Texas Instruments

ADS7800JP - 12-Bit 3us SAR ADC | Texas Instruments

MPN: ADS7800JP ✓ Aktif
+5 V Vdss 24-pin plastic DIP Package Internal Speed
MOQ: 1 |

ADS7800JP Ringkasan

The Texas Instruments ADS7800JP is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a 3 microsecond conversion time, housed in a 24-pin plastic DIP package. It provides one analog input, an internal sample-and-hold circuit, internal reference and clock, microprocessor-compatible digital outputs, and three-state output drivers. The device operates from a +5 V supply with an external -12 V or -15 V supply for bipolar analog input range support.

An ADC is a data-acquisition IC that converts a continuously varying analog voltage into a digital code for processing, measurement, or control. The ADS7800 belongs to the SAR ADC hierarchy, where a successive-approximation conversion compares the sampled input with an internal reference through successive binary trials. Relative to flash and pipeline ADCs, the SAR architecture combines modest resolution and conversion speed with relatively simple control logic and low cost, making it suitable for industrial instrumentation and embedded measurement systems.

The principal features include 12-bit resolution, one analog input channel, and a stated 3 microsecond conversion rate. Internal sample-and-hold, reference, clock, and microprocessor interface blocks reduce the number of external support components. Three-state output drivers allow the digital bus to be placed in a high-impedance state, supporting shared-bus or microprocessor-controlled acquisition arrangements. The converter is available in performance grades covering 0°C to +70°C and -40°C to +85°C operating ranges.

The ADS7800 uses CMOS structures for its sampling and conversion circuitry. During acquisition, the sample-and-hold network presents a stable voltage to the internal SAR core; after the falling edge of the conversion signal, successive approximation decisions establish the digital result. Its parallel microprocessor interface provides direct binary-code access, while the three-state drivers permit controlled connection to compatible data buses. The -12 V or -15 V negative supply expands the usable bipolar input range beyond a conventional single-supply ADC.

Typical uses include industrial process-control loops, transducer instrumentation, data acquisition modules, digital voltmeters, laboratory measurement equipment, and embedded control systems. The 3 microsecond conversion time supports updating measurement loops without the pipeline latency associated with faster high-resolution converters. Designers should preserve the input range, supply sequencing, and logic-level requirements of the selected device grade.

A key implementation consideration is the ADS7800's unusual combination of +5 V, -12 V or -15 V, and analog-supply connections. Reference and analog-input bypass capacitors should be placed close to their associated pins, while the digital interface must not drive the three-state outputs during acquisition. The 24-pin DIP footprint also requires adequate spacing for through-hole assembly and appropriate clearances around sensitive analog pins.

This page combines the manufacturer product information with practical engineering guidance for signal conditioning, supply implementation, digital interfacing, and component selection. It also identifies same-family drop-in options and highlights the operating-temperature differences that matter when planning industrial or extended-temperature equipment.

Pilihan pengganti yang segera untuk ADS7800JP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADS7800JP (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Input Type, Resolution.

Texas Instruments
Architecture: SAR (Successive Approximation)
Input Type: Single-Ended
Resolution: 12 bits
Bandingkan Dengan ADS7800JP →

ADS7800Y

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-pin plastic DIP
Operating-temperature maximum is 70°C versus 85°C, a 15°C lower limit; resolution, conversion time, and pinout remain the same

📋 Alternatif rujukan (tidak dalam katalog)

ADS7800YP

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 24-pin plastic DIP
Same -40°C to +85°C temperature grade, 12-bit resolution, 3 us conversion time, and 24-pin plastic DIP pinout as ADS7800JP

📋 Alternatif rujukan (tidak dalam katalog)

ADS7800JP Penilaian maksimum & Ciri-ciri Elektrik

Pemecahkatan 12 bit
Conversion Time 3 us
Architecture Successive approximation (SAR)
Analog Input Channels 1 channel
Input Type Single-ended analog input
Positive Supply Voltage +5 V
Negative Supply Voltage -12 V or -15 V
Kemasan 24-pin plastic DIP
Sample-and-Hold Circuit Internal
Reference Internal
Clock Internal
Digital Interface Microprocessor-compatible parallel interface
Output Driver Three-state output drivers
Operating Temperature Grade 1 0°C to +70°C
Operating Temperature Grade 2 -40°C to +85°C

Panduan Konfigurasi Pin ADS7800JP 24-pin plastic dip

Konfigurasi pin untuk ADS7800JP (24-pin plastic dip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 24-pin plastic dip untuk ADS7800JP

Tiada data garisan pin yang diperoleh untuk ADS7800JP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADS7800JP patut untuk 6 aplikasis: Industrial Process Measurement, Digital Voltmeter and Panel Meter, Transducer Data Acquisition, Embedded Control System, Laboratory Signal Acquisition, Power and Equipment Monitoring.

🏭

Industrial Process Measurement

The ADS7800JP fits single-channel industrial process measurement because it combines 12-bit resolution with a 3 microsecond conversion time in a 24-pin plastic DIP package. Place it behind a protected analog front end that scales a pressure, temperature, or level transducer into the converter's input range. The fast conversion allows the controller to refresh its process variable without requiring a high-order pipeline ADC. Its -40°C to +85°C operating grade supports equipment installed in industrial environments, although the +5 V and -12 V or -15 V supply architecture requires careful rail planning.

📊

Digital Voltmeter and Panel Meter

The ADS7800JP can digitize a scaled dc voltage for a digital voltmeter or panel meter. Its 12-bit conversion result provides 4096 code levels, while the 3 microsecond conversion time supports responsive meter updates. The analog front end should perform attenuation, filtering, and input protection before driving the single ADC input. Because the ADS7800JP includes an internal sample-and-hold circuit, reference, and clock, the system can remain compact, while the parallel interface and three-state outputs support direct connection to a microprocessor or display controller.

🔧

Transducer Data Acquisition

For pressure, load-cell, or resistance-based transducer acquisition, the ADS7800JP provides a single 12-bit measurement channel with a 3 microsecond conversion time. Use an instrumentation front end to convert the transducer signal into an analog voltage within the converter's supported input range, then add filtering close to the ADC input. The integrated sample-and-hold and reference blocks reduce external circuitry, while the -40°C to +85°C grade supports wide-ranging industrial equipment. Calibration systematics should be evaluated in software because converter resolution does not remove errors contributed by the front end, reference network, or sensor.

🧩

Embedded Control System

The ADS7800JP is appropriate for embedded controllers that need periodic analog measurements without multiplexing multiple channels through one converter. Its 3 microsecond conversion time allows rapid sampling relative to many control loops, and the microprocessor-compatible parallel interface provides direct access to the 12-bit code. The host controller must manage the conversion-control handshake and release the three-state outputs at the correct time. Designers should allocate layout space for the through-hole DIP package and isolate the analog input and reference paths from digital return currents and switching regulators.

📡

Laboratory Signal Acquisition

The ADS7800JP can serve as the conversion element in a laboratory data-acquisition module when the input bandwidth and resolution match the measurement. Its 12-bit resolution and 3 microsecond conversion time are useful for slowly varying or periodically sampled waveforms, but the analog input bandwidth and acquisition timing must be checked against the signal of interest. Use shielded interconnections, stable reference bypassing, and careful grounding to reduce noise pickup. The 24-pin DIP construction also simplifies breadboard and prototype assembly, making it useful for repeatable instrument development before converting to a smaller production package.

⚡

Power and Equipment Monitoring

The ADS7800JP is suitable for monitoring a slowly changing power-system or equipment parameter when the measured quantity is conditioned into the ADC input range. A 3 microsecond conversion time is substantially quicker than most mechanical monitoring cycles, allowing multiple readings to be averaged or transferred to a controller. The single-channel architecture simplifies signal routing but requires channel selection or multiple converter instances when several variables must be sampled simultaneously. Ensure the input protection network can withstand transients, and account for the device's -12 V or -15 V supply requirement when sizing the system power rails.

Ringkasan Produk Disebarkan

ADS7800AH Same ADS7800 family member for temperature- and packaging-based selection Dipergunakan di: Industrial Process Measurement, Transducer Data Acquisition, Power and Equipment Monitoring ADS7800Y Same-family 24-pin DIP ADC option Dipergunakan di: Industrial Process Measurement, Digital Voltmeter and Panel Meter, Embedded Control System, Laboratory Signal Acquisition, Power and Equipment Monitoring ADS7800YP Same-family 24-pin plastic DIP measurement ADC Dipergunakan di: Digital Voltmeter and Panel Meter, Embedded Control System, Laboratory Signal Acquisition ADS7800BH ADS7800 family option considered during environment-based selection Dipergunakan di: Transducer Data Acquisition
What is the Texas Instruments ADS7800JP?
The ADS7800JP is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a 3 microsecond conversion time in a 24-pin plastic DIP package. According to the Texas Instruments ADS7800 datasheet, it includes an internal sample-and-hold circuit, reference, clock, microprocessor interface, and three-state output drivers for compact standalone data-acquisition designs.
What is the conversion speed and resolution of ADS7800JP?
The ADS7800JP converts a single analog input to a 12-bit result with a stated conversion time of 3 microseconds. The Texas Instruments datasheet describes the ADS7800 as a CMOS successive-approximation converter with an internal sample-and-hold circuit, making it suitable for instrumentation, process measurement, and embedded control loops.
What supply voltages does ADS7800JP require?
The ADS7800JP operates from a +5 V supply and requires either a -12 V or -15 V negative supply. According to the Texas Instruments ADS7800 product page, the negative supply supports bipolar analog input operation, while the ADS7800JP's 24-pin plastic DIP package provides separate connections for analog, reference, logic, and negative-supply functions.
Where can I download the ADS7800JP datasheet PDF?
The official ADS7800JP datasheet PDF is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/ads7800.pdf. The document provides the device description, electrical characteristics, pin information, operating details, and application guidance. The same ADC family is also documented on the manufacturer's ADS7800 product page.
Where can I find the ADS7800JP pinout?
The ADS7800JP pin assignments are shown in the pin-configuration section of the official Texas Instruments ADS7800 datasheet. The JP ordering code uses a 24-pin plastic DIP, and the package drawing identifies the physical orientation and pin numbering. Use that diagram when assigning analog inputs, supplies, control signals, and digital data-bus connections on the PCB.
What can replace the ADS7800JP?
The ADS7800Y and ADS7800YP are same-family Texas Instruments choices for a 24-pin plastic DIP footprint, with operating-temperature grade as the primary selection criterion. ADS7800Y targets the 0°C to +70°C grade, while ADS7800YP and ADS7800JP belong to the -40°C to +85°C grade. Verify pinout, supply requirements, and timing against the datasheet before substitution.
Is ADS7800Y pin-compatible with ADS7800JP?
Yes, the ADS7800Y is a same-family 24-pin plastic DIP option with a pin-compatible ADS7800 architecture, making it a practical drop-in candidate when its 0°C to +70°C operating range is adequate. Compared with the ADS7800JP's -40°C to +85°C grade, the upper temperature limit is 15°C lower, so it is unsuitable for applications extending to +85°C.
ADS7800JP vs ADS7800Y — which operating temperature range should I choose?
Choose the ADS7800JP for industrial equipment requiring operation from -40°C to +85°C. Choose the ADS7800Y when the application remains within 0°C to +70°C and either part's 12-bit resolution, 3 microsecond conversion time, and 24-pin plastic DIP interface are otherwise acceptable. The two choices differ in temperature qualification rather than resolution or conversion speed.
When should I choose ADS7800JP instead of ADS7800Y?
Select ADS7800JP when the enclosure can reach temperatures above +70°C or below 0°C. Its -40°C to +85°C operating range covers a broader environmental envelope than the 0°C to +70°C ADS7800Y grade. For room-temperature laboratory equipment, ADS7800Y may be sufficient, but the complete signal chain and enclosure temperature should be checked before selecting it.
Is ADS7800JP suitable for industrial process measurement?
The ADS7800JP is suitable for industrial process measurement when the system operates within -40°C to +85°C and requires a compact, single-channel ADC. Its 12-bit resolution and 3 microsecond conversion time suit many pressure, temperature, level, and current-loop measurement systems. Analog input conditioning must keep transients and signals within the converter's specified input and supply ranges.
How should an ADS7800JP interface connect to a microprocessor?
The ADS7800JP provides a microprocessor-compatible parallel interface and three-state output drivers. According to the Texas Instruments datasheet, the converter uses internal sampling and conversion functions, so the host must issue the required control sequence and read the 12-bit result through the digital bus. Tie or control the tri-state outputs so they do not contend with other bus devices.
What design considerations matter for ADS7800JP power supplies?
The ADS7800JP requires a +5 V supply and either -12 V or -15 V, so its supply architecture differs from a conventional +5 V-only ADC. The Texas Instruments datasheet identifies the device's supply and analog-reference requirements. Decouple the supply and reference pins near the package, maintain the specified sequencing where applicable, and keep high-current switching nodes and inductors physically separated from the analog input path.
Where can I buy ADS7800JP and what is its lead time?
Use the Request a Quote form on this page to request ADS7800JP availability, current lead time, and order quantities. The manufacturer's product page lists the ADS7800 family in 24-pin plastic DIP and SOIC packages, while the JP ordering code identifies the 24-pin plastic DIP version. Current production allocation should be confirmed when the quotation is prepared.
What is the price of ADS7800JP?
The current ADS7800JP unit price and available quantity are obtained through the Request a Quote form on this page. Pricing depends on order quantity, lead time, and current production allocation. The product is listed as a 12-bit, 3 microsecond, single-input SAR ADC in a 24-pin plastic DIP package, so request the exact JP suffix when seeking a quotation.
Is ADS7800JP in stock?
ADS7800JP availability should be confirmed through the Request a Quote form on this page because inventory and production allocation can change. The form should receive the required quantity, target date, and any approved alternate grade. Do not substitute a different package or suffix without reviewing the pinout, temperature range, and supply requirements.
What are the key ADS7800JP specifications for engineering selection?
The key ADS7800JP specifications are 12-bit resolution, one analog input, a 3 microsecond conversion time, and a 24-pin plastic DIP package. According to the Texas Instruments ADS7800 datasheet, the converter also integrates the sample-and-hold circuit, reference, clock, parallel microprocessor interface, and three-state output drivers. It requires +5 V and either -12 V or -15 V.

Data referensi kejuruteraan untuk ADS7800JP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADS7800JP for single-channel, 12-bit measurements requiring a 3 microsecond conversion time and operation from -40°C to +85°C. Its 24-pin plastic DIP package is convenient for prototypes, legacy systems, and through-hole maintenance designs, while the integrated sample-and-hold circuit, reference, clock, parallel interface, and three-state drivers simplify implementation. ADS7800YP is the closest same-family choice when the required electrical performance and temperature range match exactly. ADS7800Y can replace it when equipment remains within 0°C to +70°C and the broader ADS7800JP temperature qualification is unnecessary. Neither substitute should be selected solely by suffix: verify pin assignments, supply requirements, conversion timing, and analog input range against the official datasheet before approving a replacement.

Perbandingan dengan Gantian

Parametr Produk Ini ADS7800Y ADS7800YP
Brand Texas Instruments Texas Instruments Texas Instruments
Package 24-pin plastic DIP 24-pin plastic DIP 24-pin plastic DIP
Resolution 12 bit 12 bit 12 bit
Conversion Time 3 us 3 us 3 us
Architecture Successive approximation Successive approximation Successive approximation
Analog Input Channels 1 channel 1 channel 1 channel
Positive Supply +5 V +5 V +5 V
Negative Supply -12 V or -15 V -12 V or -15 V -12 V or -15 V
Operating Temperature Range -40°C to +85°C 0°C to +70°C -40°C to +85°C
Digital Output Microprocessor-compatible parallel interface with three-state drivers Microprocessor-compatible parallel interface with three-state drivers Microprocessor-compatible parallel interface with three-state drivers

Penyeberangsung Jelas

  • Broader upper temperature rating than ADS7800Y (vsADS7800Y)
  • Matches the extended-temperature performance of ADS7800YP (vsADS7800YP)
  • Integrated converter functions reduce external support circuitry (vsADS7800Y)

Catatan Desain

Plan the ADS7800JP power architecture around +5 V and either -12 V or -15 V rather than treating it as a single-supply converter. Bypass the positive and negative rails near the package, maintain the supply magnitudes specified in the Texas Instruments datasheet, and verify startup sequencing before enabling the analog input. A negative rail generated by a switching converter should be filtered to prevent converter ripple from appearing directly at the ADC input.

Use the manufacturer's pin-configuration drawing to place the 24-pin DIP correctly, and route the analog input directly to its assigned pin with a short trace. Place input filtering, reference bypass, and supply-decoupling capacitors close to the associated device pins. Keep switching-regulator outputs, inductors, and high-current return paths away from the analog input; their radiated and conducted noise can dominate the performance of a 12-bit measurement channel.

Do not assume that a higher-resolution replacement is automatically interchangeable. Before fitting ADS7800Y or ADS7800YP, confirm the plastic DIP footprint, pin names, +5 V and negative-supply requirements, 12-bit output coding, acquisition timing, and three-state bus behavior. In particular, ADS7800Y has a 0°C to +70°C range, so using it in an enclosure expected to exceed +70°C creates a thermal-qualification failure risk.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The ADS7800 is an industrial analog converter rather than an AEC-Q100-qualified automotive device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not identified.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADS7800JP datasheet ADS7800JP pinout ADS7800JP datasheet pdf ADS7800JP application circuit ADS7800JP equivalent ADS7800JP replacement ADS7800JP vs ADS7800Y ADS7800JP vs ADS7800YP Texas Instruments ADS7800JP ADS7800 24-PDIP ADC ADS7800JP 12 bit ADC ADS7800JP price ADS7800JP stock ADS7800JP 3 us conversion ADS7800JP footprint

Komponen dan Tanda berkaitan

Texas Instruments ADS7800JP ADS7800Y ADS7800YP ADS7800AH ADS7800BH Analog-to-digital converter ADC Successive approximation ADC SAR Data acquisition 12-bit resolution 3 microsecond conversion time Sample-and-hold Internal reference Microprocessor interface Three-state output driver 24-pin plastic DIP DIP package Through-hole package Single-ended analog input Industrial process control Digital voltmeter Transducer instrumentation +5 V supply
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ