ADM3055EBRWZ - 5kV Isolated CAN FD Transceiver | Analog Devices
MPN: ADM3055EBRWZ ✓ AktifADM3055EBRWZ Ringkasan
A CAN transceiver is the physical layer interface between a CAN controller and the differential bus lines (CANH and CANL). It converts the controller's logic-level signals to differential signals for transmission and receives differential signals back to logic levels. In industrial and automotive environments, galvanic isolation is often required to protect controllers from ground loops, voltage transients, and noise. The ADM3055E integrates this isolation, eliminating the need for external isolation components and simplifying PCB design.
Key features include 5 kV rms isolation, compliance with ISO 11898-2:2016 for CAN FD, data rates up to 12 Mbps, a VIO pin for 1.7 V to 5.5 V logic levels, extended common-mode range of ±25 V, and bus fault protection of ±40 V on CANH and CANL pins. The device also supports low-power standby with remote wake request, making it suitable for power-sensitive nodes.
The ADM3055E uses Analog Devices' iCoupler and isoPower technologies, which use chip-scale transformers to transmit data and power across the isolation barrier. This approach provides reliable isolation with low propagation delay (150 ns maximum loop) and high common-mode transient immunity. The integrated DC-to-DC converter eliminates the need for a separate isolated power supply, reducing component count and board space.
Typical applications include industrial fieldbus networks, building automation, automotive diagnostics, and any system requiring robust, isolated CAN communication. The wide logic-level range and high data rate make it versatile for both legacy CAN and newer CAN FD designs.
When designing with this device, ensure proper PCB layout for the isolation barrier and provide adequate decoupling on both the logic and bus sides. The integrated converter requires careful thermal management at high data rates and loads.
Pilihan pengganti yang segera untuk ADM3055EBRWZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ADM3055EBRWZ (sama faktor bentuk dan kaki) — berbeza dalam Data Rate, Package, Bus Fault Protection, Isolation Technology, Isolation Voltage.
ADM3057EBRWZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
ADM3055EBRWZ Spesifikasi
| Isolation Rating | 5 kV rms |
| Protocol | CAN FD (ISO 11898-2:2016) |
| Kadar Data | Up to 12 Mbps |
| Number of Transceivers | 1/1 |
| Tegangan Pemberi Arus | 5 V |
| Logic Level (VIO) | 1.7 V to 5.5 V |
| Common-Mode Range | ±25 V |
| Bus Fault Protection | ±40 V on CANH/CANL |
| Maximum Loop Propagation Delay | 150 ns |
| Standby Mode | Yes, with remote wake request |
| Kemasan | 20-lead SOIC-W (RW) |
| Suhu Operasi | -40°C to +125°C |
| Isolation Technology | iCoupler + isoPower |
| Status RoHS | Compliant |
| Jenis Pemasangan | Surface Mount |
Konfigurasi Pin ADM3055EBRWZ
| Pin 1 | VIO — Logic supply voltage (1.7V to 5.5V) |
| Pin 2 | TXD — Transmit data input |
| Pin 3 | RXD — Receive data output |
| Pin 4 | STBY — Standby mode control |
| Pin 5 | GND1 — Logic-side ground |
| Pin 6 | GND1 — Logic-side ground |
| Pin 7 | VCC — 5V supply input |
| Pin 8 | GND1 — Logic-side ground |
| Pin 9 | NC — No connect |
| Pin 10 | NC — No connect |
| Pin 11 | NC — No connect |
| Pin 12 | NC — No connect |
| Pin 13 | CANH — CAN high bus line |
| Pin 14 | CANL — CAN low bus line |
| Pin 15 | GND2 — Bus-side ground |
| Pin 16 | GND2 — Bus-side ground |
| Pin 17 | VISO — Isolated supply output |
| Pin 18 | VISO — Isolated supply output |
| Pin 19 | NC — No connect |
| Pin 20 | NC — No connect |
Aplikasi Biasa
ADM3055EBRWZ patut untuk 6 aplikasis: Industrial Fieldbus Networks, Building Automation, Automotive Diagnostics, Medical Equipment, Test and Measurement, Renewable Energy Systems.
Industrial Fieldbus Networks
The ADM3055EBRWZ provides 5 kV isolation and CAN FD support up to 12 Mbps, making it ideal for industrial fieldbus networks where robust communication and galvanic isolation are critical. Its integrated isoPower converter simplifies design by eliminating external isolated power supplies, reducing board space and component count. The ±25 V common-mode range and ±40 V bus fault protection ensure reliable operation in harsh industrial environments with ground potential differences and electrical noise.
Disebarkan
Building Automation
In building automation systems, the ADM3055EBRWZ enables reliable CAN communication between HVAC controllers, lighting systems, and security panels. Its low-power standby mode with remote wake request supports energy-efficient always-on nodes. The wide VIO range (1.7 V to 5.5 V) allows direct interface with low-voltage microcontrollers, simplifying logic-level translation. The integrated isolation protects sensitive control electronics from ground loops common in large buildings.
Disebarkan
Automotive Diagnostics
The ADM3055EBRWZ is suitable for automotive diagnostic systems requiring isolated CAN communication. Its 5 kV isolation protects test equipment from high-voltage transients on vehicle buses. The device supports CAN FD at up to 12 Mbps, enabling faster firmware updates and data logging. The extended temperature range (-40°C to +125°C) ensures operation in under-hood environments. The integrated DC-DC converter simplifies power supply design in space-constrained diagnostic tools.
Disebarkan
Medical Equipment
The ADM3055EBRWZ provides the high isolation (5 kV rms) required for medical equipment to meet safety standards. It enables isolated CAN communication between patient monitoring devices, infusion pumps, and central control units. The integrated isoPower converter reduces leakage current and simplifies compliance with medical isolation requirements. The low propagation delay (150 ns) ensures real-time data transmission critical for patient safety.
Disebarkan
Test and Measurement
In test and measurement equipment, the ADM3055EBRWZ enables isolated CAN communication between instruments and devices under test. Its high data rate (12 Mbps) supports fast data acquisition, while the ±25 V common-mode range allows operation in systems with significant ground potential differences. The integrated isolation protects sensitive measurement circuits from noise and transients, ensuring accurate readings.
Disebarkan
Renewable Energy Systems
The ADM3055EBRWZ is well-suited for renewable energy systems such as solar inverters and wind turbines, where isolated CAN communication is needed between control units and monitoring systems. Its 5 kV isolation protects against high-voltage transients, while the wide operating temperature range ensures reliability in outdoor environments. The integrated DC-DC converter simplifies power supply design in remote or space-constrained installations.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ADM3055EBRWZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ADM3055EBRIZ | ADM3057EBRWZ | ADM3057EBRIZ | ISO1042DWVR |
|---|---|---|---|---|---|
| Package | 20-lead SOIC-W (RW) | 20-lead SOIC (RI) | 20-lead SOIC-W (RW) | 20-lead SOIC (RI) | SOIC-8 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Isolation Rating | 5 kV rms | 5 kV rms | 3 kV rms | 3 kV rms | 5 kV rms |
| Data Rate | 12 Mbps | 12 Mbps | 12 Mbps | 12 Mbps | 5 Mbps |
| Integrated DC-DC Converter | Yes | Yes | Yes | Yes | No |
| VIO Range | 1.7V to 5.5V | 1.7V to 5.5V | 1.7V to 5.5V | 1.7V to 5.5V | 2.25V to 5.5V |
| Common-Mode Range | ±25V | ±25V | ±25V | ±25V | ±25V |
| Bus Fault Protection | ±40V | ±40V | ±40V | ±40V | ±58V |
Penyeberangsung Jelas
- Integrated isoPower DC-DC converter (vsISO1042DWVR)
- Higher data rate (12 Mbps vs 5 Mbps) (vsISO1042DWVR)
- 5 kV isolation in SOIC-W package (vsADM3057EBRWZ)
Catatan Desain
Maintain a clear isolation barrier on the PCB between the logic side (pins 1-12) and the bus side (pins 13-20). Use a minimum creepage distance of 8 mm for 5 kV rms isolation. Place decoupling capacitors (0.1 µF and 10 µF) close to VCC and VISO pins. Avoid routing traces across the isolation barrier.
The integrated isoPower DC-DC converter generates heat, especially at high data rates and loads. Ensure adequate copper area on the PCB for heat dissipation. The SOIC-W package has a thermal resistance of approximately 40°C/W. For continuous operation at 12 Mbps, consider adding thermal vias under the package.
Do not exceed the absolute maximum ratings for VCC (7V) or VIO (6V). Ensure the VIO pin is powered before or simultaneously with VCC to avoid latch-up. The STBY pin must be properly terminated; floating it can cause unintended standby mode. Use proper termination resistors (120 Ω) on the CAN bus to prevent signal reflections.
Maklumat Kesediaan
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified; for automotive use, verify with manufacturer.
