AT91SAM7S64-MU - 55MHz ARM7 64-QFN Microcontroller
MPN: AT91SAM7S64-MU ✓ AktifAT91SAM7S64-MU Ringkasan
A flash microcontroller is a microcontroller that stores its program code in nonvolatile internal flash rather than requiring an external memory device for every boot. The AT91SAM7S64 belongs to the SAM7S family, which combines the ARM7TDMI architecture with low-pin-count integration and cost-sensitive embedded control. Its position in the product hierarchy is ARM7 RISC processor, flash microcontroller, 32-bit microcontroller, integrated circuit, and semiconductor.
Key characteristics include operation at a maximum 55 MHz, 64 KB of internal high-speed flash organized in pages, and 16 KB of SRAM for firmware working memory. The integrated USB device port supports connectivity to a personal computer or other USB host. Embedded ICE and Debug Communication Channel support assist in-circuit debugging, while the peripheral set supports control-oriented embedded-system designs.
The ARM7TDMI core supports the 32-bit ARM instruction set and Thumb code, providing efficient execution within the constraints of a low-cost embedded design. Internal flash retains the firmware without external nonvolatile storage, and SRAM supports runtime data, stack, and buffer management. The 64-QFN package limits lead count compared with larger leaded packages, but its exposed thermal pad requires deliberate PCB layout for reliable heat transfer.
Typical applications include USB-connected consumer peripherals, industrial automation controllers, data-acquisition equipment, and compact embedded-control products. The USB device interface is especially useful when a system needs a standard peripheral connection without adding a separate USB controller. The 55 MHz processor also supports responsive control loops and moderate protocol-processing workloads.
For a new PCB, route the exposed pad to a ground or thermal structure according to the manufacturer datasheet and place decoupling capacitors close to the supply pins. For an existing board, verify the 64-QFN land pattern, pin functions, oscillator configuration, programming interface, and boot-strapping requirements before substitution. A same-footprint designation alone does not establish firmware or peripheral compatibility.
This product overview combines the device architecture, package characteristics, interface capabilities, application guidance, and drop-in replacement constraints into one engineering-oriented reference. It also distinguishes documented electrical characteristics from parameters that still require confirmation from the manufacturer datasheet or an approved component-change review.
Pilihan pengganti yang segera untuk AT91SAM7S64-MU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AT91SAM7S64-MU (sama faktor bentuk dan kaki) — berbeza dalam Flash Organization, Internal Flash Memory, Internal SRAM, Package, Processor Core.
AT91SAM7S64B-MU-999
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AT91SAM7S64-AU-999
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
AT91SAM7S64-MU Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM RISC flash microcontroller |
| Processor Core | ARM7TDMI |
| Maximum CPU Frequency | 55 MHz |
| Instruction Set | 32-bit ARM with 16-bit Thumb instruction set |
| Internal Flash Memory | 64 KB |
| Flash Organization | 512 pages |
| Internal SRAM | 16 KB |
| USB Interface | Integrated USB device port |
| Debug Support | Embedded ICE and Debug Communication Channel |
| Kemasan | 64-QFN (9 x 9 mm) |
| Jenis Pemasangan | Surface mount |
| Suhu Operasi | -40 °C to 85 °C |
Panduan Konfigurasi Pin AT91SAM7S64-MU 64-qfn (9 x 9 mm)
Konfigurasi pin untuk AT91SAM7S64-MU (64-qfn (9 x 9 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk AT91SAM7S64-MU.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AT91SAM7S64-MU patut untuk 6 aplikasis: USB-connected control peripheral, Industrial automation controller, Data-acquisition controller, Consumer peripheral, Communication interface card, Embedded system debug platform.
USB-connected control peripheral
AT91SAM7S64-MU fits a USB peripheral because it combines an integrated USB device port with a 55 MHz ARM7TDMI processor and 64 KB of internal flash. The microcontroller can maintain device enumeration and control functions without a separate USB interface IC, reducing board complexity in compact peripherals. Its 16 KB of SRAM provides working space for control state, buffers, and the stack. The device-port role must be designed for the target host environment, including cable protection, power sourcing, enumeration timing, and the electrical requirements of the USB interface. Firmware should be validated against the relevant USB class and operating-system requirements.
Disebarkan
Industrial automation controller
AT91SAM7S64-MU is appropriate for compact industrial automation modules that require deterministic embedded control, local nonvolatile program storage, and USB service connectivity. Its 55 MHz ARM7TDMI core provides more processing headroom than an 8-bit controller, while 64 KB of internal flash supports protocol handling, control logic, and field-update capability. The -40 °C to 85 °C temperature rating fits industrial-temperature equipment. Deployment still requires checking the exact supply range, oscillator tolerances, I/O limits, ESD protection, isolation boundaries, and environmental qualification against the finished machine.
Disebarkan
Data-acquisition controller
AT91SAM7S64-MU can serve as the supervisory controller in a compact data-acquisition system by combining a 55 MHz 32-bit processor, 16 KB SRAM, and internal flash in a low-pin-count package. It is suitable for coordinating sensor sampling, buffering results, applying configuration commands, and transferring data over USB. The integrated USB device port simplifies connection to a host computer. ADC resolution, conversion speed, input count, and electrical limits must be confirmed in the manufacturer datasheet because those details are required to determine whether an external converter or front end is necessary.
Disebarkan
Consumer peripheral
AT91SAM7S64-MU is well suited to cost-sensitive consumer accessories that use USB as a peripheral interface and require more control capability than a basic 8-bit MCU. Internal 64 KB flash removes the need for a separate program-memory device in many designs, while the 64-QFN package supports compact surface-mount construction. The 55 MHz core can manage configuration, user-interface states, logging, and protocol tasks. A production design should validate USB electrical compliance, power consumption, update security, connector lifecycle, and the operating-temperature needs of its target enclosure.
Disebarkan
Communication interface card
AT91SAM7S64-MU can be used in a communication interface card where a host computer connects through the integrated USB device port while the microcontroller handles framing, configuration, status reporting, and local control. Its ARM7TDMI core operates at up to 55 MHz, providing adequate capacity for protocol stacks and service interfaces, while 64 KB of internal flash supports application firmware and a bootloader. Interface-card design must account for USB signal integrity, ground-return paths, ESD protection, isolation requirements, and protocol-specific timing or security requirements.
Disebarkan
Embedded system debug platform
AT91SAM7S64-MU supports embedded debug development through its ARM7TDMI core, Embedded ICE capability, and Debug Communication Channel. This makes the device suitable for a low-cost controller platform where engineers need deterministic execution, breakpoint inspection, and memory visibility during firmware development. The 55 MHz core and 16 KB SRAM permit realistic application logic to run in the target system instead of relying entirely on host simulation. The chosen debugger, adapter, connector, and programming software must support the device, and production access to the debug interface should be reviewed for security.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AT91SAM7S64-MU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | AT91SAM7S64B-MU-999 | AT91SAM7S64-AU-999 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Processor Core | ARM7TDMI | ARM7TDMI family | ARM7TDMI family |
| Maximum CPU Frequency | 55 MHz | 55 MHz | 55 MHz |
| Internal Flash Memory | 64 KB | 64 KB | 64 KB |
| Internal SRAM | 16 KB | 16 KB | 16 KB |
| USB Interface | Integrated USB device port | Integrated USB device port | Integrated USB device port |
| Programming and Debug | Embedded ICE and Debug Communication Channel | Embedded ICE and Debug Communication Channel | Embedded ICE and Debug Communication Channel |
| Ordering Suffix | -MU | -B-MU-999 | -AU-999 |
Penyeberangsung Jelas
- Integrated USB device connectivity (vsAT91SAM7S64B-MU-999)
- Compact 64-QFN integration (vsAT91SAM7S64-AU-999)
- Single-chip program storage and control (vsAT91SAM7S64B-MU-999)
Catatan Desain
Implement the 64-QFN land pattern exactly as shown in the manufacturer package drawing, including the exposed thermal pad and its connection requirement. Place input and bulk-decoupling capacitors adjacent to the relevant supply pins to minimize high-frequency loop area. Because the package has a high pin count in a 9 x 9 mm area, use a qualified PCB assembler capable of fine-pitch QFN soldering and inspect the exposed-pad solder fill using an appropriate acceptance method.
Route the exposed pad through a thermal-via array into a grounded copper plane or other heat-spreading structure, while following the manufacturer recommendations for via size, spacing, and keepouts. Temperature rise depends on the exact processor load, supply voltage, ambient temperature, and board construction, so calculate the worst-case junction condition rather than relying on the package size alone. Maintain unobstructed airflow where the final enclosure limits convection.
Do not treat AT91SAM7S64C-AU as a drop-in replacement merely because it belongs to the same device family. Its comparison material indicates that functional differences can require circuit changes. Likewise, confirm that AT91SAM7S64B-MU-999 or AT91SAM7S64-AU-999 retains compatible pin functions, clock limits, startup behavior, memory organization, peripheral availability, and packaging. Revalidate firmware and the production programming procedure after any ordering-code change.
For USB operation, provide a continuous ground reference, short impedance-controlled USB traces, appropriate series damping, and ESD protection located near the connector. Avoid routing USB signals over noisy switching nodes or split ground planes. Verify rise-time, fall-time, envelope, and susceptibility requirements with the actual board layout because the 55 MHz CPU clock and external peripheral activity can couple into sensitive USB traces.
Maklumat Kesediaan
The industrial-temperature range is identified, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is present. AEC-Q100 is not applicable to this non-automotive general-purpose microcontroller ordering code.