Analog Devices

ADM241LAR - 120 kbps 4/5 RS-232 Transceiver | Analog Devices

MPN: ADM241LAR ✓ Aktif
5 V Vdss ≤1 µA Id 28-pin SOIC Package
MOQ: 1 |

ADM241LAR Ringkasan

The Analog Devices ADM241LAR is a 5 V powered CMOS RS-232 interface transceiver with four drivers, five receivers, and a maximum data rate of 120 kbps. It uses a single 5 V supply, provides approximately ±9 V driver output swing through on-board DC-DC converters, and is packaged in a 28-pin SOIC for surface-mount industrial equipment.

An RS-232 transceiver is an interface IC that combines line drivers and line receivers for serial data links using the EIA-232-E and V.28 specifications. The driver channels convert low-voltage logic signals into bipolar RS-232 levels, while the receiver channels convert bipolar line signals back into logic levels. This integrated transceiver category reduces the number of external components required where both transmission and reception are needed in the same equipment.

Key features include a single 5 V power supply, four drivers, five receivers, 120 kbps operation, and on-board DC-DC converters that generate approximately ±9 V output swing. The interface uses small 1 µF charge-pump capacitors and includes a low-power shutdown mode in which supply current is no more than 1 µA. Receiver inputs withstand voltages up to ±30 V, improving tolerance to exposed serial-port wiring and transients.

The integrated charge-pump architecture eliminates the need for an external ±12 V supply, making the ADM241LAR appropriate for equipment that otherwise operates entirely from 5 V. Its five receivers provide one more receive channel than its four driver channels, which supports designs with an additional receive-only signal, an echo-detection path, or a status input. The 28-pin SOIC package also offers a larger lead pitch than fine-pitch packages, easing assembly and inspection.

Typical applications include industrial serial-port adapters, data-acquisition equipment, test and measurement instruments, point-of-sale terminals, barcode scanners, and embedded control systems that exchange RS-232 data with external peripherals. The interface is especially useful when the host lacks a native RS-232 transceiver and the connected equipment requires bipolar signaling rather than a 3.3 V or 5 V logic-level serial port.

Design the charge-pump capacitor network and input/output protection for the voltage and current limits stated in the Analog Devices datasheet. Keep the connector-side interface path physically separated from sensitive logic and power traces, provide the required bypass capacitance near the supply pins, and verify signal integrity at the intended baud rate before treating the 120 kbps figure as a guaranteed system-level result.

This product page organizes the ADM241LAR’s interface characteristics, package information, sourcing path, design guidance, and replacement considerations into a compact engineering reference. It also distinguishes verified device identity from compatibility checks that must still be completed before approving any substitute in an existing PCB design.

Pilihan pengganti yang segera untuk ADM241LAR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

HIN213CAZ-T

✅ Masuk Drop-In
📦 28-SOIC
Equivalent RS-232 transceiver with the same 28-SOIC package; verify channel count, capacitor values, and shutdown polarity against the ADM241LAR datasheet

📋 Alternatif rujukan (tidak dalam katalog)

ADM241LAR Spesifikasi

Product Type RS-232 transceiver
Tegangan Pemberi Arus 5 V
Driver Channels 4
Receiver Channels 5
Maximum Data Rate 120 kbps
Driver Output Swing Approximately ±9 V
Charge-Pump Capacitor Value 1 µF
Shutdown Supply Current ≤1 µA
Receiver Input Voltage Tolerance ±30 V
Interface Standard EIA-232-E and V.28
Integrated DC-DC Converter Yes
Logic Technology CMOS
Kemasan 28-pin SOIC
Jenis Pemasangan Surface Mount

Panduan Konfigurasi Pin ADM241LAR 28-pin soic

Konfigurasi pin untuk ADM241LAR (28-pin soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 28-pin soic untuk ADM241LAR

Tiada data garisan pin yang diperoleh untuk ADM241LAR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADM241LAR patut untuk 6 aplikasis: Industrial Serial-Port Adapter, Data-Acquisition Equipment, Test and Measurement Instrument, Point-of-Sale Terminal, Barcode Scanner Interface, Embedded Control Communication.

🏭

Industrial Serial-Port Adapter

The ADM241LAR fits a 5 V industrial adapter that must communicate with legacy RS-232 equipment while the host processor exposes only logic-level serial signals. Its four drivers and five receivers support multiple data and handshake paths, while the integrated DC-DC converters remove the need for a separate ±12 V rail. The 120 kbps capability accommodates common serial-device rates, although the complete link should be tested with the intended cable length and grounding arrangement.

📊

Data-Acquisition Equipment

The ADM241LAR can provide the physical RS-232 layer for a data-acquisition unit that must exchange commands and measurements with a laboratory computer or controller. The five receiver channels leave room for additional status or handshake inputs, and the four driver channels can handle outbound data and control signals. Its single 5 V architecture simplifies power distribution around instrumentation that often lacks bipolar analog supplies.

🔧

Test and Measurement Instrument

A bench instrument using the ADM241LAR can add an RS-232 command and control interface without building a separate driver-receiver subsystem. The 28-pin SOIC package supports conventional surface-mount assembly, and approximately ±9 V generated output swing meets the needs of a standard RS-232 link. Designers should use the manufacturer’s recommended charge-pump layout and verify timing margins because instrument-control traffic can include both continuous data and hardware handshakes.

🖥️

Point-of-Sale Terminal

The ADM241LAR is appropriate for point-of-sale equipment that must connect a peripheral through RS-232 while the main electronics use a single 5 V supply. Four drivers and five receivers can support data transmission, receipt information, and hardware-control inputs in one integrated interface. The low-power shutdown mode can reduce consumption when the port is idle, but the system must preserve any required receive-active behavior and observe the exact shutdown truth table.

📷

Barcode Scanner Interface

A barcode-scanner interface can use the ADM241LAR to connect equipment operating from 5 V to a scanner or peripheral that expects bipolar RS-232 signaling. The integrated converters generate approximately ±9 V without requiring a separate negative supply rail, and the receiver input tolerance of ±30 V provides margin for commonly exposed connector wiring. In installations with long cables or noisy machinery, add suitable connector protection and validate the signal at the intended baud rate.

🔌

Embedded Control Communication

The ADM241LAR supports legacy RS-232 service ports on embedded controllers that use a 5 V core supply. Its five receivers can connect several incoming control or status signals, and the low-power shutdown current of no more than 1 µA helps conserve power during inactive periods. The final design must account for ground potential differences, connector protection, and the transition between logic-level controller pins and bipolar line-side signals.

What is the ADM241LAR and what does it do?
The ADM241LAR is a 5 V powered CMOS RS-232 transceiver containing four drivers, five receivers, and on-board DC-DC converters for bipolar line signaling. According to the Analog Devices datasheet, it meets EIA-232-E and V.28 specifications and supports data rates up to 120 kbps. The integrated converters produce approximately ±9 V output swing, allowing the interface to operate without a separate external ±12 V supply.
What is the operating voltage of ADM241LAR?
The ADM241LAR operates from a single 5 V supply. According to the Analog Devices datasheet, the device includes on-board DC-DC converters that generate approximately ±9 V for the RS-232 driver outputs. This architecture simplifies equipment that cannot accommodate separate positive and negative analog supplies, while the input logic side remains connected to the same 5 V system.
What is the maximum data rate of ADM241LAR?
The maximum specified data rate of the ADM241LAR is 120 kbps. This rating comes from the Analog Devices datasheet and applies to the transceiver’s RS-232 driver and receiver interface. Practical line rate can be lower when cable length, capacitance, grounding, connector quality, and system timing are unfavorable, so the complete communication path should be validated with the intended cable and peripheral.
Where can I download the ADM241LAR datasheet PDF?
The ADM241LAR datasheet PDF is available from the official Analog Devices documentation path at https://pdf.digi-electronics.com/pdf/1471/ADM241LAR-datasheet.pdf. It describes the 5 V-powered CMOS architecture, EIA-232-E and V.28 compliance, four drivers, five receivers, ±9 V generated output swing, shutdown behavior, and the application circuit. Use its pin-description and electrical-characteristics tables when assigning PCB nets.
Where can I find the ADM241LAR pinout?
Use the pin-description table and package drawing in the Analog Devices ADM241LAR datasheet to locate every pin in the 28-pin SOIC. The verified device identity confirms the package and 4/5 transceiver configuration, but the individual pin names are not reproduced on this page. Assign each driver, receiver, supply, ground, shutdown, and charge-pump connection directly from the manufacturer’s pin table.
Does the ADM241LAR require external ±12 V power?
No. The ADM241LAR is designed around a single 5 V supply and uses on-board DC-DC converters to produce approximately ±9 V driver output swing. According to the Analog Devices datasheet, this allows the RS-232 interface to operate in systems where ±12 V is unavailable. The charge-pump network still requires the specified small 1 µF capacitors and correct PCB placement.
What is the shutdown current of ADM241LAR?
The ADM241LAR draws no more than 1 µA from the supply in low-power shutdown mode. According to the Analog Devices datasheet, the device also provides a shutdown mode that reduces power dissipation while keeping receivers active, which supports equipment that must detect an incoming signal without continuously powering the transmit circuitry. Confirm the exact enable and shutdown logic levels in the manufacturer’s truth table.
How many driver and receiver channels does ADM241LAR have?
The ADM241LAR contains four driver channels and five receiver channels. According to the Analog Devices datasheet, this 4/5 arrangement is intended for RS-232 interfaces where transmission and reception are both required. The fifth receiver can support an additional receive-only connection, hardware handshake signal, or system status input, depending on the selected RS-232 signal assignment.
Can HIN213CAZ-T replace the ADM241LAR?
The HIN213CAZ-T is identified as an equivalent candidate for the ADM241LAR, but its package and electrical details still require confirmation before it becomes a drop-in choice. Verify pin numbering, supply voltage, driver and receiver counts, shutdown behavior, and absolute maximum ratings against the Analog Devices datasheet. A published equivalence reference is a starting point, not proof that an existing PCB layout can be reused.
Is ADM241LAR the same as ADM241LARZ?
The ADM241LARZ is an orderable designation associated with the ADM241LAR device, but the ordering suffix must be checked before treating the two as separate electrical alternatives. The verified search results identify ADM241LAR as a 28-pin SOIC, 4/5 RS-232 transceiver and separately compare ADM241LAR with ADM241LARZ. Use the manufacturer ordering guide to confirm whether the difference is packaging or shipment configuration rather than electrical performance.
What is the difference between ADM241LAR and ADM242AR?
The ADM241LAR and ADM242AR are related Analog Devices RS-232 interface products, but the verified search results do not expose enough pin-level and electrical data to quantify every difference. Check both package drawings, driver and receiver counts, shutdown specifications, and maximum data rates in their manufacturer documentation. Do not select ADM242AR as a direct replacement until its pin compatibility with the existing ADM241LAR footprint is confirmed.
What can replace the ADM241LAR on an existing PCB?
The safest replacement is the same Analog Devices device ordered with an approved packaging suffix; another candidate is the Renesas HIN213CAZ-T, which has been identified as an equivalent candidate. A drop-in substitution must match the 28-pin SOIC footprint, pin functions, 5 V supply, channel counts, shutdown behavior, and RS-232 timing. Request the complete manufacturer datasheet and perform a board-level review before approving a substitute.
When should I choose ADM241LAR instead of a discrete RS-232 interface?
Choose the ADM241LAR when the design needs both transmit and receive channels but can supply only 5 V and wants to reduce component count. Its four drivers, five receivers, integrated converters, and low-power shutdown provide a compact interface in a 28-pin SOIC. A discrete implementation may offer different board area, cost, or power characteristics, but it also requires separate charge-pump and protection design work.
Is ADM241LAR suitable for industrial RS-232 equipment?
The ADM241LAR is suitable for many 5 V industrial and commercial RS-232 interfaces because it supports 120 kbps, meets EIA-232-E and V.28 specifications, and tolerates receiver inputs up to ±30 V. Its 28-pin SOIC package also simplifies surface-mount assembly. Final suitability depends on the specified operating-temperature range, isolation requirements, surge protection, regulatory needs, and the grounding environment of the installation.
What are the key specifications of ADM241LAR that engineers should know?
The ADM241LAR combines four RS-232 drivers and five receivers in a 28-pin SOIC, operates from 5 V, and supports data rates up to 120 kbps. According to the Analog Devices datasheet, on-board converters deliver approximately ±9 V swing, receiver inputs tolerate ±30 V, the charge-pump capacitors are 1 µF, and shutdown current is no more than 1 µA. These parameters define its core application and layout requirements.
Where can I buy ADM241LAR and what is its lead time?
Use the Request a Quote form on this page to request current ADM241LAR availability, lead time, and order handling. The listing confirms that the part is offered as a 28-pin SOIC RS-232 transceiver, but it does not publish a fixed quantity-price schedule or a guaranteed lead time. Current commercial terms should be confirmed directly through the quote request.
Is ADM241LAR currently in stock?
Stock status should be checked through the Request a Quote form on this page because inventory can change independently of the technical characteristics of the ADM241LAR. One listing states that orders can ship immediately, but that statement is not a guaranteed stock commitment for every quantity. Submit the required part number, quantity, target date, and shipment destination to obtain a current availability response.
What is the price of ADM241LAR?
Use the Request a Quote form on this page for the current ADM241LAR price and quantity breaks. The verified listings identify the manufacturer and device type but do not print an exact quantity-break table for this MPN. A quote request allows the order quantity, reel or cut-tape preference, and delivery requirements to be considered before commercial terms are confirmed.

Data referensi kejuruteraan untuk ADM241LAR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADM241LAR for a 5 V system that needs four RS-232 transmit channels, five receive channels, and an integrated power-conversion solution. Its approximately ±9 V output swing removes separate ±12 V rails, the 120 kbps rating covers common serial-port traffic, and shutdown current of no more than 1 µA supports low-power operation. The 28-pin SOIC is also practical for conventional surface-mount assembly. Consider a discrete interface only when a specific cost, isolation, area, or power requirement outweighs the integration benefits. When evaluating the HIN213CAZ-T, ADM242AR, or another orderable variant, check the footprint, pin functions, supply requirements, channel counts, timing, and shutdown behavior before approving it as a replacement. Do not rely on an equivalence listing alone; confirm that every connected net retains the intended electrical function.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 28-pin SOIC
Brand Analog Devices
Supply Voltage 5 V
Driver Channels 4
Receiver Channels 5
Maximum Data Rate 120 kbps
Driver Output Swing Approximately ±9 V
Charge-Pump Capacitor Value 1 µF
Shutdown Supply Current ≤1 µA
Receiver Input Voltage Tolerance ±30 V
Interface Standards EIA-232-E and V.28
Mounting Type Surface Mount

Penyeberangsung Jelas

  • Four transmitters and five receivers in one interface (vsA typical four-driver/four-receiver RS-232 transceiver)
  • Single-supply operation with integrated bipolar generation (vsA discrete RS-232 driver and receiver design)
  • Low-power shutdown suitable for managed interfaces (vsA continuously powered discrete RS-232 interface)

Catatan Desain

Place the specified 1 µF charge-pump capacitors close to their associated ADM241LAR pins, following the Analog Devices datasheet layout example. Keep these high-current charge-pump paths compact and away from sensitive receiver inputs. Accurate placement reduces switching disturbances on the board, while the 28-pin SOIC footprint simplifies routing compared with a fine-pitch package.

Connect the ADM241LAR to a properly decoupled 5 V rail and follow the manufacturer’s recommended bypass arrangement. Because the receiver channels can accept signals up to ±30 V, the power and ground structure must remain stable when connector-side transients occur. Add connector protection separately if the installation exposes the RS-232 port to severe industrial surges.

Separate logic-side nets from connector-side driver and receiver nets to prevent charge-pump and external line activity from coupling into sensitive logic. Maintain a direct return path between interface ground and the connected equipment, and route the RS-232 cable away from switching nodes and high-current traces. Validate the completed interface at the highest intended data rate.

Do not treat the approximately ±9 V generated swing as permission to exceed the receiver’s ±30 V input rating. Confirm the shutdown truth table before using the low-power mode, especially when a system expects a receiver to remain active during transmitter shutdown. Also verify package pin functions rather than assuming that every equivalent-ordering code preserves the same pinout.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

EIA-232-E and V.28 interface compliance is stated in the Analog Devices datasheet. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADM241LAR datasheet ADM241LAR pinout ADM241LAR datasheet pdf ADM241LAR equivalent ADM241LAR replacement ADM241LAR vs ADM242AR ADM241LAR HIN213CAZ-T equivalent ADM241LAR 28-SOIC pinout ADM241LAR 120 kbps ADM241LAR 5V RS-232 Analog Devices ADM241LAR ADM241LAR application circuit ADM241LAR price ADM241LAR stock

Komponen dan Tanda berkaitan

Analog Devices ADM241LAR RS-232 transceiver interface IC semiconductor CMOS EIA-232-E V.28 RS-232 driver RS-232 receiver DC-DC converter charge-pump capacitor 5 V power supply 120 kbps ±9 V output swing ±30 V receiver input low-power shutdown 28-pin SOIC SOIC package family surface-mount technology industrial serial interface test and measurement equipment point-of-sale terminal barcode scanner interface
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ