Analog Devices

ADM211EARSZ - 5V 4/5 RS-232 Transceiver | Analog Devices

MPN: ADM211EARSZ ✓ Aktif
4.5 V to 5.5 V Vdss EIA-232E and CCITT V.28 Rds(on) 28-pin SSOP Package
MOQ: 1 |

ADM211EARSZ Ringkasan

The Analog Devices ADM211EARSZ is a single-supply RS-232 line-driver and receiver transceiver with four drivers, five receivers, a 4.5 V to 5.5 V supply range, and operation up to 230 kbps. It is packaged in a 28-pin SSOP and provides ±15 kV electrostatic-discharge protection for interfaces exposed to industrial and commercial cabling environments.

An RS-232 transceiver is an interface IC that converts logic-level signals into balanced, single-ended RS-232 line levels and converts received line signals back into CMOS-compatible logic. It belongs to the interface IC hierarchy, where transceivers combine line drivers and receivers in one package. The ADM211 family supports EIA-232E and CCITT V.28 signaling while reducing the number of separate components required for multi-channel serial links.

The device includes four transmit channels and five receive channels, allowing a design to support several unidirectional or bidirectional RS-232 connections. Its single 5 V supply architecture simplifies power sequencing and works with contemporary CMOS logic. External supply bypassing is specified at 0.1 µF, while the charge-pump and driver arrangement provides the bipolar voltage levels required by RS-232 without a separate bipolar supply.

The ADM211E family is designed for harsh electrical environments and provides EMI/EMC-focused protection. Published system information identifies conformance with the EIA-232E and CCITT V.28 specifications, data rates up to 230 kbps, and enhanced ESD protection relative to earlier ADM211 variants. These characteristics are particularly useful where cables leave an enclosure and may be exposed to electrostatic discharge, conducted noise, or long interconnects.

Typical uses include industrial serial controllers, instrumentation links, point-of-sale equipment, test and measurement systems, and embedded data-acquisition equipment. The five receiver channels can handle data, control, status, or handshake signals, while the four driver channels support outbound data and control paths. The extra receiver is useful for monitoring an incoming source or implementing a bus arrangement with one shared line and several local receivers.

PCB design should preserve the manufacturer’s recommended charge-pump capacitor connections and place the 0.1 µF supply capacitor close to the device. RS-232 driver outputs must not be confused with TTL or CMOS outputs, and unused channels require appropriate termination according to the interface circuit. Verify signal polarity, direction, and receiver enable behavior against the ADM211E pin description before releasing a production layout.

This product page combines the manufacturer’s family-level specifications with exact package and ordering information for ADM211EARSZ, structured drop-in comparisons, practical interface-layout guidance, and searchable RS-232 design information. It is intended to help engineers identify the correct channel count, package, protection level, and replacement before beginning PCB implementation.

Pilihan pengganti yang segera untuk ADM211EARSZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADM211EARSZ (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, Supply Voltage, Maximum Data Rate, Driver Count.

Analog Devices
Product Type: RS-232 transceiver
Supply Voltage: 5 V
Maximum Data Rate: 200 kbps
Bandingkan Dengan ADM211EARSZ →
Analog Devices
Product Type: RS-232 and V.28 interface transceiver
Package: 28-pin SOIC
Supply Voltage: +5 V
Bandingkan Dengan ADM211EARSZ →
Analog Devices
Product Type: RS-232 transceiver
Package: 28-lead SSOP
Supply Voltage: 5 V
Bandingkan Dengan ADM211EARSZ →
Analog Devices
Product Type: RS-232 line transceiver
Package: 28-SSOP
Supply Voltage: +5 V
Bandingkan Dengan ADM211EARSZ →
Analog Devices
Product Type: RS-232 line driver/receiver transceiver
Supply Voltage: 5 V
Maximum Data Rate: 200 kbps
Bandingkan Dengan ADM211EARSZ →

ADM211EARS

✅ Masuk Drop-In
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 4 drivers · 5 receivers · 5 V · 200 kbps · EIA-232-E and CCITT V.28 · 28-lead SSOP · Surface mount

Hubungi untuk harga

Lihat Datasheet →

ADM211ARSZ

✅ Masuk Drop-In
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 4 channels · 5 channels · 5 V · 200 kbps · 0.1 uF · EIA-232-E and V.28 · CMOS

Hubungi untuk harga

Lihat Datasheet →

ADM211EARSZ Spesifikasi

Product Type RS-232 line-driver and receiver transceiver
Number of Drivers 4
Number of Receivers 5
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Maximum Data Rate 230 kbps
External Supply Capacitor 0.1 µF
RS-232 Standards EIA-232E and CCITT V.28
Contact ESD Protection ±8 kV
Air-Gap ESD Protection ±15 kV
Human-Body-Model ESD Protection ±15 kV
Kemasan 28-pin SSOP
Package Width 5.30 mm
Package Body Width 0.209 inch
Packaging Tube

Panduan Konfigurasi Pin ADM211EARSZ 0.209 inch

Konfigurasi pin untuk ADM211EARSZ (0.209 inch pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 0.209 inch untuk ADM211EARSZ

Tiada data garisan pin yang diperoleh untuk ADM211EARSZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADM211EARSZ patut untuk 6 aplikasis: Industrial RS-232 Instrumentation, Embedded Serial Port Expansion, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Secure Terminal and Access Equipment.

🏭

Industrial RS-232 Instrumentation

The ADM211EARSZ fits industrial instrumentation that exchanges several low-speed commands and measurements over RS-232. Its four drivers can carry outbound data, control, and handshake signals, while five receivers accept incoming status or monitor signals. The 4.5 V to 5.5 V operating range matches 5 V controller rails, and the ±15 kV air-gap and human-body-model ESD ratings add protection where cables connect to field-accessible equipment. Analog Devices specifies EIA-232E and CCITT V.28 operation up to 230 kbps, making the device suitable for legacy test instruments and industrial controllers that rely on stable single-ended serial signaling.

🔧

Embedded Serial Port Expansion

ADM211EARSZ can expand a microcontroller or embedded controller that has too few serial interfaces for legacy equipment. A 5 V logic domain can drive four RS-232 outputs, while five receiver inputs accommodate data, status, and hardware-handshake lines from a peripheral or adapter. Operation up to 230 kbps covers many RS-232 peripherals without requiring a modern differential interface. The 28-pin SSOP is suitable for compact industrial controller boards, while enhanced ESD ratings help protect cable-connected ports. The PCB designer should preserve the manufacturer’s capacitor placement and verify connector-side protection and ground strategy.

🔧

Test and Measurement Equipment

The ADM211EARSZ is appropriate for test instruments that communicate with older bench equipment, laboratory computers, or service interfaces through RS-232. Four driver outputs support command transmission and remote-control signals, and five receivers provide flexibility for data, status, and busy indicators. Its 230 kbps maximum rate is consistent with conventional RS-232 instrumentation links. The 5 V supply requirement allows straightforward integration with CMOS control logic, and the enhanced ESD protection is valuable when users repeatedly attach and detach test leads. Keep the analog and digital return paths well controlled and place bypass capacitance close to the device.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale or retail peripheral can use ADM211EARSZ when it must support an RS-232 customer display, printer, scanner, or service terminal. Multiple drivers and receivers let one transceiver handle both command output and input-handshake signals without duplicating driver packages. The 4.5 V to 5.5 V supply range is compatible with 5 V embedded systems, and the device’s single-supply operation simplifies power design. EIA-232E and V.28 support cover the legacy signaling expected by many peripherals. Enhanced ESD protection adds robustness for exposed cables, although designers should still use shielded cable where required and keep the interface ground reference consistent with the connected equipment.

📡

Data Acquisition Equipment

ADM211EARSZ can provide the host-to-instrument interface in a data-acquisition system that collects measurements from legacy sensors or laboratory modules. The four transmitters can send configuration commands and synchronization signals, while five receivers can collect output data, alarms, and ready-status indicators. A maximum rate of 230 kbps supports many low-to-moderate-rate acquisition paths while avoiding the higher complexity of differential buses. The 28-pin SSOP conserves board area, and the enhanced ESD rating improves resilience to user-accessible cables. Validate cable length against the selected baud rate and follow the manufacturer’s charge-pump capacitor layout for repeatable operation.

🛡️

Secure Terminal and Access Equipment

The ADM211EARSZ fits access-control or secure-terminal equipment that connects to a controller through an RS-232 service port. Its multiple channels allow command, response, and status traffic to share a compact interface implementation, while the 5 V supply operation supports typical embedded controller rails. The device’s enhanced ±15 kV air-gap and human-body-model ESD protection is particularly relevant to service connectors that may be touched during installation. RS-232 remains a point-to-point interface, so the transmitter and receiver directions must be assigned carefully. Use a common signal ground where permitted by the connected equipment and validate the complete interface against the system security and EMC requirements.

Ringkasan Produk Disebarkan

ADM211EARS Analog Devices Dipergunakan di: Industrial RS-232 Instrumentation, Embedded Serial Port Expansion, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Secure Terminal and Access Equipment ADM211ARS Standard-protection same-family transceiver Dipergunakan di: Industrial RS-232 Instrumentation, Embedded Serial Port Expansion, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Secure Terminal and Access Equipment
What is the operating voltage of ADM211EARSZ?
The ADM211EARSZ operates from a single 4.5 V to 5.5 V supply, with 5 V as the nominal operating condition. According to the Analog Devices ADM211E product information, the device is a +5 V CMOS RS-232 interface. The manufacturer specifies a 0.1 µF external charge-pump capacitor, which should be placed close to the corresponding device pin in the final PCB layout.
How many RS-232 drivers and receivers does ADM211EARSZ have?
The ADM211EARSZ contains four RS-232 drivers and five receivers. The manufacturer product information identifies the ADM211 family as a four-driver, five-receiver transceiver arrangement. This channel mix supports several outbound data or control signals while providing one extra receiver for incoming status, handshake, monitoring, or shared-bus applications within the same 28-pin SSOP package.
What is the maximum data rate of ADM211EARSZ?
The ADM211E family operates at data rates up to 230 kbps. Analog Devices states that its devices conform to the EIA-232E and CCITT V.28 specifications. This rate is suitable for conventional point-to-point RS-232 links, including legacy serial peripherals, industrial controllers, and instrumentation, provided the connected equipment and cable arrangement support the same signaling bandwidth.
Where can I download the ADM211EARSZ datasheet?
The official ADM211E product page at analog.com provides the manufacturer datasheet and product documentation for the family containing ADM211EARSZ. Use the manufacturer’s Data Sheet, Rev. D and the pin-description table for final wiring and electrical-limit checks. The package drawing and ordering information should also be matched to the exact 28-pin SSOP suffix, ADM211EARSZ.
Where can I find the ADM211EARSZ pinout?
The ADM211EARSZ pinout is found in the pin-description table and package drawing in the Analog Devices ADM211E manufacturer datasheet. The exact 28-pin SSOP pin assignments, including driver outputs, receiver inputs, supply, ground, charge-pump capacitor, and enable functions, must be taken from that table. Use the datasheet assignments when assigning PCB tracks and connector signals.
What ESD protection does ADM211EARSZ provide?
The ADM211EARSZ provides enhanced electrostatic-discharge protection rated at ±15 kV for air-gap discharge and human-body-model discharge, plus ±8 kV for contact discharge. The published protection levels reflect the E suffix’s enhanced protection relative to the standard ADM211. These ratings apply to the specified test methods and should be considered alongside cable routing and connector protection.
Can ADM211EARSZ replace ADM211EARS?
The ADM211EARSZ can serve as the ESD-enhanced version of the 28-pin SSOP ADM211EARS when the PCB footprint and required protection level match. Both provide four drivers, five receivers, a 4.5 V to 5.5 V supply, and RS-232 operation. Confirm the exact pin assignments and shutdown or enable behavior in the manufacturer datasheet before approving the substitution for production.
What is the best drop-in replacement for ADM211EARSZ?
The closest documented same-brand drop-in choice is ADM211EARS, which uses the same 28-pin SSOP format and four-driver, five-receiver RS-232 architecture. The principal distinction is protection: the ADM211EARSZ provides enhanced ESD performance, while the standard ADM211 variant offers less robust transient protection. A substitution is appropriate only when the original board does not require the enhanced E-version protection.
What can replace ADM211EARSZ on an existing PCB?
An existing ADM211EARSZ board can generally be evaluated for replacement with ADM211EARS because both are 28-pin SSOP devices with four drivers, five receivers, and the same 4.5 V to 5.5 V supply class. Verify every pin, the required enable or shutdown behavior, and ESD requirements in the manufacturer datasheet. No cross-brand drop-in alternative is established by the available engineering information.
ADM211EARSZ vs ADM211EARS: which is better for industrial equipment?
The ADM211EARSZ is generally the better choice for industrial cabling environments because it adds enhanced ESD protection of ±15 kV for air-gap and human-body-model discharge. The ADM211EARS retains the same 4-driver, 5-receiver RS-232 function and 28-pin SSOP format but has less robust protection. Choose the EARSZ version when field-wired connectors make electrostatic discharge a significant design risk.
When should I choose ADM211EARSZ over ADM211ARS?
Choose ADM211EARSZ when your interface requires the enhanced ESD protection associated with the ADM211E family. The ADM211ARS uses the same 28-pin SSOP RS-232 architecture and supply range, but it is the standard-protection member of the family. The decision should be based on the cable environment, connector exposure, applicable ESD test requirements, and verified pin compatibility.
Is ADM211EARSZ suitable for long RS-232 cable links?
The ADM211EARSZ is suitable for RS-232 links up to 230 kbps when the cable length, baud rate, grounding, and connected equipment meet the EIA-232E and V.28 system requirements. Its four drivers and five receivers support multiple point-to-point or shared-receiver connections. The enhanced ESD rating improves robustness, but it does not eliminate the need for suitable cables, signal conditioning, and grounding.
Where can I buy ADM211EARSZ and check its current lead time?
Use the Request a Quote form on this page to request ADM211EARSZ availability, current lead time, order quantity, and tube packaging requirements. The form allows purchasing engineers to obtain a current supply response without relying on a static price or stale stock statement. Confirm the exact ADM211EARSZ ordering code when submitting the request.
What is the price of ADM211EARSZ?
The current ADM211EARSZ price is presented through the Request a Quote form on this page. Because distributor pricing, stock, and volume breaks can change, the platform does not embed a static price in the technical description. Submit the form with your required quantity and delivery location to receive a current quotation for the exact 28-pin SSOP device.
What are the key specifications of ADM211EARSZ that engineers should know?
The ADM211EARSZ is a 5 V RS-232 transceiver with four drivers, five receivers, a 4.5 V to 5.5 V supply range, and operation up to 230 kbps. It is available in a 28-pin SSOP and provides enhanced ESD protection, including ±15 kV air-gap and human-body-model ratings. Analog Devices identifies conformance with the EIA-232E and CCITT V.28 specifications.
Is ADM211EARSZ compliant with RoHS and REACH?
The current product record does not provide a definitive RoHS or REACH statement for the exact ADM211EARSZ ordering code, so neither status should be assumed. Request the manufacturer’s current material-compliance documentation through the Request a Quote form, or consult the official ADM211E product page and documentation. Environmental qualification must be confirmed for the specific package and manufacturing status.

Data referensi kejuruteraan untuk ADM211EARSZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ADM211EARSZ when a board needs a 5 V RS-232 interface with four drivers, five receivers, operation up to 230 kbps, and enhanced ESD protection in a 28-pin SSOP. It is the stronger choice for field-wired industrial, test, access-control, and data-acquisition ports where cables can receive electrostatic discharge. Choose ADM211EARS when the same footprint and channel count are needed but the port is enclosed and the standard family protection is adequate. Choose ADM211ARS for a standard-protection design that does not require the enhanced E-version ESD rating. No cross-brand drop-in substitute is established by the available information, so any foreign-source device would require a separate review of pin assignments, charge-pump capacitors, enable behavior, supply limits, data rate, and protection ratings before production use.

Perbandingan dengan Gantian

Parametr Produk Ini ADM211EARS ADM211ARS
Brand Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Number of Drivers 4 4 4
Number of Receivers 5 5 5
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Maximum Data Rate 230 kbps 230 kbps 230 kbps
Air-Gap ESD Protection ±15 kV ±8 kV ±8 kV
Human-Body-Model ESD Protection ±15 kV ±8 kV ±8 kV
RS-232 Compliance EIA-232E and CCITT V.28 EIA-232E and CCITT V.28 EIA-232E and CCITT V.28

Penyeberangsung Jelas

  • Higher air-gap ESD withstand rating (vsADM211EARS)
  • Higher human-body-model ESD withstand rating (vsADM211ARS)
  • Maintains the same core RS-232 channel configuration (vsADM211EARS)

Catatan Desain

Place the manufacturer-specified 0.1 µF charge-pump capacitor and the supply bypass capacitor directly beside their associated pins, with short ground returns. Avoid routing RS-232 outputs through long traces beneath sensitive analog circuitry. Keep connector protection and cable shield connections near the board edge, while separating the RS-232 return path from switching-node and high-current return paths.

Assign driver and receiver directions from the manufacturer pin table before laying out the connector. The four transmitters and five receivers support multiple unidirectional links, but unused inputs must be left in valid states and unused outputs must not be connected to active signals. Check that the PCB land pattern is the 28-pin SSOP pattern specified for ADM211EARSZ rather than a 24-pin or wide-body SOIC pattern.

Do not treat the ADM211EARSZ as a TTL-level driver or connect its RS-232 outputs directly to a microcontroller UART without the transceiver. Conversely, do not apply RS-232 bipolar levels to receiver inputs designed for CMOS logic. Confirm whether a connected port uses a DB9-style pin arrangement, an industry-standard RJ45 adapter, or a custom harness because the connector numbering is not necessarily the IC pin numbering.

RS-232 receivers can respond to external cables carrying fast common-mode transients even when the data rate is low. Maintain a low-impedance signal-ground connection according to the interface standard, use appropriately rated cable protection where necessary, and avoid large unprotected stubs on receiver inputs. The enhanced ADM211E ESD ratings improve robustness but do not replace connector-level protection or a sound chassis-ground strategy.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact ADM211EARSZ ordering code has no definitive RoHS, REACH, halogen-free, or conflict-minerals statement in the available manufacturer text. Its enhanced ESD ratings and RS-232 standards compliance do not imply automotive qualification or environmental-material compliance.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

adm211earsz reel ADM211EARSZ datasheet ADM211EARSZ datasheet pdf ADM211EARSZ pinout ADM211EARSZ specifications ADM211EARSZ equivalent ADM211EARSZ replacement ADM211EARSZ vs ADM211EARS ADM211EARSZ 28-SSOP ADM211EARSZ RS-232 transceiver ADM211EARSZ price ADM211EARSZ stock Analog Devices ADM211EARSZ ADM211EARSZ ESD protection

Komponen dan Tanda berkaitan

Analog Devices ADM211EARSZ ADM211EARS ADM211ARS RS-232 RS-232 transceiver line driver line receiver interface IC EIA-232E CCITT V.28 CMOS logic charge pump 28-pin SSOP SSOP package family surface mount ESD protection IEC 1000-4-2 industrial instrumentation data acquisition test and measurement point-of-sale equipment 4.5 V to 5.5 V supply 230 kbps data rate
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ