Microchip Technology

ATSAM4SD16BB-AN 120MHz Cortex-M4 1MB Flash LQFP-64 | Microchip

MPN: ATSAM4SD16BB-AN ✓ Aktif
1.62 V to 3.6 V Vdss 64-LQFP (10 mm x 10 mm) Package 120 MHz Speed 1 MB (1M x 8) Memory
MOQ: 1 |

ATSAM4SD16BB-AN Ringkasan

The Microchip Technology ATSAM4SD16BB-AN is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 1 MB of Flash program memory and a 64-LQFP package measuring 10 mm by 10 mm. It is designed for embedded control applications requiring real-time processing, mixed-signal support, and a compact low-pin-count surface-mount footprint.

A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, peripherals, and input/output interfaces into one component. The ATSAM4SD16BB-AN belongs to the SAM4S family of Cortex-M4 devices, combining a 32-bit ARM processing core with embedded control peripherals for industrial, communications, instrumentation, and embedded-system products. Its 64-LQFP package provides a practical option for designs requiring more external signal access than smaller microcontroller packages.

The device provides a maximum operating frequency of 120 MHz and 1 MB of Flash memory organized as 1M x 8, as identified by the manufacturer and distributor product listings. The operating voltage range is 1.62 V to 3.6 V, making it suitable for low-voltage embedded systems. The ATSAM4SD16BB-AN is identified as an industrial-temperature, green, LQFP, Revision B ordering variant.

The SAM4S architecture integrates a high-performance 32-bit ARM Cortex-M4 core with embedded peripherals for communications, control, timing, and data acquisition. Revision B is the recommended device revision for new designs, prototypes, and production according to the Microchip product page. The wide operating-voltage range supports designs operating from regulated 3.3 V systems and lower-voltage power domains when the surrounding circuitry and firmware are designed accordingly.

Typical applications include industrial monitoring, factory automation, communications equipment, data acquisition systems, motor and equipment control, and embedded instrumentation. The 1 MB Flash capacity is useful for firmware, configuration tables, calibration data, and application logic, while the 64-pin package provides access to the device's peripheral and interface resources.

When laying out a board for the ATSAM4SD16BB-AN, preserve the LQFP-64 footprint, follow the manufacturer pin-assignment table, provide suitable decoupling at the supply pins, and route high-speed or sensitive signals with short return paths. The 120 MHz operating rate makes trace layout, grounding, and clock implementation important for reliable operation.

This product page consolidates the manufacturer device definition, package and memory details, sourcing information, drop-in alternatives, and practical integration guidance. Use the ATSAM4SD16BB-AN when a project requires a 120 MHz Cortex-M4 MCU with 1 MB Flash in a 64-LQFP industrial package.

Pilihan pengganti yang segera untuk ATSAM4SD16BB-AN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

ATSAM4SD16BB-ANR

✅ Masuk Drop-In
📦 64-LQFP (10 x 10 mm)
Same ATSAM4SD16BB device and electrical configuration; alternate shipment form changes the ordering suffix while retaining the 64-LQFP footprint, 120 MHz rating, and 1 MB Flash configuration.

📋 Alternatif rujukan (tidak dalam katalog)

ATSAM4SD16BB-AN Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M4 microcontroller
Maximum CPU Frequency 120 MHz
Flash Memory 1 MB (1M x 8)
Operating Voltage Range 1.62 V to 3.6 V
Kemasan 64-LQFP (10 mm x 10 mm)
Core ARM Cortex-M4
Architecture 32-bit RISC
Product Family SAM4S
Device Revision Revision B
Temperature Grade Industrial temperature
Jenis Pemasangan Surface mount
Bilangan Pin 64 pins
Lead-Free Status Green
Status RoHS Compliant
Datasheet Pinout Use the manufacturer pin-description table for the 64-LQFP footprint

Panduan Konfigurasi Pin ATSAM4SD16BB-AN 64-lqfp (10 mm x 10 mm)

Konfigurasi pin untuk ATSAM4SD16BB-AN (64-lqfp (10 mm x 10 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 64-lqfp (10 mm x 10 mm) untuk ATSAM4SD16BB-AN

Tiada data garisan pin yang diperoleh untuk ATSAM4SD16BB-AN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATSAM4SD16BB-AN patut untuk 6 aplikasis: Industrial Monitoring and Control, Data Acquisition Systems, Communications Equipment, Motor and Equipment Control, Instrumentation and Test Equipment, Embedded Products with Local Storage.

🏭

Industrial Monitoring and Control

The ATSAM4SD16BB-AN suits industrial monitoring systems that combine sensor acquisition, local logic, and communications in a 10 mm by 10 mm LQFP-64 footprint. Its 120 MHz Cortex-M4 core provides computational headroom for filtering, diagnostics, and control loops, while 1 MB of Flash stores application firmware, configuration, and calibration information. The 1.62 V to 3.6 V operating range supports low-voltage industrial electronics when paired with appropriately rated sensors and communication interfaces. Firmware should include watchdog recovery, brownout handling, and periodic integrity checks because unattended equipment must continue operating safely after transient disturbances.

📊

Data Acquisition Systems

The ATSAM4SD16BB-AN can serve as the central controller in a compact data-acquisition module that samples multiple analog channels, timestamps measurements, and transfers results to a host. The 120 MHz Cortex-M4 core can manage peripheral servicing and communication while 1 MB of Flash provides room for calibration tables and buffering logic. Its 64-LQFP package exposes more I/O than compact packages, helping separate communication, control, and analog-support signals. For designs requiring higher-resolution conversion, an external ADC such as the MCP3301T-BI/SN can complement the MCU while the controller performs system-level timing and data formatting.

🌐

Communications Equipment

The ATSAM4SD16BB-AN fits embedded communications equipment that requires deterministic control alongside serial data handling. Its Cortex-M4 processor runs at up to 120 MHz, providing enough performance for protocol management, framing, buffer control, and supervisory logic. The 1.62 V to 3.6 V supply range can simplify integration with modern low-voltage interface devices, while the 64-pin LQFP offers separate connections for serial interfaces, status indicators, reset, and control signals. Designers should budget peripheral functions carefully because an MCU replacement is valid only when its UART, SPI, I2C, timer, and interrupt mapping match the original board.

⚡

Motor and Equipment Control

The ATSAM4SD16BB-AN is suitable for equipment-control boards that coordinate sensors, actuators, interlocks, and operator communications. The 120 MHz Cortex-M4 core can execute control algorithms alongside interrupt-driven input handling, and the 1 MB Flash capacity is sufficient for larger application programs and configuration data. Its 64-LQFP footprint provides a practical balance between board area and pin availability, while the 1.62 V to 3.6 V range supports partitioned low-voltage rails. The implementation should include hardware shutdown paths and watchdog recovery so a firmware fault cannot leave powered machinery in an unsafe state.

🔧

Instrumentation and Test Equipment

The ATSAM4SD16BB-AN can act as the control processor in compact instrumentation requiring calibrated measurements, local adjustment, and a reliable user interface. Its high-performance Cortex-M4 core supports real-time sampling, filtering, and protocol processing, while 1 MB of Flash accommodates firmware, instrument tables, and test sequences. The LQFP-64 package supports a conventional PCB assembly process and exposes enough pins for control signals, communication, displays, and analog front-end support. In metrology-oriented designs, calibration data should be stored in protected memory and validated through the instrument startup routine before measurements are accepted.

🖥️

Embedded Products with Local Storage

The ATSAM4SD16BB-AN is appropriate for embedded products that need meaningful onboard program storage for application code, configuration, diagnostic logs, and calibration parameters. Its 1 MB 1M x 8 Flash organization gives software designers room beyond a minimal bootloader, while the 120 MHz Cortex-M4 core handles control and communication tasks. The 64-LQFP package is compatible with conventional reflow assembly and provides a generous pin count for sensors, local storage interfaces, and status controls. Firmware architecture should include version identification, rollback protection, and a field-update path that verifies image integrity before replacing the active application.

What is the ATSAM4SD16BB-AN?
The ATSAM4SD16BB-AN is a Microchip Technology 32-bit ARM Cortex-M4 microcontroller rated up to 120 MHz, with 1 MB of Flash memory in a 64-LQFP package. The ATSAM4S family combines a real-time embedded-processing core with programmable peripherals and external interfaces. According to the manufacturer product page, Revision B is recommended for new designs, prototypes, and production.
What are the key specifications of ATSAM4SD16BB-AN that engineers should know?
The ATSAM4SD16BB-AN combines a 120 MHz maximum CPU frequency, 1 MB of 1M x 8 Flash memory, a 1.62 V to 3.6 V operating range, and a 64-LQFP 10 mm x 10 mm package. Microchip identifies it as a green, industrial-temperature, Revision B SAM4S device. These specifications position it for low-voltage embedded systems requiring substantial program storage and a conventional 64-pin surface-mount footprint.
Where can I download the ATSAM4SD16BB-AN datasheet PDF?
The ATSAM4SD16BB-AN datasheet and technical overview are available through the Microchip ATSAM4SD16B product page and the linked datasheet repository. Use the manufacturer documentation for the authoritative pin description, electrical characteristics, memory map, peripheral details, and recommended application circuits. The product page specifically notes that Revision B should be considered for new designs, prototypes, and production.
Where can I find the ATSAM4SD16BB-AN pinout?
Use the 64-LQFP pin-description table in the Microchip ATSAM4SD16B documentation to assign signals to the ATSAM4SD16BB-AN footprint. The package is a 10 mm by 10 mm surface-mount LQFP with 64 terminals. Do not infer unused or peripheral pin assignments from a generic 64-pin symbol; verify each power, ground, debug, reset, clock, and I/O connection against the manufacturer pin table.
What is the supply voltage range of ATSAM4SD16BB-AN?
The ATSAM4SD16BB-AN operates from 1.62 V to 3.6 V, according to the product specifications listed for the Microchip Technology device. This range supports low-voltage embedded designs operating around regulated 3.3 V rails. The selected external components, decoupling network, and peripherals must also support the voltage range used at each power rail.
What can replace the ATSAM4SD16BB-AN?
The ATSAM4SD16BB-ANR is the closest same-family drop-in candidate because it retains the ATSAM4SD16BB 64-LQFP architecture and electrical configuration while changing the shipment form. Confirm the exact package dimensions, pin assignments, temperature grade, and ordering suffix against the manufacturer documentation before substitution. A functional equivalent should not be assumed to be a drop-in replacement unless its footprint and peripheral mapping are verified.
Is ATSAM4SD16BB-ANR pin-compatible with ATSAM4SD16BB-AN?
The ATSAM4SD16BB-ANR is presented as the same ATSAM4SD16BB device in an alternate ordering or shipment configuration, so it is the most direct candidate for a pin-compatible substitution. Its package suffix indicates a different shipping form rather than a different LQFP body. Before placing an order, verify the reel orientation, pin 1 location, exposed-pad requirements, and device revision in the final manufacturer ordering information.
What is the best equivalent for ATSAM4SD16BB-AN?
For a direct hardware substitution, prioritize devices with the same 64-LQFP footprint, 120 MHz Cortex-M4 core, 1 MB Flash organization, 1.62 V to 3.6 V supply range, and matching peripheral pin assignment. The ATSAM4SD16BB-ANR is the leading same-family candidate. Cross-manufacturer equivalents require a full peripheral, memory, timing, and footprint comparison because a similar CPU speed alone does not establish drop-in compatibility.
When should I choose ATSAM4SD16BB-AN over a different package option?
Choose the ATSAM4SD16BB-AN when the board can accommodate a 64-LQFP 10 mm by 10 mm footprint and the design benefits from its 120 MHz Cortex-M4 core and 1 MB Flash allocation. Smaller package options can simplify board area but may reduce available I/O, change soldering requirements, or alter the peripheral land pattern. The choice should follow mechanical, assembly, test, and long-term procurement requirements.
Is ATSAM4SD16BB-AN suitable for industrial control applications?
The ATSAM4SD16BB-AN is identified as an industrial-temperature, green, Revision B SAM4S microcontroller, making it appropriate for many embedded industrial control designs. Its 1.62 V to 3.6 V operating range supports low-voltage system rails, while the 120 MHz Cortex-M4 core supports responsive control and communication tasks. Final suitability still depends on the complete ambient-temperature rating and system qualification requirements.
What is the ATSAM4SD16BB-AN price?
Use the Request a Quote form on this page for current ATSAM4SD16BB-AN pricing, stock status, and procurement lead time. The component is sold through multiple authorized distribution channels, but prices and inventory can change by date, quantity, and package suffix. The structured listing information on this page provides the latest sourcing reference without embedding a potentially stale price in the technical answer.
Where can I buy ATSAM4SD16BB-AN online?
The ATSAM4SD16BB-AN can be ordered through its manufacturer distribution network, with product listings also maintained by major electronic distributors. For a current quotation, quantity schedule, and confirmed availability, use the Request a Quote form on this page. Include the exact ATSAM4SD16BB-AN suffix when requesting a quotation to avoid confusion with reel, tray, or other package variants.
What is the lead time for ATSAM4SD16BB-AN?
Request the current lead time through the Request a Quote form on this page. Lead time varies with order quantity, factory inventory, date code, authorized-channel availability, and whether the shipment is reel, tray, or another ordering configuration. The manufacturer product page recommends Revision B for new designs and production, making the exact revision status an important item to confirm during procurement.
Is ATSAM4SD16BB-AN in stock?
Current ATSAM4SD16BB-AN inventory should be checked through the Request a Quote form on this page. Search-result snippets can change quickly and may represent distributor inventory, search indexing, or a single warehouse rather than guaranteed global stock. Provide the required quantity, packaging form, date-code preference, and production schedule when requesting availability confirmation.
Does ATSAM4SD16BB-AN support RoHS compliance?
The ATSAM4SD16BB-AN is described as a green, RoHS-compliant Microchip device in its distributor technical listing. RoHS status applies to the specific ordered MPN and its material declaration, while REACH, halogen-free, and conflict-minerals statements should be confirmed separately for the exact shipment configuration. Review the current manufacturer environmental and material documentation before release to production.

Data referensi kejuruteraan untuk ATSAM4SD16BB-AN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ATSAM4SD16BB-AN for a new design that requires a 120 MHz ARM Cortex-M4 microcontroller, 1 MB of Flash, and a 64-LQFP 10 mm by 10 mm footprint. The ATSAM4SD16BB-ANR is the practical drop-in candidate when procurement requires an alternate shipment form; it retains the same core, memory configuration, package body, and stated electrical range, although the reel or tray details must still be checked. Other SAM4SD16 options use QFN or no-lead packages, so they require a different footprint and are not direct replacements. No verified cross-manufacturer 64-LQFP equivalent was identified. Before final selection, verify pin assignment, peripheral availability, internal RAM, temperature limits, lifecycle status, and supply-chain requirements against the manufacturer documentation for the exact suffix.

Perbandingan dengan Gantian

Parametr Produk Ini ATSAM4SD16BB-ANR
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Brand Microchip Technology Microchip Technology
CPU Core ARM Cortex-M4 ARM Cortex-M4
Maximum Frequency 120 MHz 120 MHz
Flash Memory 1 MB (1M x 8) 1 MB (1M x 8)
Operating Voltage 1.62 V to 3.6 V 1.62 V to 3.6 V
Device Revision Revision B Revision B
Temperature Grade Industrial temperature Industrial temperature
Number of Pins 64 pins 64 pins
Green Status Green Green

Penyeberangsung Jelas

  • Maintains the same 120 MHz Cortex-M4 processing configuration (vsATSAM4SD16BB-ANR)
  • Preserves the 64-LQFP board footprint (vsATSAM4SD16BB-ANR)
  • Supports the same low-voltage operating range (vsATSAM4SD16BB-ANR)

Catatan Desain

The ATSAM4SD16BB-AN operates from 1.62 V to 3.6 V. Place the required bypass capacitors close to the device supply pins, connect the exposed thermal and ground features according to the package drawing, and use a supply source that remains within the device limits during startup, sleep, and maximum-frequency operation. Confirm the exact decoupling values and power-up sequence in the manufacturer electrical characteristics before finalizing the BOM.

Preserve the exact 64-LQFP 10 mm by 10 mm land pattern, including pin 1 orientation and lead geometry. Because the device supports up to 120 MHz, route clocks and communication interfaces away from noisy power-switching nodes, provide a continuous ground reference, and avoid long stubs. A four-layer layout with a solid ground plane generally provides a more predictable return path than a two-layer board carrying high-speed signals.

Do not substitute ATSAM4SD16BB-ANR solely because the base MPN is similar. Verify the package dimensions, pin orientation, temperature grade, reel direction, revision marking, and ordering flow. Likewise, do not assume that the 1.62 V minimum supply can be applied to every peripheral on the board; each external device and signal line must tolerate the selected operating voltage or include appropriate level translation.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The ATSAM4SD16BB-AN is identified as a green, RoHS-compliant device. Other environmental and material declarations should be confirmed for the exact orderable configuration.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

atsam4sd16bb uur ATSAM4SD16BB-AN datasheet ATSAM4SD16BB-AN pinout ATSAM4SD16BB-AN datasheet pdf ATSAM4SD16BB-AN equivalent ATSAM4SD16BB-AN replacement ATSAM4SD16BB-AN vs ATSAM4SD16BB-ANR ATSAM4SD16BB-AN 120MHz Cortex-M4 ATSAM4SD16BB-AN LQFP-64 pinout ATSAM4SD16BB-AN price ATSAM4SD16BB-AN stock Microchip ATSAM4SD16BB-AN

Komponen dan Tanda berkaitan

Microchip Technology ATSAM4SD16BB-AN ATSAM4SD16BB-ANR ATSAM4SD16B SAM4S ARM Cortex-M4 32-bit RISC microcontroller embedded microcontroller system-on-chip semiconductor Flash memory 1M x 8 Flash LQFP-64 10 mm x 10 mm LQFP surface-mount technology SMD package 120 MHz clock 1.62 V to 3.6 V operating voltage industrial control data acquisition instrumentation embedded communications RoHS green lead-free device
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ