ATSAM4SD16BB-AN 120MHz Cortex-M4 1MB Flash LQFP-64 | Microchip
Артикул: ATSAM4SD16BB-AN ✓ АктивенATSAM4SD16BB-AN Обзор
A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, peripherals, and input/output interfaces into one component. The ATSAM4SD16BB-AN belongs to the SAM4S family of Cortex-M4 devices, combining a 32-bit ARM processing core with embedded control peripherals for industrial, communications, instrumentation, and embedded-system products. Its 64-LQFP package provides a practical option for designs requiring more external signal access than smaller microcontroller packages.
The device provides a maximum operating frequency of 120 MHz and 1 MB of Flash memory organized as 1M x 8, as identified by the manufacturer and distributor product listings. The operating voltage range is 1.62 V to 3.6 V, making it suitable for low-voltage embedded systems. The ATSAM4SD16BB-AN is identified as an industrial-temperature, green, LQFP, Revision B ordering variant.
The SAM4S architecture integrates a high-performance 32-bit ARM Cortex-M4 core with embedded peripherals for communications, control, timing, and data acquisition. Revision B is the recommended device revision for new designs, prototypes, and production according to the Microchip product page. The wide operating-voltage range supports designs operating from regulated 3.3 V systems and lower-voltage power domains when the surrounding circuitry and firmware are designed accordingly.
Typical applications include industrial monitoring, factory automation, communications equipment, data acquisition systems, motor and equipment control, and embedded instrumentation. The 1 MB Flash capacity is useful for firmware, configuration tables, calibration data, and application logic, while the 64-pin package provides access to the device's peripheral and interface resources.
When laying out a board for the ATSAM4SD16BB-AN, preserve the LQFP-64 footprint, follow the manufacturer pin-assignment table, provide suitable decoupling at the supply pins, and route high-speed or sensitive signals with short return paths. The 120 MHz operating rate makes trace layout, grounding, and clock implementation important for reliable operation.
This product page consolidates the manufacturer device definition, package and memory details, sourcing information, drop-in alternatives, and practical integration guidance. Use the ATSAM4SD16BB-AN when a project requires a 120 MHz Cortex-M4 MCU with 1 MB Flash in a 64-LQFP industrial package.
Аналоги без доработки для ATSAM4SD16BB-AN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
ATSAM4SD16BB-ANR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATSAM4SD16BB-AN Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Operating Voltage Range | 1.62 V to 3.6 V |
| Корпус | 64-LQFP (10 mm x 10 mm) |
| Core | ARM Cortex-M4 |
| Architecture | 32-bit RISC |
| Product Family | SAM4S |
| Device Revision | Revision B |
| Temperature Grade | Industrial temperature |
| Тип монтажа | Surface mount |
| Количество выводов | 64 pins |
| Lead-Free Status | Green |
| Статус RoHS | Compliant |
| Datasheet Pinout | Use the manufacturer pin-description table for the 64-LQFP footprint |
Руководство по цоколевке ATSAM4SD16BB-AN в корпусе 64-lqfp (10 mm x 10 mm)
Цоколевка для ATSAM4SD16BB-AN (корпус 64-lqfp (10 mm x 10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATSAM4SD16BB-AN.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATSAM4SD16BB-AN подходит для 6 применениеs: Industrial Monitoring and Control, Data Acquisition Systems, Communications Equipment, Motor and Equipment Control, Instrumentation and Test Equipment, Embedded Products with Local Storage.
Industrial Monitoring and Control
The ATSAM4SD16BB-AN suits industrial monitoring systems that combine sensor acquisition, local logic, and communications in a 10 mm by 10 mm LQFP-64 footprint. Its 120 MHz Cortex-M4 core provides computational headroom for filtering, diagnostics, and control loops, while 1 MB of Flash stores application firmware, configuration, and calibration information. The 1.62 V to 3.6 V operating range supports low-voltage industrial electronics when paired with appropriately rated sensors and communication interfaces. Firmware should include watchdog recovery, brownout handling, and periodic integrity checks because unattended equipment must continue operating safely after transient disturbances.
Рекомендуется
Data Acquisition Systems
The ATSAM4SD16BB-AN can serve as the central controller in a compact data-acquisition module that samples multiple analog channels, timestamps measurements, and transfers results to a host. The 120 MHz Cortex-M4 core can manage peripheral servicing and communication while 1 MB of Flash provides room for calibration tables and buffering logic. Its 64-LQFP package exposes more I/O than compact packages, helping separate communication, control, and analog-support signals. For designs requiring higher-resolution conversion, an external ADC such as the MCP3301T-BI/SN can complement the MCU while the controller performs system-level timing and data formatting.
Рекомендуется
Communications Equipment
The ATSAM4SD16BB-AN fits embedded communications equipment that requires deterministic control alongside serial data handling. Its Cortex-M4 processor runs at up to 120 MHz, providing enough performance for protocol management, framing, buffer control, and supervisory logic. The 1.62 V to 3.6 V supply range can simplify integration with modern low-voltage interface devices, while the 64-pin LQFP offers separate connections for serial interfaces, status indicators, reset, and control signals. Designers should budget peripheral functions carefully because an MCU replacement is valid only when its UART, SPI, I2C, timer, and interrupt mapping match the original board.
Рекомендуется
Motor and Equipment Control
The ATSAM4SD16BB-AN is suitable for equipment-control boards that coordinate sensors, actuators, interlocks, and operator communications. The 120 MHz Cortex-M4 core can execute control algorithms alongside interrupt-driven input handling, and the 1 MB Flash capacity is sufficient for larger application programs and configuration data. Its 64-LQFP footprint provides a practical balance between board area and pin availability, while the 1.62 V to 3.6 V range supports partitioned low-voltage rails. The implementation should include hardware shutdown paths and watchdog recovery so a firmware fault cannot leave powered machinery in an unsafe state.
Рекомендуется
Instrumentation and Test Equipment
The ATSAM4SD16BB-AN can act as the control processor in compact instrumentation requiring calibrated measurements, local adjustment, and a reliable user interface. Its high-performance Cortex-M4 core supports real-time sampling, filtering, and protocol processing, while 1 MB of Flash accommodates firmware, instrument tables, and test sequences. The LQFP-64 package supports a conventional PCB assembly process and exposes enough pins for control signals, communication, displays, and analog front-end support. In metrology-oriented designs, calibration data should be stored in protected memory and validated through the instrument startup routine before measurements are accepted.
Рекомендуется
Embedded Products with Local Storage
The ATSAM4SD16BB-AN is appropriate for embedded products that need meaningful onboard program storage for application code, configuration, diagnostic logs, and calibration parameters. Its 1 MB 1M x 8 Flash organization gives software designers room beyond a minimal bootloader, while the 120 MHz Cortex-M4 core handles control and communication tasks. The 64-LQFP package is compatible with conventional reflow assembly and provides a generous pin count for sensors, local storage interfaces, and status controls. Firmware architecture should include version identification, rollback protection, and a field-update path that verifies image integrity before replacing the active application.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATSAM4SD16BB-AN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATSAM4SD16BB-ANR |
|---|---|---|
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Brand | Microchip Technology | Microchip Technology |
| CPU Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 120 MHz | 120 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB (1M x 8) |
| Operating Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Device Revision | Revision B | Revision B |
| Temperature Grade | Industrial temperature | Industrial temperature |
| Number of Pins | 64 pins | 64 pins |
| Green Status | Green | Green |
Ключевые отличия
- Maintains the same 120 MHz Cortex-M4 processing configuration (против ATSAM4SD16BB-ANR)
- Preserves the 64-LQFP board footprint (против ATSAM4SD16BB-ANR)
- Supports the same low-voltage operating range (против ATSAM4SD16BB-ANR)
Заметки по проектированию
The ATSAM4SD16BB-AN operates from 1.62 V to 3.6 V. Place the required bypass capacitors close to the device supply pins, connect the exposed thermal and ground features according to the package drawing, and use a supply source that remains within the device limits during startup, sleep, and maximum-frequency operation. Confirm the exact decoupling values and power-up sequence in the manufacturer electrical characteristics before finalizing the BOM.
Preserve the exact 64-LQFP 10 mm by 10 mm land pattern, including pin 1 orientation and lead geometry. Because the device supports up to 120 MHz, route clocks and communication interfaces away from noisy power-switching nodes, provide a continuous ground reference, and avoid long stubs. A four-layer layout with a solid ground plane generally provides a more predictable return path than a two-layer board carrying high-speed signals.
Do not substitute ATSAM4SD16BB-ANR solely because the base MPN is similar. Verify the package dimensions, pin orientation, temperature grade, reel direction, revision marking, and ordering flow. Likewise, do not assume that the 1.62 V minimum supply can be applied to every peripheral on the board; each external device and signal line must tolerate the selected operating voltage or include appropriate level translation.
Информация о соответствии
The ATSAM4SD16BB-AN is identified as a green, RoHS-compliant device. Other environmental and material declarations should be confirmed for the exact orderable configuration.