ADM211EARZ - 4/5 RS-232 Transceiver | Analog Devices
MPN: ADM211EARZ ✓ AktifADM211EARZ Ringkasan
An RS-232 transceiver is an interface IC that converts between complementary logic-level signals and the voltage levels used on RS-232 links. It belongs to the transceiver category within interface ICs and ultimately serves as a physical-layer link between digital equipment and a serial port. The ADM211EARZ is useful when a system needs several RS-232 channels without using a separate driver or receiver IC for every port.
Key features include four transmit channels, five receive channels, operation from a single 5 V supply, and data-rate capability up to 200 kbps. The manufacturer describes the part as a robust interface for applications where 12 V is unavailable. Its 28-pin SOIC package provides a conventional surface-mount form factor, while separate driver outputs and receiver inputs allow several communication paths to be implemented in one device.
The ADM211EARZ uses an on-chip charge pump to generate the positive and negative voltages required by RS-232 line drivers. The 0.1 µF external capacitor specification reflects the charge-pump implementation rather than a requirement for 0.1 µF bypass capacitors on every supply rail. Designers should follow the manufacturer’s recommended connection and decoupling arrangement to preserve signal integrity and achieve the specified data rate.
Typical uses include industrial serial controllers, test equipment, data-acquisition systems, point-of-sale equipment, embedded serial-port controllers, and instrumentation that must communicate with legacy RS-232 peripherals. The five receivers are particularly useful in systems where several incoming links must be sensed while only four outbound links are required. A transceiver remains necessary when the system lacks RS-232 electrical-level drivers or receivers on its controller.
A key design consideration is that the ADM211EARZ is a multi-channel RS-232 interface, not a modern USB-to-serial converter. Existing point-to-point RS-232 cabling, signal polarity, grounding, and software drivers must be considered before replacing a legacy port. The system should also account for ground differences between connected equipment and use suitable protection when exposed to industrial transients.
This product page consolidates the manufacturer’s RS-232 interface information, verified distributor listings, drop-in cross-reference findings, and practical implementation guidance. It helps engineers distinguish true pin-compatible replacements from packaging-only variants while focusing on channel count, supply voltage, data rate, and the shared 28-pin SOIC footprint.
Pilihan pengganti yang segera untuk ADM211EARZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ADM211EARZ (sama faktor bentuk dan kaki) — berbeza dalam Interface Standard, Package.
SP211EEA-L/TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ADM211EARZ Spesifikasi
| Product Type | RS-232 transceiver |
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Tegangan Pemberi Arus | 5 V |
| Maximum Data Rate | 200 kbps |
| Charge-Pump Capacitor | 0.1 µF |
| Interface Standard | RS-232, EIA-232-E and CCITT V.28 |
| Kemasan | 28-pin SOIC |
| Jenis Pemasangan | Surface mount |
| RoHS Compliance | ROHS3 compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited) |
| ESD Protection | ±15 kV |
| Shutdown Control | Yes |
| Enable Control | Yes |
Panduan Konfigurasi Pin ADM211EARZ 28-pin soic
Konfigurasi pin untuk ADM211EARZ (28-pin soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk ADM211EARZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ADM211EARZ patut untuk 6 aplikasis: Industrial Serial Controllers, Data Acquisition Systems, Point-of-Sale Equipment, Test and Measurement Instruments, Embedded Serial-Port Controllers, Security and Surveillance Systems.
Industrial Serial Controllers
The ADM211EARZ fits industrial controllers that must operate legacy RS-232 equipment from a single 5 V logic rail. Four drivers support four outbound command or control channels, while five receivers allow five inbound serial signals to be monitored without using separate receiver packages. At rates up to 200 kbps, it covers conventional serial-control traffic while helping consolidate interface logic around one 28-pin SOIC device. The board should provide the manufacturer-specified 0.1 µF charge-pump capacitors and route each RS-232 line with appropriate protection.
Disebarkan
Data Acquisition Systems
The ADM211EARZ is useful in data-acquisition and laboratory equipment that combines several serial-controlled instruments with one host controller. The four drivers can address separate instruments, while the extra fifth receiver can monitor another incoming channel such as a status line, trigger report, or acknowledgment path. Operation from one 5 V supply simplifies mixed analog and digital equipment, and the 200 kbps capability is appropriate for many command-oriented RS-232 protocols. Maintain consistent ground references between connected devices and protect externally routed leads according to the installation environment.
Disebarkan
Point-of-Sale Equipment
Retail peripherals can use the ADM211EARZ when a system requires several legacy RS-232 ports for printers, scanners, scales, or customer displays. Four driver channels reduce the physical interface count for outbound traffic, and five receiver channels provide additional status-monitoring capability. The single 5 V operation aligns with embedded controller hardware, while the 200 kbps rate is well suited to short command and transaction exchanges. Because RS-232 uses bipolar voltage signaling, the implementation must retain proper logic inversion, cable routing, and grounding rather than treating the transceiver pins as ordinary UART signals.
Disebarkan
Test and Measurement Instruments
The ADM211EARZ is appropriate for test and measurement instruments that need multiple RS-232 connections for fixture control, remote commands, and status reporting. The 4/5 channel arrangement allows a single package to handle four outbound channels and five inbound signals, helping conserve board area compared with separate single-channel devices. Its documented 200 kbps performance supports common serial-control protocols, while shutdown can assist with controlled operating states. Designers should compare the receiver thresholds and drive levels with the connected equipment and include appropriate protection for bench connections.
Disebarkan
Embedded Serial-Port Controllers
The ADM211EARZ can serve as the physical-layer companion to an embedded processor or microcontroller that exposes one or more legacy UART ports. The processor supplies TTL/CMOS logic levels, while the transceiver performs the required level conversion and signal conditioning for RS-232 links. Its four drivers and five receivers consolidate multiple peripheral connections without moving the physical-layer function into a larger communications module. Layout must keep charge-pump traces and external capacitors close, and firmware must handle the RS-232 polarity and timing conventions expected by each peripheral.
Disebarkan
Security and Surveillance Systems
The ADM211EARZ can support control and status links between surveillance equipment and legacy accessories that use RS-232. Four outbound channels may address cameras, positioning equipment, or local displays, while five inbound channels can receive acknowledgments and sensor reports. The 200 kbps rate accommodates many short control packets, and the 28-pin SOIC package simplifies integration into control boards. As with any external cable interface, the design should use appropriate surge protection, maintain safe ground relationships, and avoid exposing the transceiver to direct lightning or industrial transients.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ADM211EARZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | SP211EEA-L/TR |
|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC |
| Brand | Analog Devices | Exar |
| Transceiver Configuration | 4 drivers, 5 receivers | 4 drivers, 5 receivers |
| Supply Voltage | 5 V | 5 V |
Penyeberangsung Jelas
- Five receiver channels in a single RS-232 transceiver (vsSP211EEA-L/TR)
- Documented 200 kbps operating capability (vsSP211EEA-L/TR)
- Single-supply implementation with defined charge-pump capacitance (vsSP211EEA-L/TR)
Catatan Desain
Place the manufacturer-specified 0.1 µF charge-pump capacitors close to their dedicated pins and use the shortest practical routing between the capacitor, charge-pump pins, and transceiver circuitry. Keep the RS-232 driver and receiver traces away from clocks, switching supplies, and high-speed digital nets. Confirm every net against the 28-pin pin-description table rather than relying on another ADM211 family variant.
Do not substitute the ADM211EARZ on a PCB solely because another package has the same nominal number of pins. The drop-in candidate must match the complete 28-pin SOIC footprint and every driver, receiver, supply, ground, shutdown, and enable connection. In particular, verify unused receiver inputs and driver outputs against the data-sheet recommendations before treating the substituted circuit as production-ready.
Decouple the 5 V supply locally and provide a low-impedance ground return for the transceiver and connected equipment. External protection networks should be selected from the device’s documented driver and receiver ratings rather than added by guesswork. When multiple RS-232 ports are active, include the combined supply-current demand in the power budget and provide adequate thermal area beneath the 28-pin SOIC package.
Treat each RS-232 cable as a potentially noisy external interface. Use a consistent equipment-ground strategy, keep protective-return paths short, and add appropriately rated surge protection where cables leave an enclosure. The transceiver’s ±15 kV ESD rating does not eliminate the need for overvoltage or surge protection in industrial installations; the complete protection strategy must remain compatible with the transceiver’s electrical limits.
Maklumat Kesediaan
The retrieved technical listing identifies the ADM211EARZ as ROHS3 compliant and REACH unaffected, with MSL 1 unlimited classification. AEC-Q100 qualification is not identified for this interface IC.