Microchip Technology

AT91SAM7S64-MU - 55MHz ARM7 64-QFN Microcontroller

MPN: AT91SAM7S64-MU ✓ פעיל
64-QFN (9 x 9 mm) Package 55 MHz Speed 64 KB Memory
כמות הזמנה מינימלית: 1 |

AT91SAM7S64-MU סקירה

The Microchip AT91SAM7S64-MU is a 55 MHz, 32-bit ARM7TDMI flash microcontroller with 64 KB of internal flash memory, 16 KB of SRAM, and a 64-QFN 9 x 9 mm package. It combines a high-performance ARM7 RISC core with integrated USB device connectivity, debug support, and a broad set of embedded peripherals for compact control systems.

A flash microcontroller is a microcontroller that stores its program code in nonvolatile internal flash rather than requiring an external memory device for every boot. The AT91SAM7S64 belongs to the SAM7S family, which combines the ARM7TDMI architecture with low-pin-count integration and cost-sensitive embedded control. Its position in the product hierarchy is ARM7 RISC processor, flash microcontroller, 32-bit microcontroller, integrated circuit, and semiconductor.

Key characteristics include operation at a maximum 55 MHz, 64 KB of internal high-speed flash organized in pages, and 16 KB of SRAM for firmware working memory. The integrated USB device port supports connectivity to a personal computer or other USB host. Embedded ICE and Debug Communication Channel support assist in-circuit debugging, while the peripheral set supports control-oriented embedded-system designs.

The ARM7TDMI core supports the 32-bit ARM instruction set and Thumb code, providing efficient execution within the constraints of a low-cost embedded design. Internal flash retains the firmware without external nonvolatile storage, and SRAM supports runtime data, stack, and buffer management. The 64-QFN package limits lead count compared with larger leaded packages, but its exposed thermal pad requires deliberate PCB layout for reliable heat transfer.

Typical applications include USB-connected consumer peripherals, industrial automation controllers, data-acquisition equipment, and compact embedded-control products. The USB device interface is especially useful when a system needs a standard peripheral connection without adding a separate USB controller. The 55 MHz processor also supports responsive control loops and moderate protocol-processing workloads.

For a new PCB, route the exposed pad to a ground or thermal structure according to the manufacturer datasheet and place decoupling capacitors close to the supply pins. For an existing board, verify the 64-QFN land pattern, pin functions, oscillator configuration, programming interface, and boot-strapping requirements before substitution. A same-footprint designation alone does not establish firmware or peripheral compatibility.

This product overview combines the device architecture, package characteristics, interface capabilities, application guidance, and drop-in replacement constraints into one engineering-oriented reference. It also distinguishes documented electrical characteristics from parameters that still require confirmation from the manufacturer datasheet or an approved component-change review.

חלופות תחליף ישיר עבור AT91SAM7S64-MU — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AT91SAM7S64-MU (אותו גורם צורה וטביעת רגל) — שונים ב Flash Organization, Internal Flash Memory, Internal SRAM, Package, Processor Core.

Microchip Technology
Flash Organization: 32 KB (32K x 8)
Internal Flash Memory: 32 KB
Internal SRAM: 8 KB
השווה עם AT91SAM7S64-MU →

AT91SAM7S64B-MU-999

✅ Drop-In
📦 64-QFN (9 x 9 mm)
Same MU package suffix and 64-QFN footprint; the B silicon revision requires datasheet and change-control review, with no quantified electrical difference confirmed in the available material.

📋 חלופה להתייחסות (לא בקטלוג)

AT91SAM7S64-AU-999

✅ Drop-In
📦 64-QFN (9 x 9 mm)
Same 64-QFN device family and ordering form; the AU suffix differs from the target MU suffix, with no quantified voltage, frequency, or memory difference confirmed in the available material.

📋 חלופה להתייחסות (לא בקטלוג)

AT91SAM7S64-MU דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM RISC flash microcontroller
Processor Core ARM7TDMI
Maximum CPU Frequency 55 MHz
Instruction Set 32-bit ARM with 16-bit Thumb instruction set
Internal Flash Memory 64 KB
Flash Organization 512 pages
Internal SRAM 16 KB
USB Interface Integrated USB device port
Debug Support Embedded ICE and Debug Communication Channel
מארז 64-QFN (9 x 9 mm)
סוג הרכבה Surface mount
טמפרטורת פעולה -40 °C to 85 °C

מדריך תצורת פינים של AT91SAM7S64-MU 64-qfn (9 x 9 mm)

תצורת פינים עבור AT91SAM7S64-MU (מארזת 64-qfn (9 x 9 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-qfn (9 x 9 mm) עבור AT91SAM7S64-MU

אין נתוני פריסת פינים מפורטים עבור AT91SAM7S64-MU.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AT91SAM7S64-MU מתאים עבור 6 יישוםs: USB-connected control peripheral, Industrial automation controller, Data-acquisition controller, Consumer peripheral, Communication interface card, Embedded system debug platform.

🔌

USB-connected control peripheral

AT91SAM7S64-MU fits a USB peripheral because it combines an integrated USB device port with a 55 MHz ARM7TDMI processor and 64 KB of internal flash. The microcontroller can maintain device enumeration and control functions without a separate USB interface IC, reducing board complexity in compact peripherals. Its 16 KB of SRAM provides working space for control state, buffers, and the stack. The device-port role must be designed for the target host environment, including cable protection, power sourcing, enumeration timing, and the electrical requirements of the USB interface. Firmware should be validated against the relevant USB class and operating-system requirements.

🏭

Industrial automation controller

AT91SAM7S64-MU is appropriate for compact industrial automation modules that require deterministic embedded control, local nonvolatile program storage, and USB service connectivity. Its 55 MHz ARM7TDMI core provides more processing headroom than an 8-bit controller, while 64 KB of internal flash supports protocol handling, control logic, and field-update capability. The -40 °C to 85 °C temperature rating fits industrial-temperature equipment. Deployment still requires checking the exact supply range, oscillator tolerances, I/O limits, ESD protection, isolation boundaries, and environmental qualification against the finished machine.

📊

Data-acquisition controller

AT91SAM7S64-MU can serve as the supervisory controller in a compact data-acquisition system by combining a 55 MHz 32-bit processor, 16 KB SRAM, and internal flash in a low-pin-count package. It is suitable for coordinating sensor sampling, buffering results, applying configuration commands, and transferring data over USB. The integrated USB device port simplifies connection to a host computer. ADC resolution, conversion speed, input count, and electrical limits must be confirmed in the manufacturer datasheet because those details are required to determine whether an external converter or front end is necessary.

📱

Consumer peripheral

AT91SAM7S64-MU is well suited to cost-sensitive consumer accessories that use USB as a peripheral interface and require more control capability than a basic 8-bit MCU. Internal 64 KB flash removes the need for a separate program-memory device in many designs, while the 64-QFN package supports compact surface-mount construction. The 55 MHz core can manage configuration, user-interface states, logging, and protocol tasks. A production design should validate USB electrical compliance, power consumption, update security, connector lifecycle, and the operating-temperature needs of its target enclosure.

🌐

Communication interface card

AT91SAM7S64-MU can be used in a communication interface card where a host computer connects through the integrated USB device port while the microcontroller handles framing, configuration, status reporting, and local control. Its ARM7TDMI core operates at up to 55 MHz, providing adequate capacity for protocol stacks and service interfaces, while 64 KB of internal flash supports application firmware and a bootloader. Interface-card design must account for USB signal integrity, ground-return paths, ESD protection, isolation requirements, and protocol-specific timing or security requirements.

🛠️

Embedded system debug platform

AT91SAM7S64-MU supports embedded debug development through its ARM7TDMI core, Embedded ICE capability, and Debug Communication Channel. This makes the device suitable for a low-cost controller platform where engineers need deterministic execution, breakpoint inspection, and memory visibility during firmware development. The 55 MHz core and 16 KB SRAM permit realistic application logic to run in the target system instead of relying entirely on host simulation. The chosen debugger, adapter, connector, and programming software must support the device, and production access to the debug interface should be reviewed for security.

What are the key specifications of AT91SAM7S64-MU that engineers should know?
The AT91SAM7S64-MU combines a 55 MHz ARM7TDMI core, 64 KB of internal flash, 16 KB of SRAM, and an integrated USB device port in a 64-QFN 9 x 9 mm package. According to the manufacturer datasheet, the part belongs to the 32-bit ARM7 RISC microcontroller family and supports embedded ICE with Debug Communication Channel access. Its -40 °C to 85 °C operating-temperature range supports industrial-temperature designs, although power-supply limits and detailed peripheral ratings must be checked in the datasheet.
Where can I download the AT91SAM7S64 datasheet PDF?
The AT91SAM7S64 datasheet PDF is available from the Keil documentation mirror listed on this page, while the Microchip product page provides the official device overview. According to the manufacturer documentation, the SAM7S64 uses an ARM7TDMI processor, reaches 55 MHz, and includes USB device connectivity. Use the pin-description and electrical-characteristics tables for design verification, and consult the package drawing to confirm the 64-QFN 9 x 9 mm land pattern.
Where can I find the AT91SAM7S64 pinout?
The AT91SAM7S64 pinout is defined by the 64-pin QFN pin-description table in the manufacturer datasheet. The package is a 64-QFN measuring 9 x 9 mm, and its exposed thermal pad must also be implemented according to the package drawing. Use the datasheet numbering diagram when assigning power, ground, reset, clock, debug, and peripheral signals; connector pinouts and schematic symbols must not be used as a substitute for the package-specific drawing.
How is the AT91SAM7S64 programmed?
The AT91SAM7S64 is programmed through its ARM-compatible embedded-debug and programming interface rather than through a separately specified bootloader. According to the manufacturer datasheet, the device includes Embedded ICE and Debug Communication Channel support for development and field diagnostics. The exact programming adapter, connector, voltage levels, and erase-and-program procedure must be confirmed with the debugger configuration and programming documentation before production use.
What is AT91SAM7S64-MU used for?
AT91SAM7S64-MU is used for cost-sensitive embedded-control products requiring a 32-bit ARM processor, internal flash, and USB device connectivity. Its 55 MHz ARM7TDMI core and 16 KB SRAM suit industrial controllers, data-acquisition equipment, USB peripherals, and compact consumer devices. The integrated USB device port is particularly useful for systems that need to enumerate as a peripheral rather than operate as a USB host.
Is AT91SAM7S64-MU suitable for industrial applications?
AT91SAM7S64-MU is suitable for many industrial applications because its specified operating-temperature range is -40 °C to 85 °C and it uses an industrial-temperature ordering designation. The manufacturer product information identifies industrial automation and general-purpose embedded systems as suitable applications. Final qualification also requires checking the exact supply voltage, transient limits, EMC requirements, and any customer-specific quality criteria.
What can replace AT91SAM7S64-MU?
The closest replacement should preserve the 64-QFN 9 x 9 mm footprint, pin assignments, boot behavior, clock architecture, peripheral mix, and firmware dependencies. AT91SAM7S64B-MU-999 is a same-package family alternative identified in the cross-reference results, while AT91SAM7S64-AU-999 is another related ordering variant. Both require qualification against the complete datasheet and production firmware before being treated as drop-in replacements.
Is AT91SAM7S64-MU the same as AT91SAM7S64C-AU?
No direct equivalence should be assumed. AT91SAM7S64C-AU is identified in comparison material as functionally related but functionally different from AT91SAM7S64-MU, and its circuit may require modification. Package suffix changes can indicate different temperature, packing, or silicon revisions. Confirm pin-by-pin electrical compatibility, reset behavior, clock limits, peripheral availability, and package dimensions before considering a replacement.
When should I choose AT91SAM7S64-MU over AT91SAM7S64B-MU-999?
Choose AT91SAM7S64-MU when the established ordering code, qualification history, and firmware baseline are already approved. Consider AT91SAM7S64B-MU-999 only after confirming that its silicon revision remains compatible with the existing design and supply plan. The B suffix may indicate a later device revision, but revision differences must be evaluated through manufacturer change documentation rather than inferred from the part-number suffix alone.
What is the best Microchip equivalent for AT91SAM7S64-MU?
The best Microchip-family equivalent is the closest ordering variant that retains the exact 64-QFN footprint and electrical behavior. The cross-reference results identify AT91SAM7S64B-MU-999 and AT91SAM7S64-AU-999 as related devices, but neither should be released as a production substitute until its package, memory, clock, peripheral, and lifecycle details are compared with AT91SAM7S64-MU. Request a current component-change review for an approved alternative.
Where to buy AT91SAM7S64-MU online?
Use the Request a Quote form on this page to request current AT91SAM7S64-MU availability, minimum order quantity, and delivery options. The product is identified by the complete 64-QFN ordering code, so request that exact suffix when obtaining a quotation. A valid sourcing request should also specify the required quantity, production schedule, inspection level, and whether reels or another approved packing format are needed.
What is the price of AT91SAM7S64-MU?
AT91SAM7S64-MU pricing depends on quantity, sourcing channel, and current market conditions, so use the Request a Quote form on this page for a current quotation. State the exact 64-QFN ordering code, annual and prototype quantities, target delivery date, and required packing format. This ensures the quotation matches the device variant and commercial conditions rather than a related SAM7S family member.
What is the lead time for AT91SAM7S64-MU?
The current lead time for AT91SAM7S64-MU should be confirmed through the Request a Quote form on this page. Include the required order quantity, production schedule, packing format, and whether the demand includes periodic resupply. Availability can change across the product life cycle, so a quotation and written availability confirmation provide a more reliable planning basis than a generic stock statement.
Is AT91SAM7S64-MU in stock?
Current AT91SAM7S64-MU stock should be confirmed through the Request a Quote form on this page. Submit the exact 64-QFN ordering code and required quantity so the response reflects the appropriate package variant and fulfillment conditions. For production planning, also request the manufacturer lead time, lot traceability requirements, date code policy, and any quality-document availability.
What is the difference between the ARM7 and ARM7TDMI architecture used in AT91SAM7S64?
AT91SAM7S64 uses the ARM7TDMI processor core, combining the ARM7 32-bit RISC architecture with the Thumb 16-bit instruction set and embedded debug support. According to the manufacturer documentation, the core supports high-density code execution at up to 55 MHz while retaining a simple general-purpose peripheral architecture. Software written for this part must also follow the interrupt, memory, peripheral, and debug behavior defined for the complete SAM7S64 device.

נתוני עזר הנדסיים עבור AT91SAM7S64-MU — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose AT91SAM7S64-MU for new or existing designs that specifically use the established 64-QFN 9 x 9 mm SAM7S64 footprint, 55 MHz ARM7TDMI performance, 64 KB internal flash, 16 KB SRAM, and integrated USB device function. It is particularly appropriate for USB peripherals, industrial modules, data-acquisition controllers, and embedded control products that can operate across -40 °C to 85 °C. Consider AT91SAM7S64B-MU-999 when a later same-package silicon revision offers sourcing or lifecycle benefits, but validate its revision-specific changes and run a complete firmware regression. Consider AT91SAM7S64-AU-999 only after confirming its package, temperature, and ordering characteristics. AT91SAM7S64C-AU should not be treated as a direct replacement because functional differences may require circuit modifications. No cross-brand part is recommended without an independent pin, electrical, firmware, and qualification review.

השוואה עם חלופות

פרמטר מוצר זה AT91SAM7S64B-MU-999 AT91SAM7S64-AU-999
Brand Microchip Technology Microchip Technology Microchip Technology
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm)
Processor Core ARM7TDMI ARM7TDMI family ARM7TDMI family
Maximum CPU Frequency 55 MHz 55 MHz 55 MHz
Internal Flash Memory 64 KB 64 KB 64 KB
Internal SRAM 16 KB 16 KB 16 KB
USB Interface Integrated USB device port Integrated USB device port Integrated USB device port
Programming and Debug Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel Embedded ICE and Debug Communication Channel
Ordering Suffix -MU -B-MU-999 -AU-999

מבדילים עיקריים

  • Integrated USB device connectivity (לעומתAT91SAM7S64B-MU-999)
  • Compact 64-QFN integration (לעומתAT91SAM7S64-AU-999)
  • Single-chip program storage and control (לעומתAT91SAM7S64B-MU-999)

הערות תכנון

Implement the 64-QFN land pattern exactly as shown in the manufacturer package drawing, including the exposed thermal pad and its connection requirement. Place input and bulk-decoupling capacitors adjacent to the relevant supply pins to minimize high-frequency loop area. Because the package has a high pin count in a 9 x 9 mm area, use a qualified PCB assembler capable of fine-pitch QFN soldering and inspect the exposed-pad solder fill using an appropriate acceptance method.

Route the exposed pad through a thermal-via array into a grounded copper plane or other heat-spreading structure, while following the manufacturer recommendations for via size, spacing, and keepouts. Temperature rise depends on the exact processor load, supply voltage, ambient temperature, and board construction, so calculate the worst-case junction condition rather than relying on the package size alone. Maintain unobstructed airflow where the final enclosure limits convection.

Do not treat AT91SAM7S64C-AU as a drop-in replacement merely because it belongs to the same device family. Its comparison material indicates that functional differences can require circuit changes. Likewise, confirm that AT91SAM7S64B-MU-999 or AT91SAM7S64-AU-999 retains compatible pin functions, clock limits, startup behavior, memory organization, peripheral availability, and packaging. Revalidate firmware and the production programming procedure after any ordering-code change.

For USB operation, provide a continuous ground reference, short impedance-controlled USB traces, appropriate series damping, and ESD protection located near the connector. Avoid routing USB signals over noisy switching nodes or split ground planes. Verify rise-time, fall-time, envelope, and susceptibility requirements with the actual board layout because the 55 MHz CPU clock and external peripheral activity can couple into sensitive USB traces.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The industrial-temperature range is identified, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is present. AEC-Q100 is not applicable to this non-automotive general-purpose microcontroller ordering code.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

at91sam7s64 data sheet at91sam7s64 datasheet at91sam7s64 pinout at91sam7s64 programming atmel at91sam7s64 AT91SAM7S64-MU datasheet AT91SAM7S64-MU pinout AT91SAM7S64-MU equivalent AT91SAM7S64-MU replacement AT91SAM7S64-MU footprint AT91SAM7S64-MU price AT91SAM7S64-MU stock AT91SAM7S64-MU vs AT91SAM7S64B-MU-999 Microchip AT91SAM7S64-MU AT91SAM7S64 application circuit

רכיבים ומונחים קשורים

Microchip Technology AT91SAM7S64-MU AT91SAM7S64 AT91SAM7S64B-MU-999 AT91SAM7S64-AU-999 AT91SAM7S64C-AU ARM7TDMI ARM7 RISC processor Thumb instruction set 32-bit microcontroller flash microcontroller embedded RISC controller USB device port Embedded ICE Debug Communication Channel 64 KB internal flash 16 KB SRAM 55 MHz 64-QFN QFN package family surface-mount package industrial automation data acquisition USB peripheral RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר