AKM (Asahi Kasei Microdevices)

AK4426VT - 24-Bit 192kHz Stereo DAC | Asahi Kasei Microdevices

MPN: AK4426VT ✓ 啟用中
5 V Vdss 16-pin TSSOP, 0.65 mm pitch Package
MOQ: 1 |

AK4426VT 概覽

Asahi Kasei Microdevices AK4426VT is a 24-bit stereo digital-to-analog converter operating at up to 192 kHz, with a 5 V analog supply and an integrated 2 Vrms output buffer in a 16-pin TSSOP package. The converter supports I2C and SPI control interfaces, allowing the same device to serve digital audio equipment controlled through either serial protocol. Its integrated buffer produces a ground-referenced 2 Vrms output using an internal negative supply rail generated by a charge pump.

A stereo DAC converts digital audio samples into voltage signals suitable for amplification by an audio output stage. Within the signal chain, the AK4426VT sits between an audio decoder, USB or network audio interface, and an analog mixer or amplifier. Its resolution and sampling-rate support make it applicable to CD, DVD, broadcast, home-theater, and other digital audio systems where accurate reconstruction of left and right channels is required.

The principal features include 24-bit resolution, operation up to 192 kHz, 5 V power supply, 2 Vrms buffered output, I2C control, SPI control, and an operating temperature range of -40°C to +85°C. A multi-bit modulator architecture supports low distortion, while the integrated output buffer eliminates the need for a separate full-power output amplifier when designing a conventional single-ended analog output stage.

The charge pump is an important internal block because it develops a negative voltage rail needed for ground-referenced single-ended output. This arrangement allows the output stage to swing around ground without requiring a split supply at the DAC pins. The digital and analog sections share the 16-pin TSSOP package, while the supported I2C and SPI interfaces simplify connection to different digital audio controllers and source devices.

Typical applications include multichannel home-theater receivers, CD and DVD player audio channels, digital broadcast equipment, active speakers, USB audio interfaces, and consumer audio products requiring a compact stereo DAC. The 192 kHz capability also supports high-resolution audio paths, although the host interface must transmit compatible audio data and the analog reconstruction requirements must be evaluated for the target bandwidth.

Circuit design should preserve the separation between digital and analog supply paths, connect the charge-pump and analog sections according to the manufacturer recommendations, and provide appropriate output coupling and amplifier headroom for the 2 Vrms signal. PCB placement and return-current paths are important because they can influence measured distortion and channel-to-channel behavior.

This page combines the principal electrical, package, interface, and application characteristics of the AK4426VT with implementation guidance for analog output design, supply routing, PCB layout, and qualification. It also distinguishes direct configuration choices from assumptions that require confirmation against the complete manufacturer datasheet and the finished audio-channel performance target.

直接替換替代品,適用於 AK4426VT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AK4426VT (相同外形與佔位) — 差異在於 Output Configuration, Package.

AKM
Output Configuration: 2-channel stereo
Package: 16-pin TSSOP
比較對象 AK4426VT →

AK4420ET

✅ 直接替換
AKM
📦 16-pin TSSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · 5 V · 2-channel stereo · I2S · 2 Vrms · Integrated stereo 2 Vrms buffer

聯絡詢價

查看資料表 →

AK4420ETP-E2

✅ 直接替換
📦 16-pin TSSOP
AK4420ETP-E2 is a related stereo DAC with the same broad TSSOP format; exact electrical and register differences from AK4426VT are not quantified in the verified listing.

📋 參考替代品(不在目錄中)

AK4426VN

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-pin TSSOP
Same AK4426 family and TSSOP footprint, with the ordering suffix indicating a distinct temperature or grade configuration; exact suffix-specific differences require validation.

📋 參考替代品(不在目錄中)

AK4426VN-E2

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-pin TSSOP
Same AK4426 family and TSSOP footprint with an E2 ordering designation; the exact grade, temperature, and marking differences require manufacturer validation.

📋 參考替代品(不在目錄中)

AK4420EN

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-pin TSSOP
AK4420EN is a related AK4420-family DAC in a TSSOP package; its sampling rate, interface, register map, and output stage differ by amounts that are not quantified in the verified listing.

📋 參考替代品(不在目錄中)

AK4426VT 最大額定值與電氣特性

Device Type Stereo audio digital-to-analog converter
解析度 24 bit
Maximum Sampling Rate 192 kHz
Analog Supply Voltage 5 V
Power Supply Pin Range 4.5 V to 5.5 V
Output Level 2 Vrms
輸出配置 Integrated 2 Vrms output buffer
Control Interfaces I2C and SPI
Negative Rail Generation Integrated charge pump
Modulator Architecture Multi-bit modulator
Channel Count 2 channels
封裝 16-pin TSSOP, 0.65 mm pitch
安裝類型 Surface mount
工作溫度範圍 -40°C to +85°C

AK4426VT 16-pin tssop, 0.65 mm pitch 腳位配置指南

AK4426VT(16-pin tssop, 0.65 mm pitch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AK4426VT 的 16-pin tssop, 0.65 mm pitch 封裝腳位圖

無詳細腳位定義資料: AK4426VT.

請參閱 資料表 以查看完整腳位配置。

典型應用

AK4426VT 適用於 6 應用s: Home-Theater Receiver DAC Channels, USB Audio Interface Output, CD and DVD Player Audio Outputs, Digital Broadcast Audio Equipment, Active Speaker and Compact Audio Products, Professional Audio Monitoring DAC.

📺

Home-Theater Receiver DAC Channels

The AK4426VT is suitable for left and right stereo decoding channels in a home-theater receiver because it combines 24-bit resolution, operation up to 192 kHz, and a 2 Vrms integrated output buffer in a compact 16-pin TSSOP. Place the converter after the digital audio decoder and before the receiver’s analog mixer or power amplifier. The charge-pump-based negative rail supports ground-referenced single-ended output, reducing the need for a separate output-buffer stage. Confirm the receiver’s expected input impedance, coupling method, and clock topology against the manufacturer recommendations before laying out the channel.

🖥️

USB Audio Interface Output

A USB audio interface can use the AK4426VT as its stereo output converter when 24-bit data and sampling rates up to 192 kHz must be supported. The device accepts configuration through I2C or SPI, giving the USB controller or an associated audio codec a selectable control path. Its 5 V analog supply and 2 Vrms output are convenient for a line-level analog section, while the integrated output buffer reduces external active-device count. The design must still account for USB clock recovery, isolation of digital return currents, and the analog noise contributed by the host system.

💿

CD and DVD Player Audio Outputs

The AK4426VT can provide the final digital-to-analog conversion stage in a CD or DVD player because it supports 24-bit stereo audio, 192 kHz operation, and a buffered 2 Vrms output. Its 16-pin TSSOP package allows the converter to sit close to the decoder and analog output routing, while the integrated charge pump supports ground-referenced output without a negative external supply. For a legacy transport architecture, validate the required digital audio format and serial clocking. For a modern host-based design, ensure that the source and controller support the selected sample rates without unsupported resampling.

🌐

Digital Broadcast Audio Equipment

The AK4426VT fits stereo monitoring and auxiliary audio outputs in digital broadcast equipment where 24-bit reconstruction and a maximum 192 kHz interface rate are useful. Place the DAC at the boundary between decoded broadcast audio and the analog monitoring amplifier, avoiding long digital routes adjacent to sensitive analog nodes. The 2 Vrms buffered output can feed a professional line input when its impedance and common-mode expectations are compatible. Validate channel mapping, mute behavior, clocking, and level calibration as part of the receiver design because transport standards and equipment implementations can impose additional requirements.

🎧

Active Speaker and Compact Audio Products

The AK4426VT can serve as the stereo DAC in an active speaker, compact amplifier, or powered audio product with digital input. Its 16-pin TSSOP package supports space-constrained construction, and the integrated 2 Vrms output buffer can feed a downstream power amplifier when voltage gain and impedance match are suitable. Compared with a discrete converter and output-buffer arrangement, the integrated device can simplify the analog path. Check the amplifier’s input range carefully, provide the correct output coupling network, and keep the DAC and charge-pump return currents out of the sensitive amplifier-reference path.

🎚️

Professional Audio Monitoring DAC

The AK4426VT is applicable to stereo monitoring paths in professional audio equipment that require high-resolution conversion and direct analog drive. The 24-bit interface, 192 kHz capability, and 2 Vrms output support a conventional monitoring architecture, while the multi-bit modulator is intended to maintain linearity and distortion performance. The integrated buffer is useful where a full-power discrete output stage would add cost and complexity. Evaluation should include channel balance, output-noise measurement, grounding, and downstream amplifier headroom to confirm that the selected digital source and analog path meet the intended monitoring specification.

What is the AK4426VT?
The AK4426VT is a 24-bit stereo audio DAC with a maximum sampling rate of 192 kHz, an integrated 2 Vrms output buffer, and I2C and SPI control. According to the manufacturer datasheet, it uses a 5 V supply and a multi-bit modulator architecture. The device is packaged in a 16-pin TSSOP with a 0.65 mm lead pitch, making it suitable for compact digital audio equipment requiring an integrated ground-referenced output stage.
What are the key specifications of AK4426VT that engineers should know?
The AK4426VT combines 24-bit resolution, operation up to 192 kHz, a 5 V supply, and an integrated 2 Vrms output buffer in a 16-pin TSSOP. The manufacturer datasheet also identifies I2C and SPI interfaces, an integrated charge pump for the negative output rail, and a multi-bit modulator architecture. These features place it between a digital audio source and an analog power or line-output stage.
What is the operating voltage of AK4426VT?
The AK4426VT uses a nominal 5 V supply, and the manufacturer datasheet specifies a 4.5 V to 5.5 V range for the power-supply pin. This operating range should be maintained across temperature and load conditions. The charge pump generates the internal negative rail required by the integrated output buffer, so the external supply design must provide stable 5 V power without exceeding the stated maximum.
Does AK4426VT support 192 kHz audio?
Yes, the AK4426VT supports a maximum sampling rate of 192 kHz with 24-bit resolution. The manufacturer datasheet identifies the part as a 24-bit stereo DAC rated for 192 kHz operation. Achieving that rate in an end product also requires a compatible host controller, digital audio source, clock arrangement, and signal path; the DAC rating alone does not establish the complete system performance.
What digital interfaces does AK4426VT use?
The AK4426VT provides I2C and SPI interfaces for configuration and control. The DigiKey product listing identifies both interfaces for this exact 16-TSSOP device. Interface selection depends on the surrounding digital audio controller, clock architecture, and system firmware, so use the manufacturer pin description and serial-interface sections when finalizing connections and register programming.
Where can I find the AK4426VT pinout?
The AK4426VT pinout is published in the manufacturer datasheet, while the 16-pin TSSOP and 0.65 mm pitch package information appears in the product documentation. Use the package drawing and pin-description table together because the charge pump, analog supply, digital interface, clock, and channel signals must be assigned to the correct terminals. The complete pin table is not reproduced on this page.
Where to download the AK4426VT datasheet PDF?
The AK4426VT datasheet PDF is available from the manufacturer document linked on this page. It defines the electrical characteristics, digital and analog interfaces, pin assignments, charge-pump behavior, output-buffer architecture, and application information. Use that document to verify absolute maximum ratings, recommended operating conditions, timing, and decoupling requirements before finalizing a board design.
Where to buy AK4426VT online?
Use the Request a Quote form on this page to request AK4426VT pricing, stock confirmation, and order handling from XAIPART. The form is the appropriate route for checking exact suffix, package, quantity, and delivery requirements. The AK4426VT designation includes a specific 16-pin TSSOP package, so confirm that the quoted line item matches the required package rather than accepting a generic AK4426 family description.
What is the price of AK4426VT?
Current AK4426VT pricing is obtained through the Request a Quote form on this page. The form supports an exact request for the AK4426VT suffix, required quantity, and shipment destination so the response can reflect the actual order configuration. This avoids presenting a potentially stale or mismatched price for a different package, quantity break, or AK4426-family variant.
What is the lead time and stock status for AK4426VT?
Current stock and lead-time confirmation for AK4426VT should be requested through the Request a Quote form on this page. A definitive allocation depends on the exact manufacturer part number, requested quantity, packaging, and current channel inventory. Engineers should also plan the audio-clock, analog-output, and PCB qualification schedule so a sourcing delay does not become the critical path.
Is AK4426VT in stock?
AK4426VT stock status should be confirmed for the requested quantity through the Request a Quote form on this page. The form routes the inquiry for the exact AK4426VT order code and lets XAIPART confirm current availability. For production planning, specify the annual demand, forecast cadence, packaging preference, and acceptable delivery window rather than relying on an unqualified inventory statement.
What is the best drop-in replacement for AK4426VT?
No verified drop-in replacement for the AK4426VT is established by the manufacturer or cross-reference information reviewed for this page. A valid replacement must match the 16-pin TSSOP footprint, pin functions, supply arrangement, control protocol, clocking, and 24-bit/192 kHz performance. Similar AK4426 family members should not be assumed to be pin-compatible, so request an engineering comparison and confirm the exact datasheet before substitution.
Can another manufacturer provide an AK4426VT equivalent?
No cross-brand AK4426VT equivalent is confirmed as a pin-to-pin drop-in replacement by the reviewed cross-reference results. Stereo DAC alternatives must be checked for package, analog output amplitude, digital audio format, clocking, control interface, and output-buffer topology because functional similarity alone does not ensure PCB compatibility. Use the Request a Quote form for a custom sourcing review rather than approving an unverified substitute.
When should I choose the AK4426VT for a digital audio design?
Choose the AK4426VT when the design needs a compact 24-bit stereo DAC supporting up to 192 kHz and a direct 2 Vrms output from an integrated buffer. Its I2C and SPI control options, 5 V supply, and 16-pin TSSOP package fit compact digital audio products. It is less suitable when a different package, differential-only output, or different control protocol is mandatory.
How does the AK4426VT charge pump affect output design?
The AK4426VT charge pump develops an internal negative supply rail that lets its output buffer produce a ground-referenced 2 Vrms signal. This reduces the external analog buffer requirement for a conventional single-ended output path. The negative rail is internal, so the board still needs correct analog grounding, decoupling, output routing, and protection; consult the manufacturer application guidance before adding coupling capacitors or downstream amplification.

工程參考資料,適用於 AK4426VT — 比較、設計指引及合規資訊。

選型指南

Choose the AK4426VT when a product requires a compact stereo DAC with 24-bit resolution, operation up to 192 kHz, I2C or SPI control, and an integrated 2 Vrms output buffer. Its 5 V supply and 16-pin TSSOP package are particularly convenient for compact consumer, broadcast, computer-audio, and active-speaker products. The integrated charge pump supports ground-referenced output and can simplify the external analog path. Before selecting it, verify digital audio format, clocking, mute requirements, output impedance, and downstream amplifier compatibility. No verified pin-compatible replacement is established for this exact device, so do not substitute an AK4426-family part solely by matching resolution and sample rate. When the AK4426VT is selected, the engineering effort should concentrate on clean supply routing, controlled digital return current, correct output coupling, and end-to-end distortion and noise testing.

設計說明

Separate the digital audio return current from the analog output and charge-pump current paths. Place the device-side decoupling according to the manufacturer application diagram, use a continuous ground reference beneath the converter where the package and board construction permit, and route analog outputs away from clock, serial-data, and switching-node traces. These steps reduce the chance that digital return current will modulate the 2 Vrms output and degrade measured channel noise or distortion.

Design the 5 V analog supply to remain within the 4.5 V to 5.5 V power-supply range under startup, load, and temperature conditions. Because the integrated charge pump supports the negative rail required by the output buffer, power-quality disturbances can appear at the analog output. Use local high-frequency bypassing, maintain a low-impedance return, and isolate the converter from noisy digital and power-conversion nodes according to the manufacturer layout guidance.

Do not treat another member of the AK4426 family as a drop-in substitute solely because its resolution and sampling rate appear similar. The replacement must preserve the 16-pin TSSOP footprint, pin functions, supply arrangement, clock requirements, digital format, and control protocol. Confirm every connection against the exact candidate datasheet and review output amplitude, mute behavior, and channel mapping before approving a substitution.

Treat the digital clock and audio interface as potentially critical timing signals. Keep traces short, provide a continuous reference plane, avoid unnecessary stubs, and use source-end termination when the clock topology requires it. The converter’s maximum 192 kHz rate does not remove the need for careful clock routing, because edge quality and return-path discontinuities can influence data recovery and analog conversion performance.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The reviewed product documentation does not state the requested compliance statuses. The AEC-Q100 field is shown as unknown because this is a consumer-market audio converter and no automotive qualification statement was identified.

資料驗證日期: 2026-11-11 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AK4426VT datasheet AK4426VT pinout AK4426VT datasheet pdf AK4426VT equivalent AK4426VT replacement AK4426VT cross reference AK4426VT footprint AK4426VT schematic AK4426VT application circuit AK4426VT 2Vrms output AK4426VT 16-TSSOP pinout AK4426VT price AK4426VT stock Asahi Kasei Microdevices AK4426VT

相關元件與詞彙

Asahi Kasei Microdevices AK4426VT stereo DAC digital-to-analog converter audio converter IC integrated circuit semiconductor 24-bit DAC 192 kHz sampling rate I2C SPI 2 Vrms output integrated output buffer charge pump multi-bit modulator 5 V analog supply negative power rail 16-pin TSSOP TSSOP package family surface-mount package digital audio ground-referenced output THD+N dynamic range
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情