AK4426VT - 24-Bit 192kHz Stereo DAC | Asahi Kasei Microdevices
MPN: AK4426VT ✓ AktifAK4426VT Ringkasan
A stereo DAC converts digital audio samples into voltage signals suitable for amplification by an audio output stage. Within the signal chain, the AK4426VT sits between an audio decoder, USB or network audio interface, and an analog mixer or amplifier. Its resolution and sampling-rate support make it applicable to CD, DVD, broadcast, home-theater, and other digital audio systems where accurate reconstruction of left and right channels is required.
The principal features include 24-bit resolution, operation up to 192 kHz, 5 V power supply, 2 Vrms buffered output, I2C control, SPI control, and an operating temperature range of -40°C to +85°C. A multi-bit modulator architecture supports low distortion, while the integrated output buffer eliminates the need for a separate full-power output amplifier when designing a conventional single-ended analog output stage.
The charge pump is an important internal block because it develops a negative voltage rail needed for ground-referenced single-ended output. This arrangement allows the output stage to swing around ground without requiring a split supply at the DAC pins. The digital and analog sections share the 16-pin TSSOP package, while the supported I2C and SPI interfaces simplify connection to different digital audio controllers and source devices.
Typical applications include multichannel home-theater receivers, CD and DVD player audio channels, digital broadcast equipment, active speakers, USB audio interfaces, and consumer audio products requiring a compact stereo DAC. The 192 kHz capability also supports high-resolution audio paths, although the host interface must transmit compatible audio data and the analog reconstruction requirements must be evaluated for the target bandwidth.
Circuit design should preserve the separation between digital and analog supply paths, connect the charge-pump and analog sections according to the manufacturer recommendations, and provide appropriate output coupling and amplifier headroom for the 2 Vrms signal. PCB placement and return-current paths are important because they can influence measured distortion and channel-to-channel behavior.
This page combines the principal electrical, package, interface, and application characteristics of the AK4426VT with implementation guidance for analog output design, supply routing, PCB layout, and qualification. It also distinguishes direct configuration choices from assumptions that require confirmation against the complete manufacturer datasheet and the finished audio-channel performance target.
Pilihan pengganti yang segera untuk AK4426VT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AK4426VT (sama faktor bentuk dan kaki) — berbeza dalam Output Configuration, Package.
AK4420ET
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AK4420ETP-E2
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AK4426VN
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AK4426VN-E2
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AK4420EN
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AK4426VT Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Stereo audio digital-to-analog converter |
| Pemecahkatan | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Analog Supply Voltage | 5 V |
| Power Supply Pin Range | 4.5 V to 5.5 V |
| Output Level | 2 Vrms |
| Konfigurasi Output | Integrated 2 Vrms output buffer |
| Control Interfaces | I2C and SPI |
| Negative Rail Generation | Integrated charge pump |
| Modulator Architecture | Multi-bit modulator |
| Channel Count | 2 channels |
| Kemasan | 16-pin TSSOP, 0.65 mm pitch |
| Jenis Pemasangan | Surface mount |
| Gambaran Suhu Operasi | -40°C to +85°C |
Panduan Konfigurasi Pin AK4426VT 16-pin tssop, 0.65 mm pitch
Konfigurasi pin untuk AK4426VT (16-pin tssop, 0.65 mm pitch pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk AK4426VT.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AK4426VT patut untuk 6 aplikasis: Home-Theater Receiver DAC Channels, USB Audio Interface Output, CD and DVD Player Audio Outputs, Digital Broadcast Audio Equipment, Active Speaker and Compact Audio Products, Professional Audio Monitoring DAC.
Home-Theater Receiver DAC Channels
The AK4426VT is suitable for left and right stereo decoding channels in a home-theater receiver because it combines 24-bit resolution, operation up to 192 kHz, and a 2 Vrms integrated output buffer in a compact 16-pin TSSOP. Place the converter after the digital audio decoder and before the receiver’s analog mixer or power amplifier. The charge-pump-based negative rail supports ground-referenced single-ended output, reducing the need for a separate output-buffer stage. Confirm the receiver’s expected input impedance, coupling method, and clock topology against the manufacturer recommendations before laying out the channel.
Disebarkan
USB Audio Interface Output
A USB audio interface can use the AK4426VT as its stereo output converter when 24-bit data and sampling rates up to 192 kHz must be supported. The device accepts configuration through I2C or SPI, giving the USB controller or an associated audio codec a selectable control path. Its 5 V analog supply and 2 Vrms output are convenient for a line-level analog section, while the integrated output buffer reduces external active-device count. The design must still account for USB clock recovery, isolation of digital return currents, and the analog noise contributed by the host system.
Disebarkan
CD and DVD Player Audio Outputs
The AK4426VT can provide the final digital-to-analog conversion stage in a CD or DVD player because it supports 24-bit stereo audio, 192 kHz operation, and a buffered 2 Vrms output. Its 16-pin TSSOP package allows the converter to sit close to the decoder and analog output routing, while the integrated charge pump supports ground-referenced output without a negative external supply. For a legacy transport architecture, validate the required digital audio format and serial clocking. For a modern host-based design, ensure that the source and controller support the selected sample rates without unsupported resampling.
Disebarkan
Digital Broadcast Audio Equipment
The AK4426VT fits stereo monitoring and auxiliary audio outputs in digital broadcast equipment where 24-bit reconstruction and a maximum 192 kHz interface rate are useful. Place the DAC at the boundary between decoded broadcast audio and the analog monitoring amplifier, avoiding long digital routes adjacent to sensitive analog nodes. The 2 Vrms buffered output can feed a professional line input when its impedance and common-mode expectations are compatible. Validate channel mapping, mute behavior, clocking, and level calibration as part of the receiver design because transport standards and equipment implementations can impose additional requirements.
Disebarkan
Active Speaker and Compact Audio Products
The AK4426VT can serve as the stereo DAC in an active speaker, compact amplifier, or powered audio product with digital input. Its 16-pin TSSOP package supports space-constrained construction, and the integrated 2 Vrms output buffer can feed a downstream power amplifier when voltage gain and impedance match are suitable. Compared with a discrete converter and output-buffer arrangement, the integrated device can simplify the analog path. Check the amplifier’s input range carefully, provide the correct output coupling network, and keep the DAC and charge-pump return currents out of the sensitive amplifier-reference path.
Disebarkan
Professional Audio Monitoring DAC
The AK4426VT is applicable to stereo monitoring paths in professional audio equipment that require high-resolution conversion and direct analog drive. The 24-bit interface, 192 kHz capability, and 2 Vrms output support a conventional monitoring architecture, while the multi-bit modulator is intended to maintain linearity and distortion performance. The integrated buffer is useful where a full-power discrete output stage would add cost and complexity. Evaluation should include channel balance, output-noise measurement, grounding, and downstream amplifier headroom to confirm that the selected digital source and analog path meet the intended monitoring specification.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AK4426VT — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Catatan Desain
Separate the digital audio return current from the analog output and charge-pump current paths. Place the device-side decoupling according to the manufacturer application diagram, use a continuous ground reference beneath the converter where the package and board construction permit, and route analog outputs away from clock, serial-data, and switching-node traces. These steps reduce the chance that digital return current will modulate the 2 Vrms output and degrade measured channel noise or distortion.
Design the 5 V analog supply to remain within the 4.5 V to 5.5 V power-supply range under startup, load, and temperature conditions. Because the integrated charge pump supports the negative rail required by the output buffer, power-quality disturbances can appear at the analog output. Use local high-frequency bypassing, maintain a low-impedance return, and isolate the converter from noisy digital and power-conversion nodes according to the manufacturer layout guidance.
Do not treat another member of the AK4426 family as a drop-in substitute solely because its resolution and sampling rate appear similar. The replacement must preserve the 16-pin TSSOP footprint, pin functions, supply arrangement, clock requirements, digital format, and control protocol. Confirm every connection against the exact candidate datasheet and review output amplitude, mute behavior, and channel mapping before approving a substitution.
Treat the digital clock and audio interface as potentially critical timing signals. Keep traces short, provide a continuous reference plane, avoid unnecessary stubs, and use source-end termination when the clock topology requires it. The converter’s maximum 192 kHz rate does not remove the need for careful clock routing, because edge quality and return-path discontinuities can influence data recovery and analog conversion performance.
Maklumat Kesediaan
The reviewed product documentation does not state the requested compliance statuses. The AEC-Q100 field is shown as unknown because this is a consumer-market audio converter and no automotive qualification statement was identified.