillator generation within RF frequency-conversion chains because it combines a wideband VCO with selectable RF output dividers and programmable PLL operation. The 3400 MHz to 6800 MHz VCO fundamental can be combined with divide-by-1 through divide-by-64 paths to address different mixer requirements. Integer-N operation may suit fixed-ratio designs, while fractional-N operation can provide finer frequency selection when the reference and loop filter are designed accordingly. Hardware and software mute functions help manage signal-chain states, but connector isolation and return-path design remain critical at microwave frequencies. Validate mixer drive level, harmonic rejection, unwanted sidebands, phase noise, and temperature drift across the intended operating range. The exposed-pad package also requires an effective thermal path to sustain RF performance.
Рекомендуется
Clock and Reference Distribution
The ADF5356BCPZ-RL7 can be used where a system requires a coherent, programmable clock derived from a stable external reference rather than a simple fixed-frequency oscillator. Its PLL architecture supports both integer-N and fractional-N synthesis, while the available divider paths permit output planning from the 3400 MHz to 6800 MHz VCO range. The programmable mute and power-down functions are useful when multiple downstream receivers must be isolated or placed into low-power states. Because the device is fundamentally a microwave PLL/VCO rather than a conventional low-frequency clock generator, the design must account for output jitter, reference multiplication, loop bandwidth, and board-level RF behavior. Use the evaluation platform to confirm settling time and spectral performance before integrating a production distribution network.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADF5356BCPZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADF5356BCPZ | ADF5355BCPZ-RL7 | ADF5355BCPZ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad | 32-lead WFQFN with exposed pad |
| PLL Architecture | Fractional-N or integer-N | Fractional-N or integer-N | Fractional-N or integer-N | Fractional-N or integer-N |
| Special Features | Pin and software mute; hardware and software power-down; programmable RF output dividers | Pin and software mute; hardware and software power-down; programmable RF output dividers | ADF5355 predecessor; migration requires revised initialization | ADF5355 predecessor; migration requires revised initialization |
Ключевые отличия
- Broad fundamental VCO range (против ADF5355BCPZ-RL7)
- Programmable low-frequency RF output path (против ADF5356BCPZ)
- Documented migration path from the preceding family (против ADF5355BCPZ)
Заметки по проектированию
Use the Analog Devices ADF5356 evaluation-board layout as the baseline for the reference input, loop filter, supply bypass network, RF output routing, and exposed-pad connection. The loop filter and reference components influence loop dynamics, settling time, phase noise, and spurious signals. Keep these networks close to their associated pins, use a continuous ground reference, and avoid routing sensitive RF traces beneath or beside switching-converter nodes.
Separate the 3.15 V to 3.45 V analog/digital supply from the 4.75 V to 5.25 V charge-pump and VCO supply according to the manufacturer power architecture. Place the recommended high-frequency decoupling capacitors directly at the supply pins and maintain short return paths. Verify startup and shutdown sequencing, supply ripple at the VCO, and voltage margins across temperature before evaluating final phase-noise and output-power performance.
Thermal design for the ADF5356BCPZ-RL7 must include the exposed pad because the 32-lead WFQFN relies on its underside for heat dissipation. Attach the pad to a continuous ground or thermal plane using the manufacturer-recommended via pattern and observe the layout and assembly requirements for the exposed pad. Exact junction-temperature limits, package thermal resistance, and power dissipation should be taken from the ADF5356 datasheet rather than inferred from nominal supply voltage.
Do not treat a shared WFQFN outline as proof of complete software compatibility. When moving from ADF5355 to ADF5356, Analog Devices application note AN-1460 identifies the need for revised initialization and the addition of Register 13. Verify divider limits, mute behavior, reference configuration, power state, loop-filter values, and expected output frequency on hardware before releasing a replacement into production.
Информация о соответствии
The ADF5356BCPZ-RL7 has a documented -40°C to +85°C operating range but is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration.