Analog Devices

ADV7189BBSTZ - 12-Bit Video Decoder | Analog Devices

MPN: ADV7189BBSTZ ✗ Akhir Hayat
3.15 V to 3.45 V Vdss NTSC, PAL, and SECAM Rds(on) 80-LQFP (14 mm x 14 mm) Package
MOQ: 1 |

ADV7189BBSTZ Ringkasan

The Analog Devices ADV7189BBSTZ is a high-performance 12-bit analog video decoder with noise-shaped video ADCs, supplied in an 80-lead LQFP package measuring 14 mm by 14 mm. It is designed to detect and convert standard analog baseband television signals into digital component-video data, making it suitable for set-top boxes, video players, recorders, and related television-processing equipment. The device supports a 3.15 V to 3.45 V analog operating-supply range and a 1.65 V to 2 V digital operating-supply range.

A video decoder is an interface IC that converts analog luminance, chrominance, and synchronization information into digital pixels that a host processor, scaler, display controller, or video processor can use. The ADV7189BBSTZ belongs to the video-decoder category within interface ICs and combines analog front-end conversion with digital video-output processing. Its 12-bit conversion architecture is intended to preserve additional signal detail compared with lower-resolution decoder implementations while supporting widely deployed television standards.

The key technical feature of the ADV7189BBSTZ is its use of noise-shaped video ADCs. Noise shaping redistributes quantization noise away from the most useful portion of the video bandwidth, allowing the decoder to achieve high effective resolution without requiring every output bit to provide equivalent visual improvement. The component supports programmable analog and digital interfaces and is intended for embedded video systems where analog composite or baseband video must be converted into a standardized digital data stream.

Typical deployments include analog television input stages in set-top boxes, video-player and recorder products, television capture equipment, and industrial video panels. In these systems, the decoder can accept an analog television signal and present a digital component-video output to downstream processing logic. System partitioning should account for the separate analog and digital supply domains because the correct sequencing and voltage levels of both rails directly affect signal integrity and decoder operation.

The 80-lead LQFP package exposes the analog inputs, digital video interface, power domains, control signals, reference connections, and support pins needed for a complete decoder implementation. Because this package has many dedicated connections, PCB layout should preserve controlled return paths around the analog front end while keeping digital clock and data routing away from sensitive input nodes. Designers should follow the manufacturer's pin-description table and reference circuit when assigning tracks and selecting bypass capacitance.

This product page combines the manufacturer's product information, distributor package and supply details, documented decoder capabilities, and practical interface-design considerations. It also distinguishes the ADV7189B family's lifecycle position from the requirements of new designs, helping engineers assess whether the device remains appropriate for an existing platform or whether a redesign is preferable.

Pilihan pengganti yang segera untuk ADV7189BBSTZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

ADV7189BBSTZ Spesifikasi

Product Type Video decoder IC
Converter Resolution 12 bit
ADC Architecture Noise-shaped video ADCs
Analog Operating Supply Voltage 3.15 V to 3.45 V
Digital Operating Supply Voltage 1.65 V to 2 V
Supported Video Standards NTSC, PAL, and SECAM
Digital Video Output Format 4:2:2 component video data
Supported Digital Output Widths 20-bit, 16-bit, 10-bit, and 8-bit CCIR601/CCIR656
Kemasan 80-LQFP (14 mm x 14 mm)
Jenis Pemasangan SMD
Primary Applications Set-top boxes, video players, and recorders
Manufacturer Product Family ADV7189B
Manufacturer Lifecycle Recommendation Not recommended for new designs
Datasheet Revision Rev. B

Panduan Konfigurasi Pin ADV7189BBSTZ 80-lqfp (14 mm x 14 mm)

Konfigurasi pin untuk ADV7189BBSTZ (80-lqfp (14 mm x 14 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 80-lqfp (14 mm x 14 mm) untuk ADV7189BBSTZ

Tiada data garisan pin yang diperoleh untuk ADV7189BBSTZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADV7189BBSTZ patut untuk 6 aplikasis: Analog Television Set-Top Box, Analog Video Player, Video Recorder Front End, Analog Video Capture Equipment, Industrial Video Panel Interface, Regional Television Compatibility Front End.

📺

Analog Television Set-Top Box

The ADV7189BBSTZ fits an analog television front end because it automatically detects NTSC, PAL, and SECAM baseband signals and converts them into 4:2:2 component-video data. Its 12-bit noise-shaped video ADCs provide the conversion resolution needed before chroma processing and digital scaling. The decoder can deliver 20-bit, 16-bit, 10-bit, or 8-bit CCIR601/CCIR656 output, allowing the set-top-box architecture to match output width to the downstream processor and board-routing constraints. Separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital supplies require careful partitioning and decoupling. For an established product, its 80-LQFP footprint supports prior hardware; for a new platform, lifecycle status should be considered before committing the design.

📱

Analog Video Player

The ADV7189BBSTZ is suitable for the analog input stage of a video player that must accept worldwide composite or baseband television formats. Automatic NTSC, PAL, and SECAM detection reduces the need for separate decoder hardware, while the 4:2:2 output provides a conventional digital-video interface for scaling, display conversion, recording, or system-on-chip input. The selectable 20-, 16-, 10-, and 8-bit CCIR601/CCIR656 widths permit a tradeoff between data rate, external interface complexity, and video-processing granularity. Its 80-LQFP package is substantial for a high-pin-count mixed-signal device but simplifies access to analog, digital, clock, and control connections.

📺

Video Recorder Front End

In a video recorder, the ADV7189BBSTZ can convert an incoming analog television signal into digital component-video data for downstream compression, storage, or display processing. The 12-bit conversion stage and noise-shaped ADC architecture support the preservation of detail across a wider useful video bandwidth than a visibly lower-resolution conversion path. The decoder handles NTSC, PAL, and SECAM standards, which is useful for multi-region products, and supports four digital-output widths for balancing processor bandwidth against PCB routing. Clocking, data timing, synchronization, and power sequencing must be implemented according to the manufacturer's reference design.

🎥

Analog Video Capture Equipment

The ADV7189BBSTZ can serve as the analog television decoding stage in capture, monitoring, and industrial video equipment that needs standardized digital pixels for later processing. Its support for NTSC, PAL, and SECAM makes it useful where the input source may vary by region, while automatic standard detection simplifies control firmware. The 4:2:2 output and selectable CCIR601/CCIR656 widths provide compatibility with scalable digital pipelines. Layout should isolate the analog input and supply paths from the digital interface, use the manufacturer's recommended bypass network, and verify timing margin with the intended graphics or processor interface.

🖥️

Industrial Video Panel Interface

The ADV7189BBSTZ can provide the analog-to-digital conversion stage for an industrial video panel that accepts legacy television signals and displays processed content on a modern LCD or embedded display controller. Its automatic handling of NTSC, PAL, and SECAM reduces the regional variation that would otherwise complicate product configuration. The 3.15 V to 3.45 V analog and 1.65 V to 2 V digital domains should be regulated independently, with careful return-current planning beneath the mixed-signal IC. Because the manufacturer marks the ADV7189B family as not recommended for new designs, this application is most appropriate for an existing industrial platform requiring a controlled continuity strategy.

🌐

Regional Television Compatibility Front End

The ADV7189BBSTZ addresses regional television compatibility by detecting NTSC, PAL, and SECAM and producing a common digital component-video stream. This allows one hardware platform to accept signals from multiple broadcast standards while software and downstream scaling operate on a consistent interface. The 4:2:2 output can use 20-, 16-, 10-, or 8-bit CCIR601/CCIR656 signaling, allowing the designer to select the best balance of throughput and routing density. Production testing should cover representative input standards and the required operating-temperature range, while supply planning should account for the family's not-recommended-for-new-designs lifecycle position.

What is the ADV7189BBSTZ?
The ADV7189BBSTZ is a 12-bit analog video decoder with noise-shaped video ADCs from Analog Devices. It detects and converts NTSC, PAL, and SECAM analog baseband television signals into 4:2:2 component-video data and supports 20-bit, 16-bit, 10-bit, and 8-bit CCIR601/CCIR656 output formats. According to the Analog Devices ADV7189B product page, the device is offered in an 80-LQFP package for set-top boxes, video players, and recorders.
What are the key specifications of ADV7189BBSTZ that engineers should know?
The ADV7189BBSTZ is a 12-bit video decoder using noise-shaped video ADCs, with a 3.15 V to 3.45 V analog supply and a 1.65 V to 2 V digital supply. It converts NTSC, PAL, and SECAM signals into 4:2:2 component-video data with selectable 20-bit, 16-bit, 10-bit, or 8-bit CCIR601/CCIR656 output. The Analog Devices product page identifies the 80-LQFP package and marks the ADV7189B family as not recommended for new designs.
What video standards does ADV7189BBSTZ support?
The ADV7189BBSTZ supports NTSC, PAL, and SECAM analog baseband television standards. It automatically detects the incoming standard and converts the analog signal into 4:2:2 component-video data suitable for downstream digital video processing. According to the ADV7189 manufacturer documentation, the decoder can provide 20-bit, 16-bit, 10-bit, or 8-bit CCIR601/CCIR656 data, allowing the host system to balance interface width, board-routing density, and processing requirements.
What supply voltage does ADV7189BBSTZ require?
The ADV7189BBSTZ requires a 3.15 V to 3.45 V operating supply for its analog domain and a 1.65 V to 2 V operating supply for its digital domain. These are separate supply rails, so a system designer must provide appropriate regulation, decoupling, and power sequencing. The listed voltage ranges are confirmed by the ADV7189BBSTZ technical listing and should be checked against the manufacturer's pin descriptions when implementing the reference circuit.
Where can I download the ADV7189BBSTZ datasheet?
The ADV7189BBSTZ datasheet is available from the Analog Devices ADV7189B product page at https://www.analog.com/en/products/adv7189b.html. That page identifies the product as a high-performance 12-bit video decoder with noise-shaped video ADCs and links to the Data Sheet, Rev. B. Use the manufacturer document for the complete pin-description table, electrical characteristics, timing data, reference circuit, and package drawing.
Where can I find the ADV7189BBSTZ pinout?
The definitive ADV7189BBSTZ pinout is in the pin-description table and package drawing in the Analog Devices ADV7189B Data Sheet, Rev. B, linked from the manufacturer's product page. The device uses an 80-LQFP package, so its 80 physical leads must be assigned according to the manufacturer's pin table rather than inferred from the distributor summary. Use that table to distinguish analog inputs, digital outputs, supplies, grounds, clock inputs, control signals, and no-connect positions.
What is the ADV7189BBSTZ package?
The ADV7189BBSTZ is packaged in an 80-lead LQFP measuring 14 mm by 14 mm and is intended for surface-mount assembly. The 80-LQFP designation is confirmed by the product and distributor listings. Because the device exposes separate analog and digital signal groups across numerous leads, PCB layout should follow the manufacturer's reference design for component placement, supply partitioning, grounding, and high-speed digital routing.
Where can I buy ADV7189BBSTZ and request a quote?
Use the Request a Quote form on this page to request the ADV7189BBSTZ, current commercial terms, and available delivery quantity. The component is listed by multiple authorized distribution channels, but pricing and stock can change independently by package suffix and order quantity. A formal quote through the form is the appropriate route for current price, minimum order quantity, lead time, and supply confirmation.
What is the current price of ADV7189BBSTZ?
The current commercial price for ADV7189BBSTZ depends on order quantity, supply status, and the requested shipment terms. Use the Request a Quote form on this page to obtain the applicable unit pricing and quantity breaks. No static price is quoted here because market pricing changes and the manufacturer lists the ADV7189B family as not recommended for new designs.
What is the lead time for ADV7189BBSTZ?
The lead time for ADV7189BBSTZ should be confirmed through the Request a Quote form on this page. Availability can vary with order size and inventory movement, particularly for a product family that Analog Devices identifies as not recommended for new designs. Request the quoted lead time, scheduled delivery date, minimum order quantity, and lot traceability together so that production planning receives actionable supply information.
Is ADV7189BBSTZ in stock?
Current ADV7189BBSTZ inventory should be confirmed through the Request a Quote form on this page. Distributor listings indicate that the part is marketed for purchase, but a listing alone does not establish a guaranteed stock quantity for a requested production schedule. Specify the required quantity, date code preference, target price, and delivery location when requesting the quotation.
When should I choose ADV7189BBSTZ over an alternative decoder?
Choose the ADV7189BBSTZ when an existing design specifically requires its 12-bit noise-shaped ADC architecture, supported NTSC/PAL/SECAM input set, 4:2:2 output, and 80-LQFP pin arrangement. It is most appropriate for maintaining a proven television-product platform because Analog Devices states that the ADV7189B family is not recommended for new designs. For a new platform, evaluate current video-decoder families that provide the required interface and lifecycle support.
Is ADV7189BBSTZ suitable for a new set-top-box design?
The ADV7189BBSTZ is technically suited to set-top-box, video-player, and recorder products because it supports NTSC, PAL, and SECAM decoding and 4:2:2 digital video output. However, Analog Devices marks the ADV7189B family as not recommended for new designs. It is therefore more appropriate for sustaining an existing platform than for initiating a new design unless lifecycle and sourcing risks are explicitly accepted and mitigated.
What can replace ADV7189BBSTZ?
No verified drop-in replacement for the ADV7189BBSTZ was identified in the available manufacturer and cross-reference results. A true replacement must preserve the 80-LQFP footprint, pin assignments, supply architecture, supported video standards, digital-output modes, and timing behavior. Because the ADV7189B family is not recommended for new designs, obtain a manufacturer-supported migration path or validate a candidate electrically and visually before treating it as a drop-in substitute.
Is ADV7189BBSTZ the same as ADV7189B?
ADV7189BBSTZ is the orderable Analog Devices suffix associated with the ADV7189B high-performance 12-bit video decoder family. The BB suffix identifies the specified 80-LQFP package arrangement, while B identifies the product revision or family generation shown on the manufacturer's page. The complete ordering code should be used for procurement because suffix differences can change package, temperature, or qualification characteristics.
Can a different-brand decoder replace ADV7189BBSTZ?
A different-brand decoder should not be treated as a drop-in replacement for the ADV7189BBSTZ without explicit pin-compatibility and timing validation. The replacement would need to use the same 80-LQFP footprint and reproduce the analog input behavior, 3.15 V to 3.45 V analog rail, 1.65 V to 2 V digital rail, NTSC/PAL/SECAM decoding, 4:2:2 processing, and required CCIR601/CCIR656 output modes. No cross-brand drop-in equivalent was confirmed in the available cross-reference results.

Data referensi kejuruteraan untuk ADV7189BBSTZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADV7189BBSTZ when maintaining a proven analog-video platform that specifically requires a 12-bit noise-shaped ADC decoder, automatic NTSC/PAL/SECAM detection, 4:2:2 output, and the established 80-LQFP footprint. Its separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital supplies make it suitable for mixed-signal television designs whose upstream and downstream interfaces already match those requirements. For a new product, first evaluate currently recommended decoder families because Analog Devices marks the ADV7189B series as not recommended for new designs. If procurement continuity is the priority, request lot availability, traceability, and an end-of-life plan through the Request a Quote form. No verified drop-in substitute was established, so a different decoder should not be approved solely because it uses an 80-LQFP package; its pinout, timing, analog performance, standards support, and supply requirements must be validated independently.

Penyeberangsung Jelas

  • 12-bit conversion with noise-shaped video ADCs (vsADV7189B)
  • Multi-standard analog input support (vsADV7189B)
  • Selectable digital output widths (vsADV7189B)

Catatan Desain

Treat the analog input and digital output sections as separate routing domains. Place the manufacturer's recommended input and bypass components directly beside the corresponding ADV7189BBSTZ pins, provide an uninterrupted ground connection for the analog section, and route clock and video-data traces away from sensitive analog inputs. The 80-LQFP footprint provides many external connections, but placement quality remains important because a large lead count does not prevent ground-current coupling if return paths are poorly arranged.

Design separate, well-regulated rails for the 3.15 V to 3.45 V analog domain and 1.65 V to 2 V digital domain. Follow the manufacturer reference circuit for component values, capacitor selection, and startup behavior. Check power-up ordering against downstream logic so the decoder and connected processor do not see an undefined interface during ramp-up. Use the datasheet's absolute maximum ratings and recommended operating conditions when defining tolerances and transient margins.

Preserve the timing relationship between the digital clock, synchronization signals, and CCIR601/CCIR656 data outputs. Match trace lengths where the interface topology requires it, maintain continuous reference planes beneath high-speed routes, and keep simultaneous switching outputs away from analog reference and input networks. Validate setup and hold margins at the intended digital supply voltage and system clock rather than relying only on nominal timing values.

Do not treat the ADV7189B family as a preferred component for an unqualified new launch. The manufacturer identifies it as not recommended for new designs, which creates lifecycle and continuity risk even if the decoder functions correctly in a prototype. For an existing product, document the exact suffix, package, test coverage, approved alternate parts, and end-of-life monitoring plan. For a new design, evaluate a currently recommended decoder before committing the PCB footprint.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page and product listing identify the ADV7189B family and its not-recommended-for-new-designs lifecycle position, but the available material does not explicitly state the requested compliance certifications.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADV7189BBSTZ datasheet ADV7189BBSTZ specifications ADV7189BBSTZ pinout ADV7189BBSTZ datasheet pdf ADV7189BBSTZ equivalent ADV7189BBSTZ replacement ADV7189BBSTZ cross reference ADV7189BBSTZ price ADV7189BBSTZ stock Analog Devices ADV7189BBSTZ ADV7189BBSTZ 80-LQFP ADV7189BBSTZ 12-bit video decoder ADV7189BBSTZ set-top box ADV7189B vs ADV7189BBSTZ

Komponen dan Tanda berkaitan

Analog Devices ADV7189BBSTZ ADV7189B video decoder IC analog video decoder interface IC video IC noise-shaped video ADC 12-bit ADC NTSC PAL SECAM 4:2:2 component video CCIR601 CCIR656 80-LQFP LQFP package 14 mm by 14 mm package surface-mount device 3.15 V to 3.45 V analog supply 1.65 V to 2 V digital supply automatic standard detection set-top box video player video recorder mixed-signal interface
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ