ADM211EARSZ - 5V 4/5 RS-232 Transceiver | Analog Devices
부품 번호: ADM211EARSZ ✓ 활성ADM211EARSZ 개요
An RS-232 transceiver is an interface IC that converts logic-level signals into balanced, single-ended RS-232 line levels and converts received line signals back into CMOS-compatible logic. It belongs to the interface IC hierarchy, where transceivers combine line drivers and receivers in one package. The ADM211 family supports EIA-232E and CCITT V.28 signaling while reducing the number of separate components required for multi-channel serial links.
The device includes four transmit channels and five receive channels, allowing a design to support several unidirectional or bidirectional RS-232 connections. Its single 5 V supply architecture simplifies power sequencing and works with contemporary CMOS logic. External supply bypassing is specified at 0.1 µF, while the charge-pump and driver arrangement provides the bipolar voltage levels required by RS-232 without a separate bipolar supply.
The ADM211E family is designed for harsh electrical environments and provides EMI/EMC-focused protection. Published system information identifies conformance with the EIA-232E and CCITT V.28 specifications, data rates up to 230 kbps, and enhanced ESD protection relative to earlier ADM211 variants. These characteristics are particularly useful where cables leave an enclosure and may be exposed to electrostatic discharge, conducted noise, or long interconnects.
Typical uses include industrial serial controllers, instrumentation links, point-of-sale equipment, test and measurement systems, and embedded data-acquisition equipment. The five receiver channels can handle data, control, status, or handshake signals, while the four driver channels support outbound data and control paths. The extra receiver is useful for monitoring an incoming source or implementing a bus arrangement with one shared line and several local receivers.
PCB design should preserve the manufacturer’s recommended charge-pump capacitor connections and place the 0.1 µF supply capacitor close to the device. RS-232 driver outputs must not be confused with TTL or CMOS outputs, and unused channels require appropriate termination according to the interface circuit. Verify signal polarity, direction, and receiver enable behavior against the ADM211E pin description before releasing a production layout.
This product page combines the manufacturer’s family-level specifications with exact package and ordering information for ADM211EARSZ, structured drop-in comparisons, practical interface-layout guidance, and searchable RS-232 design information. It is intended to help engineers identify the correct channel count, package, protection level, and replacement before beginning PCB implementation.
드롭인 대체품: ADM211EARSZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADM211EARSZ (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Supply Voltage, Maximum Data Rate, Driver Count.
ADM211EARS
✅ 드롭인가격 문의
데이터시트 보기 →ADM211ARSZ
✅ 드롭인가격 문의
데이터시트 보기 →ADM211EARSZ 사양
| Product Type | RS-232 line-driver and receiver transceiver |
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Maximum Data Rate | 230 kbps |
| External Supply Capacitor | 0.1 µF |
| RS-232 Standards | EIA-232E and CCITT V.28 |
| Contact ESD Protection | ±8 kV |
| Air-Gap ESD Protection | ±15 kV |
| Human-Body-Model ESD Protection | ±15 kV |
| 패키지 | 28-pin SSOP |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| Packaging | Tube |
ADM211EARSZ 0.209 inch 핀 구성 가이드
ADM211EARSZ(0.209 inch 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADM211EARSZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADM211EARSZ 적합 용도: 6 애플리케이션s: Industrial RS-232 Instrumentation, Embedded Serial Port Expansion, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Secure Terminal and Access Equipment.
Industrial RS-232 Instrumentation
The ADM211EARSZ fits industrial instrumentation that exchanges several low-speed commands and measurements over RS-232. Its four drivers can carry outbound data, control, and handshake signals, while five receivers accept incoming status or monitor signals. The 4.5 V to 5.5 V operating range matches 5 V controller rails, and the ±15 kV air-gap and human-body-model ESD ratings add protection where cables connect to field-accessible equipment. Analog Devices specifies EIA-232E and CCITT V.28 operation up to 230 kbps, making the device suitable for legacy test instruments and industrial controllers that rely on stable single-ended serial signaling.
추천
Embedded Serial Port Expansion
ADM211EARSZ can expand a microcontroller or embedded controller that has too few serial interfaces for legacy equipment. A 5 V logic domain can drive four RS-232 outputs, while five receiver inputs accommodate data, status, and hardware-handshake lines from a peripheral or adapter. Operation up to 230 kbps covers many RS-232 peripherals without requiring a modern differential interface. The 28-pin SSOP is suitable for compact industrial controller boards, while enhanced ESD ratings help protect cable-connected ports. The PCB designer should preserve the manufacturer’s capacitor placement and verify connector-side protection and ground strategy.
추천
Test and Measurement Equipment
The ADM211EARSZ is appropriate for test instruments that communicate with older bench equipment, laboratory computers, or service interfaces through RS-232. Four driver outputs support command transmission and remote-control signals, and five receivers provide flexibility for data, status, and busy indicators. Its 230 kbps maximum rate is consistent with conventional RS-232 instrumentation links. The 5 V supply requirement allows straightforward integration with CMOS control logic, and the enhanced ESD protection is valuable when users repeatedly attach and detach test leads. Keep the analog and digital return paths well controlled and place bypass capacitance close to the device.
추천
Point-of-Sale Terminal Interface
A point-of-sale or retail peripheral can use ADM211EARSZ when it must support an RS-232 customer display, printer, scanner, or service terminal. Multiple drivers and receivers let one transceiver handle both command output and input-handshake signals without duplicating driver packages. The 4.5 V to 5.5 V supply range is compatible with 5 V embedded systems, and the device’s single-supply operation simplifies power design. EIA-232E and V.28 support cover the legacy signaling expected by many peripherals. Enhanced ESD protection adds robustness for exposed cables, although designers should still use shielded cable where required and keep the interface ground reference consistent with the connected equipment.
추천
Data Acquisition Equipment
ADM211EARSZ can provide the host-to-instrument interface in a data-acquisition system that collects measurements from legacy sensors or laboratory modules. The four transmitters can send configuration commands and synchronization signals, while five receivers can collect output data, alarms, and ready-status indicators. A maximum rate of 230 kbps supports many low-to-moderate-rate acquisition paths while avoiding the higher complexity of differential buses. The 28-pin SSOP conserves board area, and the enhanced ESD rating improves resilience to user-accessible cables. Validate cable length against the selected baud rate and follow the manufacturer’s charge-pump capacitor layout for repeatable operation.
추천
Secure Terminal and Access Equipment
The ADM211EARSZ fits access-control or secure-terminal equipment that connects to a controller through an RS-232 service port. Its multiple channels allow command, response, and status traffic to share a compact interface implementation, while the 5 V supply operation supports typical embedded controller rails. The device’s enhanced ±15 kV air-gap and human-body-model ESD protection is particularly relevant to service connectors that may be touched during installation. RS-232 remains a point-to-point interface, so the transmitter and receiver directions must be assigned carefully. Use a common signal ground where permitted by the connected equipment and validate the complete interface against the system security and EMC requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADM211EARSZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADM211EARS | ADM211ARS |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 4 | 4 | 4 |
| Number of Receivers | 5 | 5 | 5 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 230 kbps | 230 kbps | 230 kbps |
| Air-Gap ESD Protection | ±15 kV | ±8 kV | ±8 kV |
| Human-Body-Model ESD Protection | ±15 kV | ±8 kV | ±8 kV |
| RS-232 Compliance | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 | EIA-232E and CCITT V.28 |
주요 차별점
- Higher air-gap ESD withstand rating (vs ADM211EARS)
- Higher human-body-model ESD withstand rating (vs ADM211ARS)
- Maintains the same core RS-232 channel configuration (vs ADM211EARS)
설계 노트
Place the manufacturer-specified 0.1 µF charge-pump capacitor and the supply bypass capacitor directly beside their associated pins, with short ground returns. Avoid routing RS-232 outputs through long traces beneath sensitive analog circuitry. Keep connector protection and cable shield connections near the board edge, while separating the RS-232 return path from switching-node and high-current return paths.
Assign driver and receiver directions from the manufacturer pin table before laying out the connector. The four transmitters and five receivers support multiple unidirectional links, but unused inputs must be left in valid states and unused outputs must not be connected to active signals. Check that the PCB land pattern is the 28-pin SSOP pattern specified for ADM211EARSZ rather than a 24-pin or wide-body SOIC pattern.
Do not treat the ADM211EARSZ as a TTL-level driver or connect its RS-232 outputs directly to a microcontroller UART without the transceiver. Conversely, do not apply RS-232 bipolar levels to receiver inputs designed for CMOS logic. Confirm whether a connected port uses a DB9-style pin arrangement, an industry-standard RJ45 adapter, or a custom harness because the connector numbering is not necessarily the IC pin numbering.
RS-232 receivers can respond to external cables carrying fast common-mode transients even when the data rate is low. Maintain a low-impedance signal-ground connection according to the interface standard, use appropriately rated cable protection where necessary, and avoid large unprotected stubs on receiver inputs. The enhanced ADM211E ESD ratings improve robustness but do not replace connector-level protection or a sound chassis-ground strategy.
규정 준수 정보
The exact ADM211EARSZ ordering code has no definitive RoHS, REACH, halogen-free, or conflict-minerals statement in the available manufacturer text. Its enhanced ESD ratings and RS-232 standards compliance do not imply automotive qualification or environmental-material compliance.