ADV7189BBSTZ - 12-Bit Video Decoder | Analog Devices
料号: ADV7189BBSTZ ✗ 停产ADV7189BBSTZ 概述
A video decoder is an interface IC that converts analog luminance, chrominance, and synchronization information into digital pixels that a host processor, scaler, display controller, or video processor can use. The ADV7189BBSTZ belongs to the video-decoder category within interface ICs and combines analog front-end conversion with digital video-output processing. Its 12-bit conversion architecture is intended to preserve additional signal detail compared with lower-resolution decoder implementations while supporting widely deployed television standards.
The key technical feature of the ADV7189BBSTZ is its use of noise-shaped video ADCs. Noise shaping redistributes quantization noise away from the most useful portion of the video bandwidth, allowing the decoder to achieve high effective resolution without requiring every output bit to provide equivalent visual improvement. The component supports programmable analog and digital interfaces and is intended for embedded video systems where analog composite or baseband video must be converted into a standardized digital data stream.
Typical deployments include analog television input stages in set-top boxes, video-player and recorder products, television capture equipment, and industrial video panels. In these systems, the decoder can accept an analog television signal and present a digital component-video output to downstream processing logic. System partitioning should account for the separate analog and digital supply domains because the correct sequencing and voltage levels of both rails directly affect signal integrity and decoder operation.
The 80-lead LQFP package exposes the analog inputs, digital video interface, power domains, control signals, reference connections, and support pins needed for a complete decoder implementation. Because this package has many dedicated connections, PCB layout should preserve controlled return paths around the analog front end while keeping digital clock and data routing away from sensitive input nodes. Designers should follow the manufacturer's pin-description table and reference circuit when assigning tracks and selecting bypass capacitance.
This product page combines the manufacturer's product information, distributor package and supply details, documented decoder capabilities, and practical interface-design considerations. It also distinguishes the ADV7189B family's lifecycle position from the requirements of new designs, helping engineers assess whether the device remains appropriate for an existing platform or whether a redesign is preferable.
直接替换替代料: ADV7189BBSTZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料ADV7189BBSTZ 规格参数
| Product Type | Video decoder IC |
| Converter Resolution | 12 bit |
| ADC Architecture | Noise-shaped video ADCs |
| Analog Operating Supply Voltage | 3.15 V to 3.45 V |
| Digital Operating Supply Voltage | 1.65 V to 2 V |
| Supported Video Standards | NTSC, PAL, and SECAM |
| Digital Video Output Format | 4:2:2 component video data |
| Supported Digital Output Widths | 20-bit, 16-bit, 10-bit, and 8-bit CCIR601/CCIR656 |
| 封装 | 80-LQFP (14 mm x 14 mm) |
| 安装类型 | SMD |
| Primary Applications | Set-top boxes, video players, and recorders |
| Manufacturer Product Family | ADV7189B |
| Manufacturer Lifecycle Recommendation | Not recommended for new designs |
| Datasheet Revision | Rev. B |
ADV7189BBSTZ 80-lqfp (14 mm x 14 mm) 引脚配置指南
ADV7189BBSTZ(80-lqfp (14 mm x 14 mm) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADV7189BBSTZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV7189BBSTZ 适用于 6 应用s: Analog Television Set-Top Box, Analog Video Player, Video Recorder Front End, Analog Video Capture Equipment, Industrial Video Panel Interface, Regional Television Compatibility Front End.
Analog Television Set-Top Box
The ADV7189BBSTZ fits an analog television front end because it automatically detects NTSC, PAL, and SECAM baseband signals and converts them into 4:2:2 component-video data. Its 12-bit noise-shaped video ADCs provide the conversion resolution needed before chroma processing and digital scaling. The decoder can deliver 20-bit, 16-bit, 10-bit, or 8-bit CCIR601/CCIR656 output, allowing the set-top-box architecture to match output width to the downstream processor and board-routing constraints. Separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital supplies require careful partitioning and decoupling. For an established product, its 80-LQFP footprint supports prior hardware; for a new platform, lifecycle status should be considered before committing the design.
推荐
Analog Video Player
The ADV7189BBSTZ is suitable for the analog input stage of a video player that must accept worldwide composite or baseband television formats. Automatic NTSC, PAL, and SECAM detection reduces the need for separate decoder hardware, while the 4:2:2 output provides a conventional digital-video interface for scaling, display conversion, recording, or system-on-chip input. The selectable 20-, 16-, 10-, and 8-bit CCIR601/CCIR656 widths permit a tradeoff between data rate, external interface complexity, and video-processing granularity. Its 80-LQFP package is substantial for a high-pin-count mixed-signal device but simplifies access to analog, digital, clock, and control connections.
推荐
Video Recorder Front End
In a video recorder, the ADV7189BBSTZ can convert an incoming analog television signal into digital component-video data for downstream compression, storage, or display processing. The 12-bit conversion stage and noise-shaped ADC architecture support the preservation of detail across a wider useful video bandwidth than a visibly lower-resolution conversion path. The decoder handles NTSC, PAL, and SECAM standards, which is useful for multi-region products, and supports four digital-output widths for balancing processor bandwidth against PCB routing. Clocking, data timing, synchronization, and power sequencing must be implemented according to the manufacturer's reference design.
推荐
Analog Video Capture Equipment
The ADV7189BBSTZ can serve as the analog television decoding stage in capture, monitoring, and industrial video equipment that needs standardized digital pixels for later processing. Its support for NTSC, PAL, and SECAM makes it useful where the input source may vary by region, while automatic standard detection simplifies control firmware. The 4:2:2 output and selectable CCIR601/CCIR656 widths provide compatibility with scalable digital pipelines. Layout should isolate the analog input and supply paths from the digital interface, use the manufacturer's recommended bypass network, and verify timing margin with the intended graphics or processor interface.
推荐
Industrial Video Panel Interface
The ADV7189BBSTZ can provide the analog-to-digital conversion stage for an industrial video panel that accepts legacy television signals and displays processed content on a modern LCD or embedded display controller. Its automatic handling of NTSC, PAL, and SECAM reduces the regional variation that would otherwise complicate product configuration. The 3.15 V to 3.45 V analog and 1.65 V to 2 V digital domains should be regulated independently, with careful return-current planning beneath the mixed-signal IC. Because the manufacturer marks the ADV7189B family as not recommended for new designs, this application is most appropriate for an existing industrial platform requiring a controlled continuity strategy.
推荐
Regional Television Compatibility Front End
The ADV7189BBSTZ addresses regional television compatibility by detecting NTSC, PAL, and SECAM and producing a common digital component-video stream. This allows one hardware platform to accept signals from multiple broadcast standards while software and downstream scaling operate on a consistent interface. The 4:2:2 output can use 20-, 16-, 10-, or 8-bit CCIR601/CCIR656 signaling, allowing the designer to select the best balance of throughput and routing density. Production testing should cover representative input standards and the required operating-temperature range, while supply planning should account for the family's not-recommended-for-new-designs lifecycle position.
推荐
推荐产品汇总
工程参考数据: ADV7189BBSTZ ——对比、设计指导和合规信息。
选型指南
关键差异点
- 12-bit conversion with noise-shaped video ADCs (对比 ADV7189B)
- Multi-standard analog input support (对比 ADV7189B)
- Selectable digital output widths (对比 ADV7189B)
设计说明
Treat the analog input and digital output sections as separate routing domains. Place the manufacturer's recommended input and bypass components directly beside the corresponding ADV7189BBSTZ pins, provide an uninterrupted ground connection for the analog section, and route clock and video-data traces away from sensitive analog inputs. The 80-LQFP footprint provides many external connections, but placement quality remains important because a large lead count does not prevent ground-current coupling if return paths are poorly arranged.
Design separate, well-regulated rails for the 3.15 V to 3.45 V analog domain and 1.65 V to 2 V digital domain. Follow the manufacturer reference circuit for component values, capacitor selection, and startup behavior. Check power-up ordering against downstream logic so the decoder and connected processor do not see an undefined interface during ramp-up. Use the datasheet's absolute maximum ratings and recommended operating conditions when defining tolerances and transient margins.
Preserve the timing relationship between the digital clock, synchronization signals, and CCIR601/CCIR656 data outputs. Match trace lengths where the interface topology requires it, maintain continuous reference planes beneath high-speed routes, and keep simultaneous switching outputs away from analog reference and input networks. Validate setup and hold margins at the intended digital supply voltage and system clock rather than relying only on nominal timing values.
Do not treat the ADV7189B family as a preferred component for an unqualified new launch. The manufacturer identifies it as not recommended for new designs, which creates lifecycle and continuity risk even if the decoder functions correctly in a prototype. For an existing product, document the exact suffix, package, test coverage, approved alternate parts, and end-of-life monitoring plan. For a new design, evaluate a currently recommended decoder before committing the PCB footprint.
合规信息
The manufacturer product page and product listing identify the ADV7189B family and its not-recommended-for-new-designs lifecycle position, but the available material does not explicitly state the requested compliance certifications.